Richtek RT1711H TypeC PD Controller.
Required properties:
- compatible : Must be "richtek,rt1711h".
- reg : Must be 0x4e, it's slave address of RT1711H.
- interrupts : <a b> where a is the interrupt number and b represents an
encoding of the sense and level information for the interrupt.
Required sub-node:
- connector: The "usb-c-connector" attached to the tcpci chip, the bindings
of connector node are specified in
Documentation/devicetree/bindings/connector/usb-connector.yaml
Example :
rt1711h@4e {
compatible = "richtek,rt1711h";
reg = <0x4e>;
interrupt-parent = <&gpio26>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
usb_con: connector {
compatible = "usb-c-connector";
label = "USB-C";
data-role = "dual";
power-role = "dual";
try-power-role = "sink";
source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
PDO_VAR(5000, 12000, 2000)>;
op-sink-microwatt = <10000000>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
usb_con_ss: endpoint {
remote-endpoint = <&usb3_data_ss>;
};
};
};
};
};
