/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at
http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at
http://www.apache.org/licenses/LICENSE-2.0 .
*/
module com { module sun { module star { module io {
published interface XInputStream;
};};};};
module com { module sun { module star { module sdbc {
published interface XRef;
published interface XArray;
published interface XBlob;
published interface XClob;
/** is used for parameter setting, commonly implemented in conjunction with
PreparedStatements.
<p>
<b>Note:</b> The setXXX methods for setting IN parameter values
must specify types that are compatible with the defined SQL type of
the input parameter. For instance, if the IN parameter has SQL type
Integer, then the method
com::sun::star::sdbc::XParameters::setInt()
should be used.
</p>
<p>
If arbitrary parameter type conversions are required, the method
com::sun::star::sdbc::XParameters::setObject()
should be used with a target SQL type.
<br/>
<br/>
Example of setting a parameter;
<code>con</code>
is an active connection.
</p>
@code{.bas}
pstmt = con.prepareStatement("UPDATE EMPLOYEES SET SALARY = ? WHERE ID = ?")
pstmt.setDouble(1, 153833.00)
pstmt.setLong(2, 110592)
@endcode
@see com::sun::star::sdbc::XPreparedStatement
*/
published interface XParameters: com::sun::star::uno::XInterface
{
/** sets the designated parameter to SQL NULL.
*/
void setNull([in]long parameterIndex,
[in]long sqlType) raises (SQLException);
/** sets the designated parameter to SQL NULL. This version of setNull should
be used for user-named types and REF type parameters. Examples
of user-named types include: STRUCT, DISTINCT, OBJECT, and
named array types.
<p>
<b>Note:</b> To be portable, applications must give the
SQL type code and the fully-qualified SQL type name when specifying
a NULL user-defined or REF parameter. In the case of a user-named type
the name is the type name of the parameter itself. For a REF
parameter the name is the type name of the referenced type. If
a SDBC driver does not need the type code or type name information,
it may ignore it.
<br/>
Although it is intended for user-named and Ref parameters,
this method may be used to set a null parameter of any JDBC type.
If the parameter does not have a user-named or REF type, the given
typeName is ignored.
</p>
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param sqlType
the type of the column to set to `NULL`
@param typeName
the name of the type
@throws SQLException
if a database access error occurs.
*/
void setObjectNull([in]long parameterIndex,
[in]long sqlType,
[in]string typeName) raises (SQLException);
/** sets the designated parameter to a boolean value. The driver converts this
to a SQL BIT value when it sends it to the database.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setBoolean([in]long parameterIndex, [in]boolean x)
raises (SQLException);
/** sets the designated parameter to a byte value. The driver converts this
to a SQL TINYINT value when it sends it to the database.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setByte([in]long parameterIndex, [in]byte x) raises (SQLException);
/** sets the designated parameter to a short value. The driver converts this
to a SQL SMALLINT value when it sends it to the database.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setShort([in]long parameterIndex, [in]short x) raises (SQLException);
/** sets the designated parameter to a long value. The driver converts this
to a SQL INTEGER value when it sends it to the database.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setInt([in]long parameterIndex, [in]long x) raises (SQLException);
/** sets the designated parameter to a hyper value. The driver converts this
to a SQL BIGINT value when it sends it to the database.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setLong([in]long parameterIndex, [in]hyper x) raises (SQLException);
/** sets the designated parameter to a float value. The driver converts this
to a SQL FLOAT value when it sends it to the database.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setFloat([in]long parameterIndex, [in]float x) raises (SQLException);
/** sets the designated parameter to a double value. The driver converts this
to a SQL DOUBLE value when it sends it to the database.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setDouble([in]long parameterIndex, [in]double x) raises (SQLException);
/** sets the designated parameter to a string value. The driver converts this
to a SQL VARCHAR or LONGVARCHAR value (depending on the argument's
size relative to the driver's limits on VARCHARs) when it sends
it to the database.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setString([in]long parameterIndex, [in]string x) raises (SQLException);
/** sets the designated parameter to a sequence of bytes. The driver converts
this to a SQL VARBINARY or LONGVARBINARY (depending on the
argument's size relative to the driver's limits on VARBINARYs)
when it sends it to the database.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setBytes([in]long parameterIndex, [in]sequence<byte> x)
raises (SQLException);
/** sets the designated parameter to a date value. The driver converts this
to a SQL DATE value when it sends it to the database.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setDate([in]long parameterIndex, [in]com::sun::star::util::Date x)
raises (SQLException);
/** sets the designated parameter to a time value. The driver converts this
to a SQL TIME value when it sends it to the database.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setTime([in]long parameterIndex, [in]com::sun::star::util::Time x)
raises (SQLException);
/** sets the designated parameter to a datetime value. The driver
converts this to a SQL TIMESTAMP value when it sends it to the
database.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setTimestamp([in]long parameterIndex,
[in]com::sun::star::util::DateTime x) raises (SQLException);
/** sets the designated parameter to the given input stream, which will have
the specified number of bytes.
When a very large binary value is input to a LONGVARBINARY or LONGVARCHAR
parameter, it may be more practical to send it via an
com::sun::star::io::XInputStream
. SDBC will read the data from the stream as needed, until it reaches end-of-file.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@param length
the number of bytes in the stream
@throws SQLException
if a database access error occurs.
*/
void setBinaryStream([in]long parameterIndex,
[in]com::sun::star::io::XInputStream x,
[in]long length) raises (SQLException);
/** sets the designated parameter to the given input stream, which will have
the specified number of bytes.
When a very large binary value is input to a LONGVARCHAR
parameter, it may be more practical to send it via a
com::sun::star::io::XInputStream
. SDBC will read the data from the stream as needed, until it reaches end-of-file.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@param length
the number of characters in the stream
@throws SQLException
if a database access error occurs.
*/
void setCharacterStream([in]long parameterIndex,
[in]com::sun::star::io::XInputStream x,
[in]long length) raises (SQLException);
/** sets the value of a parameter using an any.
<p>The given object will be converted to the targetSqlType
before being sent to the database.
If the object has a custom mapping (is of a class implementing SQLData),
the SDBC driver should call its method <code>writeSQL</code> to write it
to the SQL data stream.
If, on the other hand, the object is of a service implementing Ref, Blob,
Clob, Struct, or Array, the driver should pass it to the database as a
value of the corresponding SQL type.
</p>
<p>Note that this method may be used to pass database-specific
abstract data types.
</p>
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setObject([in]long parameterIndex, [in]any x)
raises (SQLException);
/** set a value from the Datatype ANY for a parameter.
<p>The given object will be converted to the targetSqlType
before being sent to the database.
If the object has a custom mapping (is of a class implementing SQLData),
the SDBC driver should call its method <code>writeSQL</code> to write it
to the SQL data stream.
If, on the other hand, the object is of a service implementing Ref, Blob,
Clob, Struct, or Array, the driver should pass it to the database as a
value of the corresponding SQL type.
</p>
<p>Note that this method may be used to pass database-specific
abstract data types.
</p>
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@param targetSqlType
the SQL type (as defined in
com::sun::star::sdbc::DataType
) to be sent to the database. The scale argument may further qualify this type.
@param scale
for
com::sun::star::sdbc::DataType::DECIMAL
or
com::sun::star::sdbc::DataType::NUMERIC
types, this is the number of digits after the decimal point. For all other types, this value will
be ignored.
@throws SQLException
if a database access error occurs.
*/
void setObjectWithInfo([in]long parameterIndex,
[in]any x, [in]long targetSqlType, [in]long scale)
raises (SQLException);
/** sets a REF(<structured-type>) parameter.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setRef ([in]long parameterIndex, [in]XRef x) raises (SQLException);
/** sets a BLOB parameter.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setBlob ([in]long parameterIndex, [in]XBlob x) raises (SQLException);
/** sets a CLOB parameter.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setClob ([in]long parameterIndex, [in]XClob x) raises (SQLException);
/** sets an Array parameter.
@param parameterIndex
the first parameter is 1, the second is 2, ...
@param x
the parameter value
@throws SQLException
if a database access error occurs.
*/
void setArray ([in]long parameterIndex, [in]XArray x) raises (SQLException);
/** clears the current parameter values immediately.
<p>In general, parameter values remain in force for repeated use of a
Statement. Setting a parameter value automatically clears its
previous value. However, in some cases it is useful to immediately
release the resources used by the current parameter values; this can
be done by calling clearParameters.
</p>
@throws SQLException
if a database access error occurs.
*/
void clearParameters() raises (SQLException);
};
}; }; }; };
/*===========================================================================
===========================================================================*/
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
