Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/LibreOffice/sd/source/ui/dlg/   (Office von Apache Version 25.8.3.2©)  Datei vom 5.10.2025 mit Größe 8 kB image not shown  

Quelle  sdpreslt.cxx   Sprache: C

 
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */


#include <svl/itemset.hxx>
#include <svl/eitem.hxx>
#include <svl/stritem.hxx>
#include <sfx2/new.hxx>
#include <svtools/valueset.hxx>
#include <tools/debug.hxx>
#include <vcl/image.hxx>

#include <strings.hrc>

#include <bitmaps.hlst>
#include <sdpreslt.hxx>
#include <sdattr.hrc>
#include <sdresid.hxx>
#include <drawdoc.hxx>
#include <sdpage.hxx>
#include <DrawDocShell.hxx>
#include <memory>

SdPresLayoutDlg::SdPresLayoutDlg(::sd::DrawDocShell* pDocShell,
    weld::Window* pWindow, const SfxItemSet& rInAttrs)
    : GenericDialogController(pWindow, u"modules/simpress/ui/slidedesigndialog.ui"_ustr, u"SlideDesignDialog"_ustr)
    , mpDocSh(pDocShell)
    , mrOutAttrs(rInAttrs)
    , maStrNone(SdResId(STR_NULL))
    , m_xCbxMasterPage(m_xBuilder->weld_check_button(u"masterpage"_ustr))
    , m_xCbxCheckMasters(m_xBuilder->weld_check_button(u"checkmasters"_ustr))
    , m_xBtnLoad(m_xBuilder->weld_button(u"load"_ustr))
    , m_xVS(new ValueSet(m_xBuilder->weld_scrolled_window(u"selectwin"_ustr, true)))
    , m_xVSWin(new weld::CustomWeld(*m_xBuilder, u"select"_ustr, *m_xVS))
    , m_xLabel(m_xBuilder->weld_label(u"label1"_ustr))
{
    if (mpDocSh->GetDoc()->GetDocumentType() == DocumentType::Draw)
    {
        m_xDialog->set_title(SdResId(STR_AVAILABLE_MASTERPAGE));
        m_xLabel->set_label(SdResId(STR_SELECT_PAGE));
    }
    else
    {
        m_xDialog->set_title(SdResId(STR_AVAILABLE_MASTERSLIDE));
        m_xLabel->set_label(SdResId(STR_SELECT_SLIDE));
    }
    m_xVSWin->set_size_request(m_xBtnLoad->get_approximate_digit_width() * 60,
                               m_xBtnLoad->get_text_height() * 20);

    m_xVS->SetDoubleClickHdl(LINK(this, SdPresLayoutDlg, ClickLayoutHdl));
    m_xBtnLoad->connect_clicked(LINK(this, SdPresLayoutDlg, ClickLoadHdl));

    Reset();
}

SdPresLayoutDlg::~SdPresLayoutDlg()
{
}

/**
 *    Initialize
 */

void SdPresLayoutDlg::Reset()
{
    tools::Long nName;

    // replace master page
    ifconst SfxBoolItem* pPoolItem = mrOutAttrs.GetItemIfSet( ATTR_PRESLAYOUT_MASTER_PAGE, false ) )
    {
        bool bMasterPage = pPoolItem->GetValue();
        m_xCbxMasterPage->set_sensitive( !bMasterPage );
        m_xCbxMasterPage->set_active( bMasterPage );
    }

    // remove not used master pages
    m_xCbxCheckMasters->set_active(false);

    ifconst SfxStringItem* pPoolItem = mrOutAttrs.GetItemIfSet(ATTR_PRESLAYOUT_NAME) )
        maName = pPoolItem->GetValue();
    else
        maName.clear();

    FillValueSet();

    mnLayoutCount = maLayoutNames.size();
    for( nName = 0; nName < mnLayoutCount; nName++ )
    {
        if (maLayoutNames[nName] == maName)
            break;
    }
    DBG_ASSERT(nName < mnLayoutCount, "Layout not found");

    m_xVS->SelectItem(static_cast<sal_uInt16>(nName) + 1);  // Indices of the ValueSets start at 1

}

/**
 * Fills the provided Item-Set with dialog box attributes
 */

void SdPresLayoutDlg::GetAttr(SfxItemSet& rOutAttrs)
{
    short nId = m_xVS->GetSelectedItemId();
    bool bLoad = nId > mnLayoutCount;
    rOutAttrs.Put( SfxBoolItem( ATTR_PRESLAYOUT_LOAD, bLoad ) );

    OUString aLayoutName;

    if( bLoad )
    {
        aLayoutName = maName + "#" + maLayoutNames[ nId - 1 ];
    }
    else if (nId)
    {
        aLayoutName = maLayoutNames[ nId - 1 ];
        if( aLayoutName == maStrNone )
            aLayoutName.clear(); // that way we encode "- nothing -" (see below)
    }

    rOutAttrs.Put( SfxStringItem( ATTR_PRESLAYOUT_NAME, aLayoutName ) );
    rOutAttrs.Put( SfxBoolItem( ATTR_PRESLAYOUT_MASTER_PAGE, m_xCbxMasterPage->get_active() ) );
    rOutAttrs.Put( SfxBoolItem( ATTR_PRESLAYOUT_CHECK_MASTERS, m_xCbxCheckMasters->get_active() ) );
}

/**
 * Fills ValueSet with bitmaps
 */

void SdPresLayoutDlg::FillValueSet()
{
    m_xVS->SetStyle(m_xVS->GetStyle() | WB_ITEMBORDER | WB_DOUBLEBORDER
                                      | WB_VSCROLL | WB_NAMEFIELD);

    m_xVS->SetColCount(2);
    m_xVS->SetLineCount(2);
    m_xVS->SetExtraSpacing(2);

    SdDrawDocument* pDoc = mpDocSh->GetDoc();

    sal_uInt16 nCount = pDoc->GetMasterPageCount();

    for (sal_uInt16 nLayout = 0; nLayout < nCount; nLayout++)
    {
        SdPage* pMaster = static_cast<SdPage*>(pDoc->GetMasterPage(nLayout));
        if (pMaster->GetPageKind() == PageKind::Standard)
        {
            OUString aLayoutName(pMaster->GetLayoutName());
            aLayoutName = aLayoutName.copy(0, aLayoutName.indexOf(SD_LT_SEPARATOR));
            maLayoutNames.push_back(aLayoutName);

            Image aBitmap(mpDocSh->GetPagePreviewBitmap(pMaster));
            m_xVS->InsertItem(static_cast<sal_uInt16>(maLayoutNames.size()), aBitmap, aLayoutName);
        }
    }

    m_xVS->Show();
}

/**
 * DoubleClick handler
 */

IMPL_LINK_NOARG(SdPresLayoutDlg, ClickLayoutHdl, ValueSet*, void)
{
    m_xDialog->response(RET_OK);
}

/**
 * Click handler for load button
 */

IMPL_LINK_NOARG(SdPresLayoutDlg, ClickLoadHdl, weld::Button&, void)
{
    SfxNewFileDialog aDlg(m_xDialog.get(), SfxNewFileDialogMode::Preview);
    if (mpDocSh->GetDoc()->GetDocumentType() == DocumentType::Draw)
        aDlg.set_title(SdResId(STR_LOAD_DRAWING_LAYOUT));
    else
        aDlg.set_title(SdResId(STR_LOAD_PRESENTATION_LAYOUT));
    sal_uInt16 nResult = aDlg.run();

    bool   bCancel = false;

    switch (nResult)
    {
        case RET_OK:
        {
            if (aDlg.IsTemplate())
            {
                maName = aDlg.GetTemplateFileName();
            }
            else
            {
                // that way we encode "- nothing -"
                maName.clear();
            }
        }
        break;

        default:
            bCancel = true;
    }

    if( bCancel )
        return;

    // check if template already exists
    OUString aCompareStr(maName);
    if (aCompareStr.isEmpty())
        aCompareStr = maStrNone;

    auto it = std::find(maLayoutNames.begin(), maLayoutNames.end(), aCompareStr);
    if (it != maLayoutNames.end())
    {
        sal_uInt16 aPos = static_cast<sal_uInt16>(std::distance(maLayoutNames.begin(), it));
        // select template
        m_xVS->SelectItem( aPos + 1 );
    }
    else
    {
        // load document in order to determine preview bitmap (if template is selected)
        if (!maName.isEmpty())
        {
            // determine document in order to call OpenBookmarkDoc
            SdDrawDocument* pDoc = mpDocSh->GetDoc();
            SdDrawDocument* pTemplDoc  = pDoc->OpenBookmarkDoc( maName );

            if (pTemplDoc)
            {
                ::sd::DrawDocShell*  pTemplDocSh= pTemplDoc->GetDocSh();

                sal_uInt16 nCount = pTemplDoc->GetMasterPageCount();

                for (sal_uInt16 nLayout = 0; nLayout < nCount; nLayout++)
                {
                    SdPage* pMaster = static_cast<SdPage*>( pTemplDoc->GetMasterPage(nLayout) );
                    if (pMaster->GetPageKind() == PageKind::Standard)
                    {
                        OUString aLayoutName(pMaster->GetLayoutName());
                        aLayoutName = aLayoutName.copy(0, aLayoutName.indexOf(SD_LT_SEPARATOR));
                        maLayoutNames.push_back(aLayoutName);

                        Image aBitmap(pTemplDocSh->GetPagePreviewBitmap(pMaster));
                        m_xVS->InsertItem(static_cast<sal_uInt16>(maLayoutNames.size()), aBitmap, aLayoutName);
                    }
                }
            }
            else
            {
                bCancel = true;
            }

            pDoc->CloseBookmarkDoc();
        }
        else
        {
            // empty layout
            maLayoutNames.push_back(maStrNone);
            m_xVS->InsertItem( static_cast<sal_uInt16>(maLayoutNames.size()),
                    Image(BMP_SLIDE_NONE), maStrNone );
        }

        if (!bCancel)
        {
            // select template
            m_xVS->SelectItem( static_cast<sal_uInt16>(maLayoutNames.size()) );
        }
    }
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

Messung V0.5
C=97 H=95 G=95

¤ Dauer der Verarbeitung: 0.11 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.