Quelle ThrottledEventQueue.cpp Sprache: C

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "ThrottledEventQueue.h"

#include "mozilla/Atomics.h"
#include "mozilla/ClearOnShutdown.h"
#include "mozilla/CondVar.h"
#include "mozilla/EventQueue.h"
#include "mozilla/Mutex.h"
#include "mozilla/Unused.h"
#include "nsThreadUtils.h"

namespace mozilla {

namespace {}  // anonymous namespace

// The ThrottledEventQueue is designed with inner and outer objects:
//
//       XPCOM code     base event target
//            |               |
//            v               v
//        +-------+       +--------+
//        | Outer |   +-->|executor|
//        +-------+   |   +--------+
//            |       |       |
//            |   +-------+   |
//            +-->| Inner |<--+
//                +-------+
//
// Client code references the outer nsIEventTarget which in turn references
// an inner object, which actually holds the queue of runnables.
//
// Whenever the queue is non-empty (and not paused), it keeps an "executor"
// runnable dispatched to the base event target. Each time the executor is run,
// it draws the next event from Inner's queue and runs it. If that queue has
// more events, the executor is dispatched to the base again.
//
// The executor holds a strong reference to the Inner object. This means that if
// the outer object is dereferenced and destroyed, the Inner object will remain
// live for as long as the executor exists - that is, until the Inner's queue is
// empty.
//
// A Paused ThrottledEventQueue does not enqueue an executor when new events are
// added. Any executor previously queued on the base event target draws no
// events from a Paused ThrottledEventQueue, and returns without re-enqueueing
// itself. Since there is no executor keeping the Inner object alive until its
// queue is empty, dropping a Paused ThrottledEventQueue may drop the Inner
// while it still owns events. This is the correct behavior: if there are no
// references to it, it will never be Resumed, and thus it will never dispatch
// events again.
//
// Resuming a ThrottledEventQueue must dispatch an executor, so calls to Resume
// are fallible for the same reasons as calls to Dispatch.
//
// The xpcom shutdown process drains the main thread's event queue several
// times, so if a ThrottledEventQueue is being driven by the main thread, it
// should get emptied out by the time we reach the "eventq shutdown" phase.
class ThrottledEventQueue::Inner final : public nsISupports {
  // The runnable which is dispatched to the underlying base target.  Since
  // we only execute one event at a time we just re-use a single instance
  // of this class while there are events left in the queue.
  class Executor final : public Runnable, public nsIRunnablePriority {
    // The Inner whose runnables we execute. mInner->mExecutor points
    // to this executor, forming a reference loop.
    RefPtr<Inner> mInner;

    ~Executor() = default;

   public:
    explicit Executor(Inner* aInner)
        : Runnable("ThrottledEventQueue::Inner::Executor"), mInner(aInner) {}

    NS_DECL_ISUPPORTS_INHERITED

    NS_IMETHODIMP
    Run() override {
      mInner->ExecuteRunnable();
      return NS_OK;
    }

    NS_IMETHODIMP
    GetPriority(uint32_t* aPriority) override {
      *aPriority = mInner->mPriority;
      return NS_OK;
    }

#ifdef MOZ_COLLECTING_RUNNABLE_TELEMETRY
    NS_IMETHODIMP
    GetName(nsACString& aName) override { return mInner->CurrentName(aName); }
#endif
  };

  mutable Mutex mMutex;
  mutable CondVar mIdleCondVar MOZ_GUARDED_BY(mMutex);

  // As-of-yet unexecuted runnables queued on this ThrottledEventQueue.
  //
  // Used from any thread; protected by mMutex. Signals mIdleCondVar when
  // emptied.
  EventQueueSized<64> mEventQueue MOZ_GUARDED_BY(mMutex);

  // The event target we dispatch our events (actually, just our Executor) to.
  //
  // Written only during construction. Readable by any thread without locking.
  const nsCOMPtr<nsISerialEventTarget> mBaseTarget;

  // The Executor that we dispatch to mBaseTarget to draw runnables from our
  // queue. mExecutor->mInner points to this Inner, forming a reference loop.
  //
  // Used from any thread; protected by mMutex.
  nsCOMPtr<nsIRunnable> mExecutor MOZ_GUARDED_BY(mMutex);

  const char* const mName;

  const uint32_t mPriority;

  // True if this queue is currently paused.
  // Used from any thread; protected by mMutex.
  bool mIsPaused MOZ_GUARDED_BY(mMutex);

  explicit Inner(nsISerialEventTarget* aBaseTarget, const char* aName,
                 uint32_t aPriority)
      : mMutex("ThrottledEventQueue"),
        mIdleCondVar(mMutex, "ThrottledEventQueue:Idle"),
        mBaseTarget(aBaseTarget),
        mName(aName),
        mPriority(aPriority),
        mIsPaused(false) {
    MOZ_ASSERT(mName, "Must pass a valid name!");
  }

  ~Inner() {
#ifdef DEBUG
    MutexAutoLock lock(mMutex);

    // As long as an executor exists, it had better keep us alive, since it's
    // going to call ExecuteRunnable on us.
    MOZ_ASSERT(!mExecutor);

    // If we have any events in our queue, there should be an executor queued
    // for them, and that should have kept us alive. The exception is that, if
    // we're paused, we don't enqueue an executor.
    MOZ_ASSERT(mEventQueue.IsEmpty(lock) || IsPaused(lock));

    // If we are cleaning up prematurely (i.e. with still some pending
    // runnables) must be doing so from the target thread.
    MOZ_ASSERT_IF(!mEventQueue.IsEmpty(lock), IsOnCurrentThread());
#endif
  }

  // Make sure an executor has been queued on our base target. If we already
  // have one, do nothing; otherwise, create and dispatch it.
  nsresult EnsureExecutor(MutexAutoLock& lock) MOZ_REQUIRES(mMutex) {
    if (mExecutor) return NS_OK;

    // Note, this creates a ref cycle keeping the inner alive
    // until the queue is drained.
    mExecutor = new Executor(this);
    nsresult rv = mBaseTarget->Dispatch(mExecutor, NS_DISPATCH_NORMAL);
    if (NS_WARN_IF(NS_FAILED(rv))) {
      mExecutor = nullptr;
      return rv;
    }

    return NS_OK;
  }

  nsresult CurrentName(nsACString& aName) {
    nsCOMPtr<nsIRunnable> event;

#ifdef DEBUG
    bool currentThread = false;
    mBaseTarget->IsOnCurrentThread(¤tThread);
    MOZ_ASSERT(currentThread);
#endif

    {
      MutexAutoLock lock(mMutex);
      event = mEventQueue.PeekEvent(lock);
      // It is possible that mEventQueue wasn't empty when the executor
      // was added to the queue, but someone processed events from mEventQueue
      // before the executor, this is why mEventQueue is empty here
      if (!event) {
        aName.AssignLiteral("no runnables left in the ThrottledEventQueue");
        return NS_OK;
      }
    }

    if (nsCOMPtr<nsINamed> named = do_QueryInterface(event)) {
      nsresult rv = named->GetName(aName);
      return rv;
    }

    aName.AssignASCII(mName);
    return NS_OK;
  }

  void ExecuteRunnable() {
    // Any thread
    nsCOMPtr<nsIRunnable> event;

#ifdef DEBUG
    bool currentThread = false;
    mBaseTarget->IsOnCurrentThread(¤tThread);
    MOZ_ASSERT(currentThread);
#endif

    {
      MutexAutoLock lock(mMutex);

      // Normally, a paused queue doesn't dispatch any executor, but we might
      // have been paused after the executor was already in flight. There's no
      // way to yank the executor out of the base event target, so we just check
      // for a paused queue here and return without running anything. We'll
      // create a new executor when we're resumed.
      if (IsPaused(lock)) {
        // Note, this breaks a ref cycle.
        mExecutor = nullptr;
        return;
      }

      // We only dispatch an executor runnable when we know there is something
      // in the queue, so this should never fail.
      event = mEventQueue.GetEvent(lock);
      MOZ_ASSERT(event);

      // If there are more events in the queue, then dispatch the next
      // executor.  We do this now, before running the event, because
      // the event might spin the event loop and we don't want to stall
      // the queue.
      if (mEventQueue.HasReadyEvent(lock)) {
        // Dispatch the next base target runnable to attempt to execute
        // the next throttled event.  We must do this before executing
        // the event in case the event spins the event loop.
        MOZ_ALWAYS_SUCCEEDS(
            mBaseTarget->Dispatch(mExecutor, NS_DISPATCH_NORMAL));
      }

      // Otherwise the queue is empty and we can stop dispatching the
      // executor.
      else {
        // Break the Executor::mInner / Inner::mExecutor reference loop.
        mExecutor = nullptr;
        mIdleCondVar.NotifyAll();
      }
    }

    // Execute the event now that we have unlocked.
    LogRunnable::Run log(event);
    Unused << event->Run();

    // To cover the event's destructor code in the LogRunnable log
    event = nullptr;
  }

public:
  static already_AddRefed<Inner> Create(nsISerialEventTarget* aBaseTarget,
                                        const char* aName, uint32_t aPriority) {
    // FIXME: This assertion only worked when `sCurrentShutdownPhase` was not
    // being updated.
    // MOZ_ASSERT(ClearOnShutdown_Internal::sCurrentShutdownPhase ==
    //            ShutdownPhase::NotInShutdown);

    RefPtr<Inner> ref = new Inner(aBaseTarget, aName, aPriority);
    return ref.forget();
  }

  bool IsEmpty() const {
    // Any thread
    return Length() == 0;
  }

  uint32_t Length() const {
    // Any thread
    MutexAutoLock lock(mMutex);
    return mEventQueue.Count(lock);
  }

  already_AddRefed<nsIRunnable> GetEvent() {
    MutexAutoLock lock(mMutex);
    return mEventQueue.GetEvent(lock);
  }

  void AwaitIdle() const {
    // Any thread, except the main thread or our base target.  Blocking the
    // main thread is forbidden.  Blocking the base target is guaranteed to
    // produce a deadlock.
    MOZ_ASSERT(!NS_IsMainThread());
#ifdef DEBUG
    bool onBaseTarget = false;
    Unused << mBaseTarget->IsOnCurrentThread(&onBaseTarget);
    MOZ_ASSERT(!onBaseTarget);
#endif

    MutexAutoLock lock(mMutex);
    while (mExecutor || IsPaused(lock)) {
      mIdleCondVar.Wait();
    }
  }

  bool IsPaused() const {
    MutexAutoLock lock(mMutex);
    return IsPaused(lock);
  }

  bool IsPaused(const MutexAutoLock& aProofOfLock) const MOZ_REQUIRES(mMutex) {
    return mIsPaused;
  }

  nsresult SetIsPaused(bool aIsPaused) {
    MutexAutoLock lock(mMutex);

    // If we will be unpaused, and we have events in our queue, make sure we
    // have an executor queued on the base event target to run them. Do this
    // before we actually change mIsPaused, since this is fallible.
    if (!aIsPaused && !mEventQueue.IsEmpty(lock)) {
      nsresult rv = EnsureExecutor(lock);
      if (NS_FAILED(rv)) {
        return rv;
      }
    }

    mIsPaused = aIsPaused;
    return NS_OK;
  }

  nsresult DispatchFromScript(nsIRunnable* aEvent, uint32_t aFlags) {
    // Any thread
    nsCOMPtr<nsIRunnable> r = aEvent;
    return Dispatch(r.forget(), aFlags);
  }

  nsresult Dispatch(already_AddRefed<nsIRunnable> aEvent, uint32_t aFlags) {
    MOZ_ASSERT(aFlags == NS_DISPATCH_NORMAL || aFlags == NS_DISPATCH_AT_END);

    // Any thread
    MutexAutoLock lock(mMutex);

    if (!IsPaused(lock)) {
      // Make sure we have an executor in flight to process events. This is
      // fallible, so do it first. Our lock will prevent the executor from
      // accessing the event queue before we add the event below.
      nsresult rv = EnsureExecutor(lock);
      if (NS_FAILED(rv)) return rv;
    }

    // Only add the event to the underlying queue if are able to
    // dispatch to our base target.
    nsCOMPtr<nsIRunnable> event(aEvent);
    LogRunnable::LogDispatch(event);
    mEventQueue.PutEvent(event.forget(), EventQueuePriority::Normal, lock);
    return NS_OK;
  }

  nsresult DelayedDispatch(already_AddRefed<nsIRunnable> aEvent,
                           uint32_t aDelay) {
    // The base target may implement this, but we don't.  Always fail
    // to provide consistent behavior.
    return NS_ERROR_NOT_IMPLEMENTED;
  }

  nsresult RegisterShutdownTask(nsITargetShutdownTask* aTask) {
    return mBaseTarget->RegisterShutdownTask(aTask);
  }

  nsresult UnregisterShutdownTask(nsITargetShutdownTask* aTask) {
    return mBaseTarget->UnregisterShutdownTask(aTask);
  }

  bool IsOnCurrentThread() { return mBaseTarget->IsOnCurrentThread(); }

  NS_DECL_THREADSAFE_ISUPPORTS
};

NS_IMPL_ISUPPORTS(ThrottledEventQueue::Inner, nsISupports);

NS_IMPL_ISUPPORTS_INHERITED(ThrottledEventQueue::Inner::Executor, Runnable,
                            nsIRunnablePriority)

NS_IMPL_ISUPPORTS(ThrottledEventQueue, ThrottledEventQueue, nsIEventTarget,
                  nsISerialEventTarget);

ThrottledEventQueue::ThrottledEventQueue(already_AddRefed<Inner> aInner)
    : mInner(aInner) {
  MOZ_ASSERT(mInner);
}

already_AddRefed<ThrottledEventQueue> ThrottledEventQueue::Create(
    nsISerialEventTarget* aBaseTarget, const char* aName, uint32_t aPriority) {
  MOZ_ASSERT(aBaseTarget);

  RefPtr<Inner> inner = Inner::Create(aBaseTarget, aName, aPriority);

  RefPtr<ThrottledEventQueue> ref = new ThrottledEventQueue(inner.forget());
  return ref.forget();
}

bool ThrottledEventQueue::IsEmpty() const { return mInner->IsEmpty(); }

uint32_t ThrottledEventQueue::Length() const { return mInner->Length(); }

// Get the next runnable from the queue
already_AddRefed<nsIRunnable> ThrottledEventQueue::GetEvent() {
  return mInner->GetEvent();
}

void ThrottledEventQueue::AwaitIdle() const { return mInner->AwaitIdle(); }

nsresult ThrottledEventQueue::SetIsPaused(bool aIsPaused) {
  return mInner->SetIsPaused(aIsPaused);
}

bool ThrottledEventQueue::IsPaused() const { return mInner->IsPaused(); }

NS_IMETHODIMP
ThrottledEventQueue::DispatchFromScript(nsIRunnable* aEvent, uint32_t aFlags) {
  return mInner->DispatchFromScript(aEvent, aFlags);
}

NS_IMETHODIMP
ThrottledEventQueue::Dispatch(already_AddRefed<nsIRunnable> aEvent,
                              uint32_t aFlags) {
  return mInner->Dispatch(std::move(aEvent), aFlags);
}

NS_IMETHODIMP
ThrottledEventQueue::DelayedDispatch(already_AddRefed<nsIRunnable> aEvent,
                                     uint32_t aFlags) {
  return mInner->DelayedDispatch(std::move(aEvent), aFlags);
}

NS_IMETHODIMP
ThrottledEventQueue::RegisterShutdownTask(nsITargetShutdownTask* aTask) {
  return mInner->RegisterShutdownTask(aTask);
}

NS_IMETHODIMP
ThrottledEventQueue::UnregisterShutdownTask(nsITargetShutdownTask* aTask) {
  return mInner->UnregisterShutdownTask(aTask);
}

NS_IMETHODIMP
ThrottledEventQueue::IsOnCurrentThread(bool* aResult) {
  *aResult = mInner->IsOnCurrentThread();
  return NS_OK;
}

NS_IMETHODIMP_(bool)
ThrottledEventQueue::IsOnCurrentThreadInfallible() {
  return mInner->IsOnCurrentThread();
}

}  // namespace mozilla

quality99%

¤ Dauer der Verarbeitung: 0.2 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung ist noch experimentell.