Quelle TestPLDHash.cpp Sprache: C

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "PLDHashTable.h"
#include "gtest/gtest.h"
#include "mozilla/gtest/MozHelpers.h"

// This test mostly focuses on edge cases. But more coverage of normal
// operations wouldn't be a bad thing.

#ifdef XP_UNIX
#  include <unistd.h>
#  include <sys/types.h>
#  include <sys/wait.h>
#endif

// We can test that certain operations cause expected aborts by forking
// and then checking that the child aborted in the expected way (i.e. via
// MOZ_CRASH). We skip this for the following configurations.
// - On Windows, because it doesn't have fork().
// - On non-DEBUG builds, because the crashes cause the crash reporter to pop
//   up when running this test locally, which is surprising and annoying.
// - On ASAN builds, because ASAN alters the way a MOZ_CRASHing process
//   terminates, which makes it harder to test if the right thing has occurred.
static void TestCrashyOperation(const char* label, void (*aCrashyOperation)()) {
#if defined(XP_UNIX) && defined(DEBUG) && !defined(MOZ_ASAN)
  // We're about to trigger a crash. When it happens don't pause to allow GDB
  // to be attached.
  SAVE_GDB_SLEEP_LOCAL();

  int pid = fork();
  ASSERT_NE(pid, -1);

  if (pid == 0) {
    // Disable the crashreporter -- writing a crash dump in the child will
    // prevent the parent from writing a subsequent dump. Crashes here are
    // expected, so we don't want their stacks to show up in the log anyway.
    mozilla::gtest::DisableCrashReporter();

    // Child: perform the crashy operation.
    FILE* stderr_dup = fdopen(dup(fileno(stderr)), "w");
    // We don't want MOZ_CRASH from the crashy operation to print out its
    // error message and stack-trace, which would be confusing and irrelevant.
    fclose(stderr);
    aCrashyOperation();
    fprintf(stderr_dup, "TestCrashyOperation %s: didn't crash?!\n", label);
    ASSERT_TRUE(false);  // shouldn't reach here
  }

  // Parent: check that child crashed as expected.
  int status;
  ASSERT_NE(waitpid(pid, &status, 0), -1);

  // The path taken here depends on the platform and configuration.
  ASSERT_TRUE(WIFEXITED(status) || WTERMSIG(status));
  if (WIFEXITED(status)) {
    // This occurs if the ah_crap_handler() is run, i.e. we caught the crash.
    // It returns the number of the caught signal.
    int signum = WEXITSTATUS(status);
    if (signum != SIGSEGV && signum != SIGBUS) {
      fprintf(stderr, "TestCrashyOperation %s: 'exited' failure: %d\n", label,
              signum);
      ASSERT_TRUE(false);
    }
  } else if (WIFSIGNALED(status)) {
    // This one occurs if we didn't catch the crash. The exit code is the
    // number of the terminating signal.
    int signum = WTERMSIG(status);
    if (signum != SIGSEGV && signum != SIGBUS) {
      fprintf(stderr, "TestCrashyOperation %s: 'signaled' failure: %d\n", label,
              signum);
      ASSERT_TRUE(false);
    }
  }

  RESTORE_GDB_SLEEP_LOCAL();
#endif
}

static void InitCapacityOk_InitialLengthTooBig() {
  PLDHashTable t(PLDHashTable::StubOps(), sizeof(PLDHashEntryStub),
                 PLDHashTable::kMaxInitialLength + 1);
}

static void InitCapacityOk_InitialEntryStoreTooBig() {
  // Try the smallest disallowed power-of-two entry store size, which is 2^32
  // bytes (which overflows to 0). (Note that the 2^23 *length* gets converted
  // to a 2^24 *capacity*.)
  PLDHashTable t(PLDHashTable::StubOps(), (uint32_t)1 << 8, (uint32_t)1 << 23);
}

static void InitCapacityOk_EntrySizeTooBig() {
  // Try the smallest disallowed entry size, which is 256 bytes.
  PLDHashTable t(PLDHashTable::StubOps(), 256);
}

TEST(PLDHashTableTest, InitCapacityOk)
{
  // Try the largest allowed capacity.  With kMaxCapacity==1<<26, this
  // would allocate (if we added an element) 0.5GB of entry store on 32-bit
  // platforms and 1GB on 64-bit platforms.
  PLDHashTable t1(PLDHashTable::StubOps(), sizeof(PLDHashEntryStub),
                  PLDHashTable::kMaxInitialLength);

  // Try the largest allowed power-of-two entry store size, which is 2^31 bytes
  // (Note that the 2^23 *length* gets converted to a 2^24 *capacity*.)
  PLDHashTable t2(PLDHashTable::StubOps(), (uint32_t)1 << 7, (uint32_t)1 << 23);

  // Try a too-large capacity (which aborts).
  TestCrashyOperation("length too big", InitCapacityOk_InitialLengthTooBig);

  // Try a large capacity combined with a large entry size that when multiplied
  // overflow (causing abort).
  TestCrashyOperation("entry store too big",
                      InitCapacityOk_InitialEntryStoreTooBig);

  // Try the largest allowed entry size.
  PLDHashTable t3(PLDHashTable::StubOps(), 255);

  // Try an overly large entry size.
  TestCrashyOperation("entry size too big", InitCapacityOk_EntrySizeTooBig);

  // Ideally we'd also try a large-but-ok capacity that almost but doesn't
  // quite overflow, but that would result in allocating slightly less than 4
  // GiB of entry storage. That would be very likely to fail on 32-bit
  // platforms, so such a test wouldn't be reliable.
}

TEST(PLDHashTableTest, LazyStorage)
{
  PLDHashTable t(PLDHashTable::StubOps(), sizeof(PLDHashEntryStub));

  // PLDHashTable allocates entry storage lazily. Check that all the non-add
  // operations work appropriately when the table is empty and the storage
  // hasn't yet been allocated.

  ASSERT_EQ(t.Capacity(), 0u);
  ASSERT_EQ(t.EntrySize(), sizeof(PLDHashEntryStub));
  ASSERT_EQ(t.EntryCount(), 0u);
  ASSERT_EQ(t.Generation(), 0u);

  ASSERT_TRUE(!t.Search((const void*)1));

  // No result to check here, but call it to make sure it doesn't crash.
  t.Remove((const void*)2);

  for (auto iter = t.Iter(); !iter.Done(); iter.Next()) {
    ASSERT_TRUE(false);  // shouldn't hit this on an empty table
  }

  ASSERT_EQ(t.ShallowSizeOfExcludingThis(moz_malloc_size_of), 0u);
}

// A trivial hash function is good enough here. It's also super-fast for the
// GrowToMaxCapacity test because we insert the integers 0.., which means it's
// collision-free.
static PLDHashNumber TrivialHash(const void* key) {
  return (PLDHashNumber)(size_t)key;
}

static void TrivialInitEntry(PLDHashEntryHdr* aEntry, const void* aKey) {
  auto entry = static_cast<PLDHashEntryStub*>(aEntry);
  entry->key = aKey;
}

static const PLDHashTableOps trivialOps = {
    TrivialHash, PLDHashTable::MatchEntryStub, PLDHashTable::MoveEntryStub,
    PLDHashTable::ClearEntryStub, TrivialInitEntry};

TEST(PLDHashTableTest, MoveSemantics)
{
  PLDHashTable t1(&trivialOps, sizeof(PLDHashEntryStub));
  t1.Add((const void*)88);
  PLDHashTable t2(&trivialOps, sizeof(PLDHashEntryStub));
  t2.Add((const void*)99);

#if defined(__clang__)
#  pragma clang diagnostic push
#  pragma clang diagnostic ignored "-Wself-move"
#endif
  t1 = std::move(t1);  // self-move
#if defined(__clang__)
#  pragma clang diagnostic pop
#endif

  t1 = std::move(t2);  // empty overwritten with empty

  PLDHashTable t3(&trivialOps, sizeof(PLDHashEntryStub));
  PLDHashTable t4(&trivialOps, sizeof(PLDHashEntryStub));
  t3.Add((const void*)88);

  t3 = std::move(t4);  // non-empty overwritten with empty

  PLDHashTable t5(&trivialOps, sizeof(PLDHashEntryStub));
  PLDHashTable t6(&trivialOps, sizeof(PLDHashEntryStub));
  t6.Add((const void*)88);

  t5 = std::move(t6);  // empty overwritten with non-empty

  PLDHashTable t7(&trivialOps, sizeof(PLDHashEntryStub));
  PLDHashTable t8(std::move(t7));  // new table constructed with uninited

  PLDHashTable t9(&trivialOps, sizeof(PLDHashEntryStub));
  t9.Add((const void*)88);
  PLDHashTable t10(std::move(t9));  // new table constructed with inited
}

TEST(PLDHashTableTest, Clear)
{
  PLDHashTable t1(&trivialOps, sizeof(PLDHashEntryStub));

  t1.Clear();
  ASSERT_EQ(t1.EntryCount(), 0u);

  t1.ClearAndPrepareForLength(100);
  ASSERT_EQ(t1.EntryCount(), 0u);

  t1.Add((const void*)77);
  t1.Add((const void*)88);
  t1.Add((const void*)99);
  ASSERT_EQ(t1.EntryCount(), 3u);

  t1.Clear();
  ASSERT_EQ(t1.EntryCount(), 0u);

  t1.Add((const void*)55);
  t1.Add((const void*)66);
  t1.Add((const void*)77);
  t1.Add((const void*)88);
  t1.Add((const void*)99);
  ASSERT_EQ(t1.EntryCount(), 5u);

  t1.ClearAndPrepareForLength(8192);
  ASSERT_EQ(t1.EntryCount(), 0u);
}

TEST(PLDHashTableTest, Iterator)
{
  PLDHashTable t(&trivialOps, sizeof(PLDHashEntryStub));

  // Explicitly test the move constructor. We do this because, due to copy
  // elision, compilers might optimize away move constructor calls for normal
  // iterator use.
  {
    PLDHashTable::Iterator iter1(&t);
    PLDHashTable::Iterator iter2(std::move(iter1));
  }

  // Iterate through the empty table.
  for (PLDHashTable::Iterator iter(&t); !iter.Done(); iter.Next()) {
    (void)iter.Get();
    ASSERT_TRUE(false);  // shouldn't hit this
  }

  // Add three entries.
  t.Add((const void*)77);
  t.Add((const void*)88);
  t.Add((const void*)99);

  // Check the iterator goes through each entry once.
  bool saw77 = false, saw88 = false, saw99 = false;
  int n = 0;
  for (auto iter(t.Iter()); !iter.Done(); iter.Next()) {
    auto entry = static_cast<PLDHashEntryStub*>(iter.Get());
    if (entry->key == (const void*)77) {
      saw77 = true;
    }
    if (entry->key == (const void*)88) {
      saw88 = true;
    }
    if (entry->key == (const void*)99) {
      saw99 = true;
    }
    n++;
  }
  ASSERT_TRUE(saw77 && saw88 && saw99 && n == 3);

  t.Clear();

  // First, we insert 64 items, which results in a capacity of 128, and a load
  // factor of 50%.
  for (intptr_t i = 0; i < 64; i++) {
    t.Add((const void*)i);
  }
  ASSERT_EQ(t.EntryCount(), 64u);
  ASSERT_EQ(t.Capacity(), 128u);

  // The first removing iterator does no removing; capacity and entry count are
  // unchanged.
  for (PLDHashTable::Iterator iter(&t); !iter.Done(); iter.Next()) {
    (void)iter.Get();
  }
  ASSERT_EQ(t.EntryCount(), 64u);
  ASSERT_EQ(t.Capacity(), 128u);

  // The second removing iterator removes 16 items. This reduces the load
  // factor to 37.5% (48 / 128), which isn't low enough to shrink the table.
  for (auto iter = t.Iter(); !iter.Done(); iter.Next()) {
    auto entry = static_cast<PLDHashEntryStub*>(iter.Get());
    if ((intptr_t)(entry->key) % 4 == 0) {
      iter.Remove();
    }
  }
  ASSERT_EQ(t.EntryCount(), 48u);
  ASSERT_EQ(t.Capacity(), 128u);

  // The third removing iterator removes another 16 items. This reduces
  // the load factor to 25% (32 / 128), so the table is shrunk.
  for (auto iter = t.Iter(); !iter.Done(); iter.Next()) {
    auto entry = static_cast<PLDHashEntryStub*>(iter.Get());
    if ((intptr_t)(entry->key) % 2 == 0) {
      iter.Remove();
    }
  }
  ASSERT_EQ(t.EntryCount(), 32u);
  ASSERT_EQ(t.Capacity(), 64u);

  // The fourth removing iterator removes all remaining items. This reduces
  // the capacity to the minimum.
  for (auto iter = t.Iter(); !iter.Done(); iter.Next()) {
    iter.Remove();
  }
  ASSERT_EQ(t.EntryCount(), 0u);
  ASSERT_EQ(t.Capacity(), unsigned(PLDHashTable::kMinCapacity));
}

TEST(PLDHashTableTest, WithEntryHandle)
{
  PLDHashTable t(&trivialOps, sizeof(PLDHashEntryStub));

  PLDHashEntryHdr* entry1 =
      t.WithEntryHandle((const void*)88, [](auto entryHandle) {
        EXPECT_FALSE(entryHandle);

        bool initEntryCalled = false;
        PLDHashEntryHdr* entry =
            entryHandle.OrInsert([&initEntryCalled](PLDHashEntryHdr* entry) {
              EXPECT_TRUE(entry);
              TrivialInitEntry(entry, (const void*)88);
              initEntryCalled = true;
            });
        EXPECT_TRUE(initEntryCalled);
        EXPECT_EQ(entryHandle.Entry(), entry);

        return entry;
      });
  ASSERT_TRUE(entry1);
  ASSERT_EQ(t.EntryCount(), 1u);

  PLDHashEntryHdr* entry2 =
      t.WithEntryHandle((const void*)88, [](auto entryHandle) {
        EXPECT_TRUE(entryHandle);

        bool initEntryCalled = false;
        PLDHashEntryHdr* entry =
            entryHandle.OrInsert([&initEntryCalled](PLDHashEntryHdr* entry) {
              EXPECT_TRUE(entry);
              TrivialInitEntry(entry, (const void*)88);
              initEntryCalled = true;
            });
        EXPECT_FALSE(initEntryCalled);
        EXPECT_EQ(entryHandle.Entry(), entry);

        return entry;
      });
  ASSERT_TRUE(entry2);
  ASSERT_EQ(t.EntryCount(), 1u);

  ASSERT_EQ(entry1, entry2);
}

// This test involves resizing a table repeatedly up to 512 MiB in size. On
// 32-bit platforms (Win32, Android) it sometimes OOMs, causing the test to
// fail. (See bug 931062 and bug 1267227.) Therefore, we only run it on 64-bit
// platforms where OOM is much less likely.
//
// Also, it's slow, and so should always be last.
#ifdef HAVE_64BIT_BUILD
TEST(PLDHashTableTest, GrowToMaxCapacity)
{
  // This is infallible.
  PLDHashTable* t =
      new PLDHashTable(&trivialOps, sizeof(PLDHashEntryStub), 128);

  // Keep inserting elements until failure occurs because the table is full.
  size_t numInserted = 0;
  while (true) {
    if (!t->Add((const void*)numInserted, mozilla::fallible)) {
      break;
    }
    numInserted++;
  }

  // We stop when the element count is 96.875% of PLDHashTable::kMaxCapacity
  // (see MaxLoadOnGrowthFailure()).
  if (numInserted !=
      PLDHashTable::kMaxCapacity - (PLDHashTable::kMaxCapacity >> 5)) {
    delete t;
    ASSERT_TRUE(false);
  }

  delete t;
}
#endif

quality90%

¤ Dauer der Verarbeitung: 0.31 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.