Quelle RectAbsolute.h Sprache: C

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#ifndef MOZILLA_GFX_RECT_ABSOLUTE_H_
#define MOZILLA_GFX_RECT_ABSOLUTE_H_

#include <algorithm>
#include <cstdint>

#include "mozilla/Attributes.h"
#include "Point.h"
#include "Rect.h"
#include "Types.h"

namespace mozilla {

template <typename>
struct IsPixel;

namespace gfx {

/**
* A RectAbsolute is similar to a Rect (see BaseRect.h), but represented as
* (x1, y1, x2, y2) instead of (x, y, width, height).
*
* Unless otherwise indicated, methods on this class correspond
* to methods on BaseRect.
*
* The API is currently very bare-bones; it may be extended as needed.
*
* Do not use this class directly. Subclass it, pass that subclass as the
* Sub parameter, and only use that subclass.
*/
template <class T, class Sub, class Point, class Rect>
struct BaseRectAbsolute {
protected:
  T left, top, right, bottom;

public:
  BaseRectAbsolute() : left(0), top(0), right(0), bottom(0) {}
  BaseRectAbsolute(T aLeft, T aTop, T aRight, T aBottom)
      : left(aLeft), top(aTop), right(aRight), bottom(aBottom) {}

  MOZ_ALWAYS_INLINE T X() const { return left; }
  MOZ_ALWAYS_INLINE T Y() const { return top; }
  MOZ_ALWAYS_INLINE T Width() const { return right - left; }
  MOZ_ALWAYS_INLINE T Height() const { return bottom - top; }
  MOZ_ALWAYS_INLINE T XMost() const { return right; }
  MOZ_ALWAYS_INLINE T YMost() const { return bottom; }
  MOZ_ALWAYS_INLINE const T& Left() const { return left; }
  MOZ_ALWAYS_INLINE const T& Right() const { return right; }
  MOZ_ALWAYS_INLINE const T& Top() const { return top; }
  MOZ_ALWAYS_INLINE const T& Bottom() const { return bottom; }
  MOZ_ALWAYS_INLINE T& Left() { return left; }
  MOZ_ALWAYS_INLINE T& Right() { return right; }
  MOZ_ALWAYS_INLINE T& Top() { return top; }
  MOZ_ALWAYS_INLINE T& Bottom() { return bottom; }
  T Area() const { return Width() * Height(); }

  void Inflate(T aD) { Inflate(aD, aD); }
  void Inflate(T aDx, T aDy) {
    left -= aDx;
    top -= aDy;
    right += aDx;
    bottom += aDy;
  }

  MOZ_ALWAYS_INLINE void SetBox(T aLeft, T aTop, T aRight, T aBottom) {
    left = aLeft;
    top = aTop;
    right = aRight;
    bottom = aBottom;
  }
  void SetLeftEdge(T aLeft) { left = aLeft; }
  void SetRightEdge(T aRight) { right = aRight; }
  void SetTopEdge(T aTop) { top = aTop; }
  void SetBottomEdge(T aBottom) { bottom = aBottom; }

  static Sub FromRect(const Rect& aRect) {
    if (aRect.Overflows()) {
      return Sub();
    }
    return Sub(aRect.x, aRect.y, aRect.XMost(), aRect.YMost());
  }

  [[nodiscard]] Sub Intersect(const Sub& aOther) const {
    Sub result;
    result.left = std::max<T>(left, aOther.left);
    result.top = std::max<T>(top, aOther.top);
    result.right = std::min<T>(right, aOther.right);
    result.bottom = std::min<T>(bottom, aOther.bottom);
    if (result.right < result.left || result.bottom < result.top) {
      result.SizeTo(0, 0);
    }
    return result;
  }

  bool IsEmpty() const { return right <= left || bottom <= top; }

  bool IsEqualEdges(const Sub& aOther) const {
    return left == aOther.left && top == aOther.top && right == aOther.right &&
           bottom == aOther.bottom;
  }

  bool IsEqualInterior(const Sub& aRect) const {
    return IsEqualEdges(aRect) || (IsEmpty() && aRect.IsEmpty());
  }

  MOZ_ALWAYS_INLINE void MoveBy(T aDx, T aDy) {
    left += aDx;
    right += aDx;
    top += aDy;
    bottom += aDy;
  }
  MOZ_ALWAYS_INLINE void MoveBy(const Point& aPoint) {
    left += aPoint.x;
    right += aPoint.x;
    top += aPoint.y;
    bottom += aPoint.y;
  }
  MOZ_ALWAYS_INLINE void SizeTo(T aWidth, T aHeight) {
    right = left + aWidth;
    bottom = top + aHeight;
  }

  bool Contains(const Sub& aRect) const {
    return aRect.IsEmpty() || (left <= aRect.left && aRect.right <= right &&
                               top <= aRect.top && aRect.bottom <= bottom);
  }
  bool Contains(T aX, T aY) const {
    return (left <= aX && aX < right && top <= aY && aY < bottom);
  }

  bool Intersects(const Sub& aRect) const {
    return !IsEmpty() && !aRect.IsEmpty() && left < aRect.right &&
           aRect.left < right && top < aRect.bottom && aRect.top < bottom;
  }

  void SetEmpty() { left = right = top = bottom = 0; }

  // Returns the smallest rectangle that contains both the area of both
  // this and aRect. Thus, empty input rectangles are ignored.
  // Note: if both rectangles are empty, returns aRect.
  // WARNING! This is not safe against overflow, prefer using SafeUnion instead
  // when dealing with int-based rects.
  [[nodiscard]] Sub Union(const Sub& aRect) const {
    if (IsEmpty()) {
      return aRect;
    } else if (aRect.IsEmpty()) {
      return *static_cast<const Sub*>(this);
    } else {
      return UnionEdges(aRect);
    }
  }
  // Returns the smallest rectangle that contains both the points (including
  // edges) of both aRect1 and aRect2.
  // Thus, empty input rectangles are allowed to affect the result.
  // WARNING! This is not safe against overflow, prefer using SafeUnionEdges
  // instead when dealing with int-based rects.
  [[nodiscard]] Sub UnionEdges(const Sub& aRect) const {
    Sub result;
    result.left = std::min(left, aRect.left);
    result.top = std::min(top, aRect.top);
    result.right = std::max(XMost(), aRect.XMost());
    result.bottom = std::max(YMost(), aRect.YMost());
    return result;
  }

  // Scale 'this' by aScale without doing any rounding.
  void Scale(T aScale) { Scale(aScale, aScale); }
  // Scale 'this' by aXScale and aYScale, without doing any rounding.
  void Scale(T aXScale, T aYScale) {
    right = XMost() * aXScale;
    bottom = YMost() * aYScale;
    left = left * aXScale;
    top = top * aYScale;
  }
  // Scale 'this' by aScale, converting coordinates to integers so that the
  // result is the smallest integer-coordinate rectangle containing the
  // unrounded result. Note: this can turn an empty rectangle into a non-empty
  // rectangle
  void ScaleRoundOut(double aScale) { ScaleRoundOut(aScale, aScale); }
  // Scale 'this' by aXScale and aYScale, converting coordinates to integers so
  // that the result is the smallest integer-coordinate rectangle containing the
  // unrounded result.
  // Note: this can turn an empty rectangle into a non-empty rectangle
  void ScaleRoundOut(double aXScale, double aYScale) {
    right = static_cast<T>(ceil(double(XMost()) * aXScale));
    bottom = static_cast<T>(ceil(double(YMost()) * aYScale));
    left = static_cast<T>(floor(double(left) * aXScale));
    top = static_cast<T>(floor(double(top) * aYScale));
  }
  // Scale 'this' by aScale, converting coordinates to integers so that the
  // result is the largest integer-coordinate rectangle contained by the
  // unrounded result.
  void ScaleRoundIn(double aScale) { ScaleRoundIn(aScale, aScale); }
  // Scale 'this' by aXScale and aYScale, converting coordinates to integers so
  // that the result is the largest integer-coordinate rectangle contained by
  // the unrounded result.
  void ScaleRoundIn(double aXScale, double aYScale) {
    right = static_cast<T>(floor(double(XMost()) * aXScale));
    bottom = static_cast<T>(floor(double(YMost()) * aYScale));
    left = static_cast<T>(ceil(double(left) * aXScale));
    top = static_cast<T>(ceil(double(top) * aYScale));
  }
  // Scale 'this' by 1/aScale, converting coordinates to integers so that the
  // result is the smallest integer-coordinate rectangle containing the
  // unrounded result. Note: this can turn an empty rectangle into a non-empty
  // rectangle
  void ScaleInverseRoundOut(double aScale) {
    ScaleInverseRoundOut(aScale, aScale);
  }
  // Scale 'this' by 1/aXScale and 1/aYScale, converting coordinates to integers
  // so that the result is the smallest integer-coordinate rectangle containing
  // the unrounded result. Note: this can turn an empty rectangle into a
  // non-empty rectangle
  void ScaleInverseRoundOut(double aXScale, double aYScale) {
    right = static_cast<T>(ceil(double(XMost()) / aXScale));
    bottom = static_cast<T>(ceil(double(YMost()) / aYScale));
    left = static_cast<T>(floor(double(left) / aXScale));
    top = static_cast<T>(floor(double(top) / aYScale));
  }
  // Scale 'this' by 1/aScale, converting coordinates to integers so that the
  // result is the largest integer-coordinate rectangle contained by the
  // unrounded result.
  void ScaleInverseRoundIn(double aScale) {
    ScaleInverseRoundIn(aScale, aScale);
  }
  // Scale 'this' by 1/aXScale and 1/aYScale, converting coordinates to integers
  // so that the result is the largest integer-coordinate rectangle contained by
  // the unrounded result.
  void ScaleInverseRoundIn(double aXScale, double aYScale) {
    right = static_cast<T>(floor(double(XMost()) / aXScale));
    bottom = static_cast<T>(floor(double(YMost()) / aYScale));
    left = static_cast<T>(ceil(double(left) / aXScale));
    top = static_cast<T>(ceil(double(top) / aYScale));
  }

  /**
   * Translate this rectangle to be inside aRect. If it doesn't fit inside
   * aRect then the dimensions that don't fit will be shrunk so that they
   * do fit. The resulting rect is returned.
   */
  [[nodiscard]] Sub MoveInsideAndClamp(const Sub& aRect) const {
    T newLeft = std::max(aRect.left, left);
    T newTop = std::max(aRect.top, top);
    T width = std::min(aRect.Width(), Width());
    T height = std::min(aRect.Height(), Height());
    Sub rect(newLeft, newTop, newLeft + width, newTop + height);
    newLeft = std::min(rect.right, aRect.right) - width;
    newTop = std::min(rect.bottom, aRect.bottom) - height;
    rect.MoveBy(newLeft - rect.left, newTop - rect.top);
    return rect;
  }

  friend std::ostream& operator<<(
      std::ostream& stream,
      const BaseRectAbsolute<T, Sub, Point, Rect>& aRect) {
    return stream << "(l=" << aRect.left << ", t=" << aRect.top
                  << ", r=" << aRect.right << ", b=" << aRect.bottom << ')';
  }
};

template <class Units>
struct IntRectAbsoluteTyped
    : public BaseRectAbsolute<int32_t, IntRectAbsoluteTyped<Units>,
                              IntPointTyped<Units>, IntRectTyped<Units>>,
      public Units {
  static_assert(IsPixel<Units>::value,
                "'units' must be a coordinate system tag");
  typedef BaseRectAbsolute<int32_t, IntRectAbsoluteTyped<Units>,
                           IntPointTyped<Units>, IntRectTyped<Units>>
      Super;
  typedef IntParam<int32_t> ToInt;

  IntRectAbsoluteTyped() : Super() {}
  IntRectAbsoluteTyped(ToInt aLeft, ToInt aTop, ToInt aRight, ToInt aBottom)
      : Super(aLeft.value, aTop.value, aRight.value, aBottom.value) {}
};

template <class Units>
struct RectAbsoluteTyped
    : public BaseRectAbsolute<Float, RectAbsoluteTyped<Units>,
                              PointTyped<Units>, RectTyped<Units>>,
      public Units {
  static_assert(IsPixel<Units>::value,
                "'units' must be a coordinate system tag");
  typedef BaseRectAbsolute<Float, RectAbsoluteTyped<Units>, PointTyped<Units>,
                           RectTyped<Units>>
      Super;

  RectAbsoluteTyped() : Super() {}
  RectAbsoluteTyped(Float aLeft, Float aTop, Float aRight, Float aBottom)
      : Super(aLeft, aTop, aRight, aBottom) {}
};

typedef IntRectAbsoluteTyped<UnknownUnits> IntRectAbsolute;

}  // namespace gfx
}  // namespace mozilla

#endif /* MOZILLA_GFX_RECT_ABSOLUTE_H_ */

quality100%

¤ Dauer der Verarbeitung: 0.1 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.