/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/.
*/
namespace
{ /// Covers ooox/source/export/ fixes. class Test : public UnoApiXmlTest
{ public:
Test()
: UnoApiXmlTest(u"/oox/qa/unit/data/"_ustr)
{
}
};
CPPUNIT_TEST_FIXTURE(Test, testPolylineConnectorPosition)
{ // Given a document with a group shape and therein a polyline and a connector.
loadFromFile(u"tdf141786_PolylineConnectorInGroup.odt"); // When saving that to DOCX:
save(u"Office Open XML Text"_ustr);
// Then make sure polyline and connector have the correct position.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
// For child elements of groups in Writer the position has to be adapted to be relative // to group instead of being relative to anchor. That was missing for polyline and // connector. // Polyline: Without fix it would have failed with expected: 0, actual: 1800360
assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[1]/wps:spPr/a:xfrm/a:off", "x", u"0"); // ... failed with expected: 509400, actual: 1229400
assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[1]/wps:spPr/a:xfrm/a:off", "y", u"509400");
// Connector: Without fix it would have failed with expected: 763200, actual: 2563560
assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[3]/wps:spPr/a:xfrm/a:off", "x", u"763200"); // ... failed with expected: 0, actual: 720000
assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[3]/wps:spPr/a:xfrm/a:off", "y", u"0"); // Polyline and connector were shifted 1800360EMU right, 720000EMU down.
}
CPPUNIT_TEST_FIXTURE(Test, testRotatedShapePosition)
{ // Given a document with a group shape and therein a rotated custom shape.
loadFromFile(u"tdf141786_RotatedShapeInGroup.odt");
// FIXME: validation error in OOXML export: Errors: 3
skipValidation();
// When saving that to DOCX:
save(u"Office Open XML Text"_ustr);
// Then make sure the rotated child shape has the correct position.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
// For a group itself and for shapes outside of groups, the position calculation is done in // DocxSdrExport. For child elements of groups it has to be done in // DrawingML::WriteShapeTransformation(), but was missing. // Without fix it would have failed with expected: 469440, actual: 92160 // The shape was about 1cm shifted up and partly outside its group.
assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[1]/wps:spPr/a:xfrm/a:off", "y", u"469440");
}
// Without TrackChanges, inserting the Checkbox works just fine // when exporting to docx.
dispatchCommand(mxComponent, u".uno:InsertCheckboxContentControl"_ustr, {});
save(u"Office Open XML Text"_ustr); // validate(maTempFile.GetFileName(), test::OOXML); // Enable when unrelated errors are fixed.
}
// With TrackChanges, the Checkbox causes an assertion in the sax serializer, // in void sax_fastparser::FastSaxSerializer::endFastElement(sal_Int32). // Element == maMarkStack.top()->m_DebugStartedElements.back() // sax/source/tools/fastserializer.cxx#402
dispatchCommand(mxComponent, u".uno:TrackChanges"_ustr, {});
// Loading should not show the "corrupted" dialog, which would assert.
saveAndReload(u"Office Open XML Text"_ustr);
// Now that we loaded it successfully, delete the controls, // still with change-tracking enabled, and save.
dispatchCommand(mxComponent, u".uno:SelectAll"_ustr, {});
dispatchCommand(mxComponent, u".uno:Delete"_ustr, {});
// Loading should not show the "corrupted" dialog, which would assert.
saveAndReload(u"Office Open XML Text"_ustr); // validate(maTempFile.GetFileName(), test::OOXML); // Enable when unrelated errors are fixed.
}
}
CPPUNIT_TEST_FIXTURE(Test, testDmlGroupshapePolygon)
{ // Given a document with a group shape, containing a single polygon child shape:
loadFromFile(u"dml-groupshape-polygon.docx");
// FIXME: validation error in OOXML export: Errors: 9
skipValidation();
// When saving that to DOCX:
save(u"Office Open XML Text"_ustr);
// Then make sure that the group shape, the group shape's child size and the child shape's size // match:
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
assertXPath(pXmlDoc, "//wpg:grpSpPr/a:xfrm/a:ext", "cx", u"5328360"); // Without the accompanying fix in place, this test would have failed, the <a:chExt> element was // not written.
assertXPath(pXmlDoc, "//wpg:grpSpPr/a:xfrm/a:chExt", "cx", u"5328360");
assertXPath(pXmlDoc, "//wps:spPr/a:xfrm/a:ext", "cx", u"5328360");
}
CPPUNIT_TEST_FIXTURE(Test, testCustomShapeArrowExport)
{ // Given a document with a few different kinds of arrow shapes in it:
loadFromFile(u"tdf142602_CustomShapeArrows.odt");
// FIXME: validation error in OOXML export: Errors: 11
skipValidation();
// When saving that to DOCX:
save(u"Office Open XML Text"_ustr);
// Then the shapes should retain their correct control values.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
// Without the fix the output OOXML would have no <a:prstGeom> tags in it.
CPPUNIT_TEST_FIXTURE(Test, testCameraRevolutionGrabBag)
{ // Given a PPTX file that contains camera revolution (rotation around z axis) applied shapes
loadFromFile(u"camera-rotation-revolution-nonwps.pptx");
// When saving that document:
save(u"Impress Office Open XML"_ustr);
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // Then make sure the revolution is exported without a problem: // First shape textbox:
assertXPath(pXmlDoc, "//p:sp[1]/p:spPr/a:scene3d/a:camera/a:rot", "rev", u"5400000");
// Second shape rectangle:
assertXPath(pXmlDoc, "//p:sp[2]/p:spPr/a:scene3d/a:camera/a:rot", "rev", u"18300000");
// Make sure Shape3DProperties don't leak under txBody // Without the accompanying fix in place, this test would have failed with: // - Expected: 0 // - Actual : 1 // - In <>, XPath '//p:sp[1]/p:txBody/a:bodyPr/a:scene3d/a:camera/a:rot' number of nodes is incorrect
assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:bodyPr/a:scene3d/a:camera/a:rot", 0);
assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:bodyPr/a:scene3d/a:camera/a:rot", 0);
}
CPPUNIT_TEST_FIXTURE(Test, testReferToTheme)
{ // Given a PPTX file that contains references to a theme:
loadFromFile(u"refer-to-theme.pptx");
// When saving that document:
save(u"Impress Office Open XML"_ustr);
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // Then make sure the shape text color is a scheme color: // Without the accompanying fix in place, this test would have failed with: // - Expected: 1 // - Actual : 0 // - XPath '//p:sp/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr' number of nodes is incorrect // i.e. the <a:schemeClr> element was not written.
assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr", "val",
u"accent1");
assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumMod", 0);
assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumOff", 0);
// Second shape: lighter color: // Without the accompanying fix in place, this test would have failed with: // - Expected: 1 // - Actual : 0 // - XPath '//p:sp[2]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr' number of nodes is incorrect // i.e. the effects case did not write scheme colors.
assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr", "val",
u"accent1");
assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumMod", "val",
u"40000");
assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumOff", "val",
u"60000");
CPPUNIT_TEST_FIXTURE(Test, testThemeColor_ShapeFill)
{ // Given an ODP file that contains references to a theme for shape fill:
loadFromFile(u"ReferenceShapeFill.fodp");
// When saving that document:
save(u"Impress Office Open XML"_ustr);
// Then make sure the shape fill color is a scheme color. // Note that this was already working from PPTX files via grab-bags, //so this test intentionally uses an ODP file as input.
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr);
assertXPath(pXmlDoc, "//p:sp[1]/p:spPr/a:solidFill/a:schemeClr", "val", u"accent6");
assertXPath(pXmlDoc, "//p:sp[1]/p:spPr/a:solidFill/a:schemeClr/a:lumMod", "val", u"75000");
}
CPPUNIT_TEST_FIXTURE(Test, testTdf146690_endParagraphRunPropertiesNewLinesTextSize)
{ // Given a PPTX file that contains references to a theme:
loadFromFile(u"endParaRPr-newline-textsize.pptx");
// When saving that document:
save(u"Impress Office Open XML"_ustr);
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // Make sure the text size is exported correctly: // Without the accompanying fix in place, this test would have failed with: // - Expected: 500 // - Actual : 1800 // i.e. the endParaRPr 'size' wasn't exported correctly
assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p[1]/a:endParaRPr", "sz", u"500");
assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p[2]/a:endParaRPr", "sz", u"500");
assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p[3]/a:endParaRPr", "sz", u"500");
}
CPPUNIT_TEST_FIXTURE(Test, testTdf147978_endsubpath)
{ // Given an odp file that contains a non-primitive custom shape with command N
loadFromFile(u"tdf147978_endsubpath.odp");
// When saving that document:
save(u"Impress Office Open XML"_ustr);
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // Then make sure the pathLst has two child elements, // Without the accompanying fix in place, only one element a:path was exported.
assertXPathChildren(pXmlDoc, "//a:pathLst", 2); // and make sure first path with no stroke, second with no fill
assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "stroke", u"0");
assertXPath(pXmlDoc, "//a:pathLst/a:path[2]", "fill", u"none");
}
CPPUNIT_TEST_FIXTURE(Test, testTdf147978_commandA)
{ // Given an odp file that contains a non-primitive custom shape with command N
loadFromFile(u"tdf147978_enhancedPath_commandA.odp");
// When saving that document:
save(u"Impress Office Open XML"_ustr);
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // Then make sure the path has a child element arcTo. Prior to the fix that part of the curve was // not exported at all. In odp it is a command A. Such does not exist in OOXML and is therefore // exported as a:lnTo followed by a:arcTo
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:lnTo", 2);
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", 1); // And assert its attribute values
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "wR", u"7200");
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "hR", u"5400");
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "stAng", u"7719588");
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "swAng", u"-5799266");
}
CPPUNIT_TEST_FIXTURE(Test, testTdf147978_commandT)
{ // The odp file contains a non-primitive custom shape with commands MTZ
loadFromFile(u"tdf147978_enhancedPath_commandT.odp");
// Export to pptx had only exported the command M and has used a wrong path size
save(u"Impress Office Open XML"_ustr);
// Verify the markup:
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // File has draw:viewBox="0 0 216 216"
assertXPath(pXmlDoc, "//a:pathLst/a:path", "w", u"216");
assertXPath(pXmlDoc, "//a:pathLst/a:path", "h", u"216"); // Command T is exported as lnTo followed by arcTo.
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:moveTo", 1);
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:lnTo", 1);
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", 1);
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:close", 1); // And assert its values
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:moveTo/a:pt", "x", u"108");
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:moveTo/a:pt", "y", u"162");
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:lnTo/a:pt", "x", u"138");
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:lnTo/a:pt", "y", u"110");
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "wR", u"108");
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "hR", u"54");
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "stAng", u"18000000");
assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "swAng", u"18000000");
}
CPPUNIT_TEST_FIXTURE(Test, testTdf147978_commandXY)
{ // The odp file contains a non-primitive custom shapes with commands XY
loadFromFile(u"tdf147978_enhancedPath_commandXY.odp");
// Export to pptx had dropped commands X and Y.
save(u"Impress Office Open XML"_ustr);
CPPUNIT_TEST_FIXTURE(Test, testTdf147978_commandHIJK)
{ // The odp file contains a non-primitive custom shapes with commands H,I,J,K
loadFromFile(u"tdf147978_enhancedPath_commandHIJK.odp");
// Export to pptx had dropped commands X and Y.
save(u"Impress Office Open XML"_ustr);
// Verify the markup:
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // File has draw:viewBox="0 0 80 80"
assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "w", u"80");
assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "h", u"80"); // File uses from back to front J (lighten), I (lightenLess), normal fill, K (darkenLess), // H (darken). New feature, old versions did not export these at all.
assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "fill", u"lighten");
assertXPath(pXmlDoc, "//a:pathLst/a:path[2]", "fill", u"lightenLess");
assertXPathNoAttribute(pXmlDoc, "//a:pathLst/a:path[3]", "fill");
assertXPath(pXmlDoc, "//a:pathLst/a:path[4]", "fill", u"darkenLess");
assertXPath(pXmlDoc, "//a:pathLst/a:path[5]", "fill", u"darken");
}
CPPUNIT_TEST_FIXTURE(Test, testTdf147978_subpath)
{ // The odp file contains a non-primitive custom shapes with commands H,I,J,K
loadFromFile(u"tdf147978_enhancedPath_subpath.pptx");
// Export to pptx had dropped the subpaths.
save(u"Impress Office Open XML"_ustr);
CPPUNIT_TEST_FIXTURE(Test, testTdf100391TextAreaRect)
{ // The document has a custom shape of type "non-primitive" to trigger the custGeom export
loadFromFile(u"tdf100391_TextAreaRect.odp"); // When saving to PPTX the textarea rect was set to default instead of using the actual area
save(u"Impress Office Open XML"_ustr);
// Verify the markup. Without fix the values were l="l", t="t", r="r", b="b"
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr);
assertXPath(pXmlDoc, "//a:custGeom/a:rect", "l", u"textAreaLeft");
assertXPath(pXmlDoc, "//a:custGeom/a:rect", "t", u"textAreaTop");
assertXPath(pXmlDoc, "//a:custGeom/a:rect", "r", u"textAreaRight");
assertXPath(pXmlDoc, "//a:custGeom/a:rect", "b", u"textAreaBottom"); // The values are calculated in guides, for example
assertXPath(pXmlDoc, "//a:custGeom/a:gdLst/a:gd[1]", "name", u"textAreaLeft");
assertXPath(pXmlDoc, "//a:custGeom/a:gdLst/a:gd[1]", "fmla", u"*/ 1440000 w 2880000"); // The test reflects the state of Apr 2022. It needs to be adapted when export of handles and // guides is implemented.
}
CPPUNIT_TEST_FIXTURE(Test, testTdf109169_OctagonBevel)
{ // The odp file contains an "Octagon Bevel" shape. Such has shading not in commands H,I,J,K // but shading is generated in ctor of EnhancedCustomShape2d from the Type value.
loadFromFile(u"tdf109169_OctagonBevel.odt");
// FIXME: validation error in OOXML export: Errors: 1
skipValidation();
// Export to docx had not written a:fill or a:stroke attributes at all.
save(u"Office Open XML Text"_ustr);
// Verify the markup:
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // File should have six subpaths, one with stroke and five with fill
assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "stroke", u"0");
assertXPath(pXmlDoc, "//a:pathLst/a:path[2]", "fill", u"darkenLess");
assertXPath(pXmlDoc, "//a:pathLst/a:path[3]", "fill", u"darken");
assertXPath(pXmlDoc, "//a:pathLst/a:path[4]", "fill", u"darken");
assertXPath(pXmlDoc, "//a:pathLst/a:path[5]", "fill", u"lightenLess");
assertXPath(pXmlDoc, "//a:pathLst/a:path[6]", "fill", u"lighten");
}
CPPUNIT_TEST_FIXTURE(Test, testFaultyPathCommandsAWT)
{ // The odp file contains shapes whose path starts with command A, W, T or L. That is a faulty // path. LO is tolerant and renders it so that is makes a moveTo to the start point of the arc or // the end of the line respectively. Export to OOXML does the same now and writes a moveTo // instead of the normally used lnTo. If a lnTo is written, MS Office shows nothing of the shape.
loadFromFile(u"FaultyPathStart.odp");
save(u"Impress Office Open XML"_ustr);
// Verify the markup:
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // First child of a:path should be a moveTo in all four shapes.
assertXPath(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo");
assertXPath(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo");
assertXPath(pXmlDoc, "//p:spTree/p:sp[3]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo");
assertXPath(pXmlDoc, "//p:spTree/p:sp[4]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo");
}
CPPUNIT_TEST_FIXTURE(Test, testTdf148784StretchXY)
{ // The document has a custom shapes of type "non-primitive" to trigger the custGeom export. // They use formulas with 'right' and 'bottom'. // When saving to PPTX the attributes stretchpoint-x and stretchpoint-y were not considered. The // line at right and bottom edge were positioned inside as if the shape had a square size.
loadFromFile(u"tdf148784_StretchXY.odp");
save(u"Impress Office Open XML"_ustr);
// Verify the markup.
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr);
// x-position of last segment should be same as path width. It was 21600 without fix.
sal_Int32 nWidth
= getXPathContent(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/@w")
.toInt32();
sal_Int32 nPosX
= getXPathContent(
pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo[4]/a:pt/@x")
.toInt32();
CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchX", nWidth, nPosX);
// y-position of last segment should be same as path height. It was 21600 without fix.
sal_Int32 nHeight
= getXPathContent(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/@h")
.toInt32();
sal_Int32 nPosY
= getXPathContent(
pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo[4]/a:pt/@y")
.toInt32();
CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchY", nHeight, nPosY);
// The test reflects the state of Apr 2022. It needs to be adapted when export of handles and // guides is implemented.
}
CPPUNIT_TEST_FIXTURE(Test, testTdf148784StretchCommandQ)
{ // The document has a custom shapes of type "non-primitive" to trigger the custGeom export. // They use formulas with 'right' and 'bottom'. // When saving to PPTX the attributes stretchpoint-x and stretchpoint-y were not considered. // That results in wrong arcs on the right or bottom side of the shape.
loadFromFile(u"tdf148784_StretchCommandQ.odp");
save(u"Impress Office Open XML"_ustr);
// Verify the markup.
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr);
// x-position of second quadBezTo control should be same as path width. It was 21600 without fix.
sal_Int32 nWidth
= getXPathContent(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/@w")
.toInt32();
sal_Int32 nPosX
= getXPathContent(
pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/a:quadBezTo[2]/a:pt/@x")
.toInt32();
CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchX", nWidth, nPosX);
// y-position of third quadBezTo control should be same as path height. It was 21600 without fix.
sal_Int32 nHeight
= getXPathContent(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/@h")
.toInt32();
sal_Int32 nPosY
= getXPathContent(
pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/a:quadBezTo[3]/a:pt/@y")
.toInt32();
CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchY", nHeight, nPosY);
// The test reflects the state of Apr 2022. It needs to be adapted when export of handles and // guides is implemented.
}
CPPUNIT_TEST_FIXTURE(Test, testTdf148784StretchCommandVW)
{ // The document has a custom shapes of type "non-primitive" to trigger the custGeom export. // It should not need adaption when export of handles and guides is implemented because it // has only fixed values in the path. // When saving to PPTX the attributes stretchpoint-x and stretchpoint-y were not considered. // That results in circles instead of ellipses.
loadFromFile(u"tdf148784_StretchCommandVW.odp");
save(u"Impress Office Open XML"_ustr);
// Verify the markup.
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr);
// wR of first ArcTo in first shape should be same as path width/2. It was 10800 without fix.
sal_Int32 nHalfWidth
= getXPathContent(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/@w")
.toInt32()
/ 2;
sal_Int32 nWR
= getXPathContent(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/a:arcTo[1]/@wR")
.toInt32();
CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchX", nHalfWidth, nWR);
// hR of first ArcTo in second shape should be same as path height /2. It was 10800 without fix.
sal_Int32 nHalfHeight
= getXPathContent(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/@h")
.toInt32()
/ 2;
sal_Int32 nHR
= getXPathContent(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/a:arcTo[1]/@hR")
.toInt32();
CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchY", nHalfHeight, nHR);
}
CPPUNIT_TEST_FIXTURE(Test, testTdf149551VertPadding)
{ // The document has shape[1] with attribute vert="vert270" and shape[2] with vert="vert". The text // has paddings lIns="720000"=2cm, tIns="360000"=1cm, rIns="0" and bIns="0". // After load and save the paddings were rotated and a 90deg text rotation was added.
loadFromFile(u"tdf149551_vert_and_padding.pptx");
save(u"Impress Office Open XML"_ustr);
// Verify the markup. The values must be the same as in the original file.
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); for (sal_Int32 i = 1; i <= 2; i++)
{
OString sElement = "//p:spTree/p:sp[" + OString::number(i) + "]/p:txBody/a:bodyPr";
assertXPath(pXmlDoc, sElement, "lIns", u"720000");
assertXPath(pXmlDoc, sElement, "tIns", u"360000");
assertXPath(pXmlDoc, sElement, "rIns", u"0");
assertXPath(pXmlDoc, sElement, "bIns", u"0");
assertXPathNoAttribute(pXmlDoc, sElement, "rot");
}
}
CPPUNIT_TEST_FIXTURE(Test, testTdf149538upright)
{ // The document has a shape with attribute upright="1" in the bodyPr element. On import it is // emulated by rotating the text area rectangle. On export there should be an upright="1" // attribute but no 'rot' attribute. Without the fix the 'rot' attribute with values from // the emulation was written out.
loadFromFile(u"tdf149538_upright.pptx");
save(u"Impress Office Open XML"_ustr);
// Verify the markup. The values must be the same as in the original file.
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr);
assertXPath(pXmlDoc, "//p:spTree/p:sp/p:txBody/a:bodyPr", "upright", u"1");
assertXPathNoAttribute(pXmlDoc, "//p:spTree/p:sp/p:txBody/a:bodyPr", "rot");
}
CPPUNIT_TEST_FIXTURE(Test, testTdf151008VertAnchor)
{
loadFromFile(u"tdf151008_eaVertAnchor.pptx");
save(u"Impress Office Open XML"_ustr);
xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // The order of the shapes in the file is by name "Right", "Center", "Left", "RightMiddle", // "CenterMiddle" and "LeftMiddle". I access the shapes here by index, because the XPath is // easier then. // As of Sep 2022 LibreOffice does not write the default anchorCtr="0" // Right
assertXPath(pXmlDoc, "//p:spTree/p:sp[1]/p:txBody/a:bodyPr", "anchor", u"t");
assertXPathNoAttribute(pXmlDoc, "//p:spTree/p:sp[1]/p:txBody/a:bodyPr", "anchorCtr"); // Center
assertXPath(pXmlDoc, "//p:spTree/p:sp[2]/p:txBody/a:bodyPr", "anchor", u"ctr");
assertXPathNoAttribute(pXmlDoc, "//p:spTree/p:sp[2]/p:txBody/a:bodyPr", "anchorCtr"); // Left
assertXPath(pXmlDoc, "//p:spTree/p:sp[3]/p:txBody/a:bodyPr", "anchor", u"b");
assertXPathNoAttribute(pXmlDoc, "//p:spTree/p:sp[3]/p:txBody/a:bodyPr", "anchorCtr"); // RightMiddle
assertXPath(pXmlDoc, "//p:spTree/p:sp[4]/p:txBody/a:bodyPr", "anchor", u"t");
assertXPath(pXmlDoc, "//p:spTree/p:sp[4]/p:txBody/a:bodyPr", "anchorCtr", u"1"); // CenterMiddle
assertXPath(pXmlDoc, "//p:spTree/p:sp[5]/p:txBody/a:bodyPr", "anchor", u"ctr");
assertXPath(pXmlDoc, "//p:spTree/p:sp[5]/p:txBody/a:bodyPr", "anchorCtr", u"1"); // LeftMiddle
assertXPath(pXmlDoc, "//p:spTree/p:sp[6]/p:txBody/a:bodyPr", "anchor", u"b");
assertXPath(pXmlDoc, "//p:spTree/p:sp[6]/p:txBody/a:bodyPr", "anchorCtr", u"1");
}
CPPUNIT_TEST_FIXTURE(Test, testFontworkBitmapFill)
{ // The document has a Fontwork shape with bitmap fill.
loadFromFile(u"tdf128568_FontworkBitmapFill.odt");
// FIXME: validation error in OOXML export: Errors: 1 // Attribute ID is not allowed in element v:shape
skipValidation();
// Saving that to DOCX:
save(u"Office Open XML Text"_ustr);
// Make sure it is exported to VML and has no txbxContent but a textpath element. Without fix it // was exported as DML 'abc transform', but that is not able to use bitmap fill in Word.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
assertXPath(pXmlDoc, "//mc:alternateContent", 0);
assertXPath(pXmlDoc, "//v:shape/v:textbox/v:txbxContent", 0);
assertXPath(pXmlDoc, "//v:shape/v:textpath", 1);
// Without fix the bitmap was referenced by v:imagedata element. But that produces a picture // in Word not a WordArt shape. Instead a v:fill has to be used.
assertXPath(pXmlDoc, "//v:shape/v:imagedata", 0);
assertXPath(pXmlDoc, "//v:shape/v:fill", 1);
assertXPath(pXmlDoc, "//v:shape/v:fill[@r:id]", 1);
// The fill is set to 'stretched' in LO, that is type="frame" in VML. That was not implemented // in VML export.
assertXPath(pXmlDoc, "//v:shape/v:fill", "type", u"frame");
}
CPPUNIT_TEST_FIXTURE(Test, testFontworkFontProperties)
{ // The document has five Fontwork shapes. They have bitmap fill and thus are exported to VML. // They differ in font properties e.g. font weight and character spacing.
loadFromFile(u"tdf128568_FontworkFontProperties.odt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
// Save to DOCX:
save(u"Office Open XML Text"_ustr);
// Make sure the style attribute of the textpath element has the needed items. Without fix only // font-family and font-size were written.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
OUString sStyle; // bold
sStyle = getXPath(pXmlDoc, "(//v:shape)[1]/v:textpath", "style");
CPPUNIT_ASSERT(sStyle.indexOf("font-weight:bold") > -1); // italic
sStyle = getXPath(pXmlDoc, "(//v:shape)[2]/v:textpath", "style");
CPPUNIT_ASSERT(sStyle.indexOf("font-style:italic") > -1); // character spacing 'very loose', 150 * 655, see escherex.cxx
sStyle = getXPath(pXmlDoc, "(//v:shape)[3]/v:textpath", "style");
CPPUNIT_ASSERT(sStyle.indexOf("v-text-spacing:98250f") > -1); // character spacing 'tight', 90 * 655, see escherex.cxx
sStyle = getXPath(pXmlDoc, "(//v:shape)[4]/v:textpath", "style");
CPPUNIT_ASSERT(sStyle.indexOf("v-text-spacing:58950f") > -1); // same letter heights
sStyle = getXPath(pXmlDoc, "(//v:shape)[5]/v:textpath", "style");
CPPUNIT_ASSERT(sStyle.indexOf("v-same-letter-heights:t") > -1);
}
CPPUNIT_TEST_FIXTURE(Test, testVMLFontworkSlantUp)
{ // The document has a Fontwork shape type 'textSlantUp' (172). When exporting to docx, Word does // not recognize its markup as preset WordArt, because the used markup differs from what Word // expects for this type of shape. As a result Word saves the shape as having custom geometry // and such is not understand by LibreOffice.
loadFromFile(u"tdf153296_VML_export_SlantUp.odt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
// Save to DOCX:
save(u"Office Open XML Text"_ustr);
// Examine the saved markup. I could identify the following two problems to hinder Word from // accepting the markup. There might exist more problems.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
// Make sure a <v:path> element exists and has an o:connecttype attribute
assertXPath(pXmlDoc, "//v:shapetype/v:path", 1);
assertXPath(pXmlDoc, "//v:shapetype/v:path[@o:connecttype]", 1);
// Make sure the handle position is written without reference to a formula
OUString sPosition = getXPath(pXmlDoc, "//v:h", "position");
CPPUNIT_ASSERT_EQUAL(sal_Int32(-1), sPosition.indexOf("@"));
CPPUNIT_ASSERT_EQUAL(u"topLeft,#0"_ustr, sPosition);
}
CPPUNIT_TEST_FIXTURE(Test, testVMLFontworkArchUp)
{ // The document has a Fontwork shape type 'textArchUp' (172). When exporting to docx, the shape // was not exported as VML Fontwork but as a rectangle.
loadFromFile(u"tdf153296_VML_export_ArchUpCurve.odt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
// Save to DOCX:
save(u"Office Open XML Text"_ustr);
// Examine the saved markup.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
// Make sure there is no <v:rect> element
assertXPath(pXmlDoc, "//v:rect", 0); // ..., but a <v:shapetype> element with <v:textpath> subelement
assertXPath(pXmlDoc, "//v:shapetype/v:textpath", 1);
}
CPPUNIT_TEST_FIXTURE(Test, testVMLAdjustmentExport)
{ // The document has a Fontwork shape type 'textCirclePour' (150). When exporting to docx, the // adjustment values were not exported at all.
loadFromFile(u"tdf153246_VML_export_Fontwork_Adjustment.odt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
// Save to DOCX:
save(u"Office Open XML Text"_ustr);
// Examine the saved markup.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
// Make sure an "adj" attribute exists
assertXPath(pXmlDoc, "//v:shape[@adj]", 1); // ... and has the correct values
OUString sAdjustments = getXPath(pXmlDoc, "//v:shape", "adj");
sal_Int32 nTokenStart = 0;
OUString sAngle = sAdjustments.getToken(0, ',', nTokenStart);
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(-7341733), sAngle.toInt32(), 2);
OUString sRadius = sAdjustments.copy(nTokenStart);
CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(5296), sRadius.toInt32(), 2);
}
CPPUNIT_TEST_FIXTURE(Test, testFontworkDirectColor)
{ // The document has a Fontwork shape with fill #2e8b57 plus 60% transparency and line color // #ff7f50 with 20% transparency. When exporting to docx, line color was not exported at all // and fill color was replaced with character color.
loadFromFile(u"tdf51195_Fontwork_DirectColor.odt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
// Save to DOCX:
save(u"Office Open XML Text"_ustr);
// ... and w14:textFill exists and has correct values.
assertXPath(pXmlDoc, sElement + "w14:textFill", 1);
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:srgbClr", "val", u"2e8b57");
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:srgbClr/w14:alpha", "val",
u"60000");
}
CPPUNIT_TEST_FIXTURE(Test, testFontworkThemeColor)
{ // The document has a Fontwork shape with fill theme color 'lt2' and 50% darker, and a Fontwork // shape with theme color 'dk2' and 40% lighter. When exporting to docx, fill color was not // exported as theme color at all, and it was replaced with character color.
loadFromFile(u"tdf51195_Fontwork_ThemeColor.fodt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
// Save to DOCX:
save(u"Office Open XML Text"_ustr);
// Examine the saved markup.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
// shape with 'darker'
OString sElement = "/w:document/w:body/w:p[2]/w:r/mc:AlternateContent[1]/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr;
// Make sure the fallback in <w:color> has correct values
assertXPath(pXmlDoc, sElement + "w:color", "val", u"948A54");
assertXPath(pXmlDoc, sElement + "w:color", "themeColor", u"light2");
assertXPath(pXmlDoc, sElement + "w:color", "themeShade", u"80");
// ... and w14:textFill exists and has correct values.
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr", "val", u"bg2");
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr/w14:lumMod", "val",
u"50000");
// shape with 'lighter'
sElement = "/w:document/w:body/w:p[2]/w:r/mc:AlternateContent[2]/mc:Choice/w:drawing/wp:anchor/" "a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/w:rPr/"_ostr;
// Make sure the fallback in <w:color> has correct values
assertXPath(pXmlDoc, sElement + "w:color", "val", u"558ED5");
assertXPath(pXmlDoc, sElement + "w:color", "themeColor", u"dark2");
assertXPath(pXmlDoc, sElement + "w:color", "themeTint", u"99");
// ... and w14:textFill exists and has correct values.
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr", "val", u"tx2");
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr/w14:lumMod", "val",
u"60000");
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr/w14:lumOff", "val",
u"40000");
}
CPPUNIT_TEST_FIXTURE(Test, testFontworkDistance)
{ // LO ignores 'Spacing to Borders' of the 'Text Attributes' for Fontwork shapes. Word interprets // them. Make sure we force them to zero on export to docx, otherwise Word might wrap the text.
loadFromFile(u"tdf51195_Fontwork_Distance.odt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
// Save to DOCX:
save(u"Office Open XML Text"_ustr);
CPPUNIT_TEST_FIXTURE(Test, testFontworkLinGradientRGBColor)
{ // The document has a Fontwork shape with UI settings: linear gradient fill with angle 330deg, // start color #ffff00 (Yellow) with 'Intensity' 80%, end color #4682B4 (Steel Blue), Transition // Start 25% and solid transparency 30%. // Without fix the gradient was not exported at all.
loadFromFile(u"tdf51195_Fontwork_linearGradient.fodt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
// Save to DOCX:
save(u"Office Open XML Text"_ustr);
// Examine the saved markup.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
// path to shape text run properties
OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr;
// Make sure w14:textFill and w14:gradFill elements exist with child elements
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1);
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); // 330deg gradient rotation = 120deg color transition direction
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:lin", "ang", u"7200000");
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:lin", "scaled", u"0");
// Make sure the color stops have correct position and color // The 'intensity' property in the UI has a different algorithm than the 'lumMod' attribute in // OOXML. Therefore it cannot be exported as 'lumMod' but need to be incorporated into the color.
sElement += "w14:textFill/w14:gradFill/w14:gsLst/";
assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos", u"0");
assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr", "val", u"cccc00");
assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr/w14:alpha", "val", u"30000");
CPPUNIT_TEST_FIXTURE(Test, testFontworkAxialGradientTransparency)
{ // The document has a Fontwork shape with UI settings: solid fill theme color Accent3 25% darker, // Transparency gradient Type Axial with Angle 160deg, Transition start 40%, // Start value 5%, End value 90% // Without fix the gradient was not exported at all.
loadFromFile(u"tdf51195_Fontwork_axialGradient.fodt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
// Save to DOCX:
save(u"Office Open XML Text"_ustr);
// Examine the saved markup.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
// path to shape text run properties
OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr;
// Make sure w14:textFill and w14:gradFill elements exist with child elements
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1);
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); // 160deg gradient rotation = 290deg (360deg-160deg+90deg) color transition direction
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:lin", "ang", u"17400000");
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:lin", "scaled", u"0");
// Make sure the color stops have correct position and color
sElement += "w14:textFill/w14:gradFill/w14:gsLst/"; // gradient is in transparency, color is always the same. for (char ch = '1'; ch <= '3'; ++ch)
{
assertXPath(pXmlDoc, sElement + "w14:gs[" + OStringChar(ch) + "]/w14:schemeClr", "val",
u"accent3");
assertXPath(pXmlDoc, sElement + "w14:gs[" + OStringChar(ch) + "]/w14:schemeClr/w14:lumMod", "val", u"75000");
} // transparency values are not exactly like in UI because converting through rgb-color. // border 40% in UI means 20% on each side.
assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos", u"20000");
assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr/w14:alpha", "val", u"89800");
assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos", u"50000");
assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr/w14:alpha", "val", u"4710");
assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos", u"80000");
assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:schemeClr/w14:alpha", "val", u"89800");
}
CPPUNIT_TEST_FIXTURE(Test, testFontworkRadialGradient)
{ // The document has a Fontwork shape with UI settings: gradient fill, Type radial, // From Color #40E0D0, To Color #FF0000, Center x|y 75%|20%, no transparency // Transition start 10% // Without fix the gradient was not exported at all.
loadFromFile(u"tdf51195_Fontwork_radialGradient.fodt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
// Save to DOCX:
save(u"Office Open XML Text"_ustr);
// Examine the saved markup.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
// path to shape text run properties
OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr;
// Make sure w14:textFill and w14:gradFill elements exist with child elements
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1);
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3);
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path", "path", u"circle");
assertXPathAttrs(
pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path/w14:fillToRect",
{ { "l", u"75000" }, { "t", u"20000" }, { "r", u"25000" }, { "b", u"80000" } });
// Make sure the color stops have correct position and color // The first stop is duplicated to force Word to render the gradient same as LO.
sElement += "w14:textFill/w14:gradFill/w14:gsLst/";
assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos", u"0");
assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr", "val", u"ff0000");
assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos", u"0");
assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:srgbClr", "val", u"ff0000");
assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos", u"90000");
assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr", "val", u"40e0d0");
}
CPPUNIT_TEST_FIXTURE(Test, testFontworkEllipticalGradient)
{ // The document has a Fontwork shape with UI settings: solid fill, Color #00008B (deep blue), // transparency gradient type Ellipsoid, Center x|y 50%|50%, Transition Start 50%, // Start 70%, End 0%. // Without fix the gradient was not exported at all.
loadFromFile(u"tdf51195_Fontwork_ellipticalGradient.fodt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
// Save to DOCX:
save(u"Office Open XML Text"_ustr);
// Examine the saved markup.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
// path to shape text run properties
OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr;
// Make sure w14:textFill and w14:gradFill elements exist with child elements
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1);
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3);
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path", "path", u"circle");
assertXPathAttrs(
pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path/w14:fillToRect",
{ { "l", u"50000" }, { "t", u"50000" }, { "r", u"50000" }, { "b", u"50000" } });
// Make sure the color stops have correct position and color // transparency values are not exactly like in UI because converting through rgb-color.
sElement += "w14:textFill/w14:gradFill/w14:gsLst/";
assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos", u"0");
assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr", "val", u"00008b"); // stop is duplicated to force Word to same rendering as LO does.
assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos", u"0");
assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:srgbClr", "val", u"00008b");
assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos", u"50000");
assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr", "val", u"00008b");
assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr/w14:alpha", "val", u"69800");
}
CPPUNIT_TEST_FIXTURE(Test, testFontworkSquareGradient)
{ // The document has a Fontwork shape with UI settings: gradient fill Type "Square (Quadratic)", // From Color #4963ef 40%, To Color #ffff6e 90%, Center x|y 100%|50%, // no transparency // Without fix the gradient was not exported at all.
loadFromFile(u"tdf51195_Fontwork_squareGradient.fodt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
// Save to DOCX:
save(u"Office Open XML Text"_ustr);
// Examine the saved markup.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
// path to shape text run properties
OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr;
// Make sure w14:textFill and w14:gradFill elements exist with child elements
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1);
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3);
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path", "path", u"rect");
assertXPathAttrs(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path/w14:fillToRect",
{ { "l", u"100000" }, { "t", u"50000" }, { "r", u"0" }, { "b", u"50000" } });
// Make sure the color stops have correct position and color // The 'intensity' property in the UI has a different algorithm than the 'lumMod' attribute in // OOXML. Therefore it cannot be exported as 'lumMod' but need to be incorporated into the color.
sElement += "w14:textFill/w14:gradFill/w14:gsLst/";
assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos", u"0");
assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr", "val", u"e6e663");
assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos", u"0");
assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:srgbClr", "val", u"e6e663");
assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos", u"100000");
assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr", "val", u"1d4860");
}
CPPUNIT_TEST_FIXTURE(Test, testFontworkRectGradient)
{ // The document has a Fontwork shape with UI settings: solid color theme Accent 4 60% lighter, // transparency gradient Type "Rectangular", Center x|y 50%|50%, Transition start 10%, // Start value 70%, End value 5%. // Without fix the gradient was not exported at all.
loadFromFile(u"tdf51195_Fontwork_rectGradient.fodt");
// FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'.
skipValidation();
// Save to DOCX:
save(u"Office Open XML Text"_ustr);
// Examine the saved markup.
xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr);
// path to shape text run properties
OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr;
// Make sure w14:textFill and w14:gradFill elements exist with child elements
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1);
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3);
assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path", "path", u"rect");
assertXPathAttrs(
pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path/w14:fillToRect",
{ { "l", u"50000" }, { "t", u"50000" }, { "r", u"50000" }, { "b", u"50000" } });
// Make sure the color stops have correct position and color // transparency values are not exactly like in UI because converting through rgb-color.
sElement += "w14:textFill/w14:gradFill/w14:gsLst/";
assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos", u"0");
assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr", "val", u"accent4");
assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr/w14:lumMod", "val", u"40000");
assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr/w14:lumOff", "val", u"60000");
assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr/w14:alpha", "val", u"4710"); // The first stop is duplicated to force Word to render the gradient same as LO.
assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos", u"0");
assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr", "val", u"accent4");
assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr/w14:lumMod", "val", u"40000");
assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr/w14:lumOff", "val", u"60000");
assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr/w14:alpha", "val", u"4710");
assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos", u"90000");
assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:schemeClr", "val", u"accent4");
assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:schemeClr/w14:lumMod", "val", u"40000");
--> --------------------
--> maximum size reached
--> --------------------
Messung V0.5
¤ Dauer der Verarbeitung: 0.22 Sekunden
(vorverarbeitet)
¤
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.
