Quelle yts814.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  YTS814.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "YTS814.SCO") calling SQL
      * procedures in file "YTS814.MCO".

      *Copyright 1996 National Computing Centre Ltd,
      *and Computer Logic R&D S.A
      *on behalf of CTS5 SQL2 Project.
      *All rights reserved.
      *The CTS5 SQL2 Project is sponsored by the European Community.
      *
      *The National Computing Centre Limited and Computer Logic R&D
      *have given permission to NIST to distribute this program
      *over the World Wide Web in order to promote SQL standards.
      *DISCLAIMER:
      *This program was reviewed by employees of NIST for
      *conformance to the SQL standards.
      *NIST assumes no responsibility for any party's use of
      *this program.

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * SQL VALIDATION TEST SUITE V6.0
      *
      * YTS814.SCO
      * WRITTEN BY:  Susan Watters
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *
      * This routine tests <module character set specification>
      *
      *
      * REFERENCES
      *   12.2        <module name clause>
      *   5.3 SR.6a    <literal>
      *   5.4 SR.1a    Names and identifiers
      *   6.1 GR.1     <data types>
      *   19.1 SR.14b  <embedded SQL host program>,derived<module>
      *   F#45        Character set definition
      *   F#46        Named character sets
      *   F#3         Basic schema manipulation
      *   F#2         Basic information schema
      *
      * DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
      *
      * QA Status: Full FC
      *
      * Revised by DWF 1996-04-04
      *   Added rollback after authid
      *   Added timestamp
      *   Added FIPS
      *   Cleanups
      *   Fixed printouts
      *   Fixed test reporting
      *   Fixed cursor usage
      *   Fixed SDL transactions
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  co PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  co2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  co3 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  val1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  val2 PIC  X(1).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "CTS1 " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, yts814.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST7571 *******************
             MOVE 1 TO flag

             DISPLAY " FIPS TEST7571 "
             DISPLAY " "
             DISPLAY "References:"
             DISPLAY " 12.2
             DISPLAY " 5.3 SR.6a "
             DISPLAY " 5.4 SR.1a Names and identifiers"
             DISPLAY " 6.1 GR.1 "
             DISPLAY " 19.1 SR.14b ,"
             DISPLAY " derived "
             DISPLAY " F#45 Character set definition"
             DISPLAY " F#46 Named character sets"
             DISPLAY " F#3 Basic schema manipulation"
             DISPLAY " F#2 Basic information schema"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             DISPLAY "!!!!!! This program requires the use of
      -    " characters"
             DISPLAY "in the LATIN1 character set.!!!!!! "

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *initialise all host variables
             MOVE 99 TO co
             MOVE 99 TO co2
             MOVE 99 TO co3

      *The names of the table and both its columns
      *include letters from LATIN1

             DISPLAY "CREATE TABLE TAB��"
             DISPLAY "(COL� INTEGER,"
             DISPLAY "COL� CHAR(1) CHARACTER SET ASCII_GRAPHIC);"
      *  EXEC SQL CREATE TABLE TAB��
      *    (COL� INTEGER,
      *    COL� CHAR(1) CHARACTER SET ASCII_GRAPHIC);
             CALL "SUB3" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB4" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "SELECT COUNT (*) INTO :co"
             DISPLAY "FROM INFORMATION_SCHEMA.TABLES"
             DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND"
             DISPLAY "TABLE_NAME = 'TAB��';"
      *  EXEC SQL SELECT COUNT (*) INTO :co
      *    FROM INFORMATION_SCHEMA.TABLES
      *    WHERE TABLE_SCHEMA = 'CTS1' AND
      *    TABLE_NAME = 'TAB��';
             CALL "SUB5" USING SQLCODE SQLSTATE co
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "co should be 1; its value is ", co
             if (co  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT (*) INTO :co2"
             DISPLAY "FROM INFORMATION_SCHEMA.COLUMNS"
             DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND"
             DISPLAY "TABLE_NAME = 'TAB��' AND"
             DISPLAY "COLUMN_NAME = 'COL�';"
      *  EXEC SQL SELECT COUNT (*) INTO :co2
      *    FROM INFORMATION_SCHEMA.COLUMNS
      *    WHERE TABLE_SCHEMA = 'CTS1' AND
      *    TABLE_NAME = 'TAB��' AND
      *    COLUMN_NAME = 'COL�';
             CALL "SUB6" USING SQLCODE SQLSTATE co2
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "co2 should be 1; its value is ", co2
             if (co2  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "SELECT COUNT (*) INTO :co3"
             DISPLAY "FROM INFORMATION_SCHEMA.COLUMNS"
             DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND"
             DISPLAY "TABLE_NAME = 'TAB��' AND"
             DISPLAY "COLUMN_NAME = 'COL�';"
      *  EXEC SQL SELECT COUNT (*) INTO :co3
      *    FROM INFORMATION_SCHEMA.COLUMNS
      *    WHERE TABLE_SCHEMA = 'CTS1' AND
      *    TABLE_NAME = 'TAB��' AND
      *    COLUMN_NAME = 'COL�';
             CALL "SUB7" USING SQLCODE SQLSTATE co3
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "co3 should be 1; its value is ", co3
             if (co3  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "INSERT INTO TAB�� VALUES"
             DISPLAY "(1, _ASCII_GRAPHIC '#')"
      *  EXEC SQL INSERT INTO TAB�� VALUES
      *    (1, _ASCII_GRAPHIC '#');
             CALL "SUB8" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 2 TO val1
             DISPLAY "val1 = 2;"
             MOVE "^" TO val2
             DISPLAY "val2 = '^'"

             DISPLAY "INSERT INTO TAB�� VALUES"
             DISPLAY "(:val1, :val2);"
      *  EXEC SQL INSERT INTO TAB�� VALUES
      *    (:val1, :val2);
             CALL "SUB9" USING SQLCODE SQLSTATE val1 val2
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO TAB�� VALUES"
             DISPLAY "(3, _LATIN1 '�');"
      *  EXEC SQL INSERT INTO TAB�� VALUES
      *    (3, _LATIN1 '�');
             CALL "SUB10" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

      *that should cause a data exception - character not
      *in reportoire - code 22021

             DISPLAY "SQLSTATE should be 22021; its value is ", SQLSTATE
             if (SQLSTATE  NOT  =   "22021") then
               MOVE 0 TO flag
             END-IF

      *reinitialise host variables

             MOVE 4 TO val1
             MOVE "�" TO val2
             DISPLAY "val1 = 4;"
             DISPLAY "val2 = '�';"

             DISPLAY "INSERT INTO TAB�� VALUES"
             DISPLAY "(:val1, :val2);"
      *  EXEC SQL INSERT INTO TAB�� VALUES
      *    (:val1, :val2);
             CALL "SUB11" USING SQLCODE SQLSTATE val1 val2
             MOVE SQLCODE TO SQL-COD

      *that should cause a data exception - character not
      *in reportoire - code 22021

             DISPLAY "SQLSTATE should be 22021; its value is ", SQLSTATE
             if (SQLSTATE  NOT  =   "22021") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "DECLARE AA CURSOR FOR"
             DISPLAY "SELECT COL�, COL� FROM TAB��"
             DISPLAY "ORDER BY COL�"
      *  EXEC SQL DECLARE AA CURSOR FOR
      *    SELECT COL�, COL� FROM TAB��
      *    ORDER BY COL� END-EXEC

             DISPLAY "OPEN AA;"
      *  EXEC SQL OPEN AA;
             CALL "SUB12" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 99 TO val1
             MOVE "x" TO val2
             DISPLAY "FETCH AA INTO :val1, :val2;"
      *  EXEC SQL FETCH AA INTO :val1, :val2;
             CALL "SUB13" USING SQLCODE SQLSTATE val1 val2
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "val1 should be 1; its value is ", val1
             DISPLAY "val2 should be #; its value is ", val2
             if (val1  NOT =  1  OR  val2  NOT  =   "#") then
               MOVE 0 TO flag
             END-IF

             MOVE 99 TO val1
             MOVE "x" TO val2
             DISPLAY "FETCH AA INTO :val1, :val2;"
      *  EXEC SQL FETCH AA INTO :val1, :val2;
             CALL "SUB14" USING SQLCODE SQLSTATE val1 val2
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY "val1 should be 2; its value is ", val1
             DISPLAY "val2 should be ^; its value is ", val2
             if (val1  NOT =  2  OR  val2  NOT  =   "^") then
               MOVE 0 TO flag
             END-IF

      *  EXEC SQL FETCH AA INTO :val1, :val2;
             CALL "SUB15" USING SQLCODE SQLSTATE val1 val2
             MOVE SQLCODE TO SQL-COD

      *that should produce a no data excepetion which is
      *SQLSTATE 02000

             DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT =  100  OR  NORMSQ  NOT  =   "02000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "02000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB16" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DROP TABLE TAB�� CASCADE;"
      *  EXEC SQL DROP TABLE TAB�� CASCADE;
             CALL "SUB17" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB18" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7571','pass','MCO');
               CALL "SUB19" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " yts814.mco *** fail *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7571','fail','MCO');
               CALL "SUB20" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB21" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

      ******************** END TEST7571 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality99%

¤ Dauer der Verarbeitung: 0.6 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.