Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/arch/arm/boot/dts/ti/omap/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 13 kB image not shown  

Quelle  am5729-beagleboneai.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2014-2019 Texas Instruments Incorporated - https://www.ti.com/
 */

/dts-v1/;

#include "dra74x.dtsi"
#include "am57xx-commercial-grade.dtsi"
#include "dra74x-mmc-iodelay.dtsi"
#include "dra74-ipu-dsp-common.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/dra.h>

/ {
 model = "BeagleBoard.org BeagleBone AI";
 compatible = "beagle,am5729-beagleboneai", "ti,am5728",
       "ti,dra742", "ti,dra74", "ti,dra7";

 aliases {
  rtc0 = &tps659038_rtc;
  rtc1 = &rtc;
  display0 = &hdmi_conn;
 };

 chosen {
  stdout-path = &uart1;
 };

 memory@0 {
  device_type = "memory";
  reg = <0x0 0x80000000 0x0 0x40000000>;
 };

 reserved-memory {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;

  ipu2_memory_region: ipu2-memory@95800000 {
   compatible = "shared-dma-pool";
   reg = <0x0 0x95800000 0x0 0x3800000>;
   reusable;
   status = "okay";
  };

  dsp1_memory_region: dsp1-memory@99000000 {
   compatible = "shared-dma-pool";
   reg = <0x0 0x99000000 0x0 0x4000000>;
   reusable;
   status = "okay";
  };

  ipu1_memory_region: ipu1-memory@9d000000 {
   compatible = "shared-dma-pool";
   reg = <0x0 0x9d000000 0x0 0x2000000>;
   reusable;
   status = "okay";
  };

  dsp2_memory_region: dsp2-memory@9f000000 {
   compatible = "shared-dma-pool";
   reg = <0x0 0x9f000000 0x0 0x800000>;
   reusable;
   status = "okay";
  };

 };

 vdd_adc: gpioregulator-vdd_adc {
  compatible = "regulator-gpio";
  regulator-name = "vdd_adc";
  vin-supply = <&vdd_5v>;
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <3300000>;
  regulator-always-on;
  regulator-boot-on;
  gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
  states = <1800000 0
   3300000 1>;
 };

 vdd_5v: fixedregulator-vdd_5v {
  compatible = "regulator-fixed";
  regulator-name = "vdd_5v";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  regulator-always-on;
  regulator-boot-on;
 };

 vtt_fixed: fixedregulator-vtt {
  /* TPS51200 */
  compatible = "regulator-fixed";
  regulator-name = "vtt_fixed";
  vin-supply = <&vdd_ddr>;
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  regulator-always-on;
  regulator-boot-on;
 };

 leds {
  compatible = "gpio-leds";

  led0 {
   label = "beaglebone:green:usr0";
   gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "heartbeat";
   default-state = "off";
  };

  led1 {
   label = "beaglebone:green:usr1";
   gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "mmc0";
   default-state = "off";
  };

  led2 {
   label = "beaglebone:green:usr2";
   gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "cpu";
   default-state = "off";
  };

  led3 {
   label = "beaglebone:green:usr3";
   gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "mmc1";
   default-state = "off";
  };

  led4 {
   label = "beaglebone:green:usr4";
   gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "netdev";
   default-state = "off";
  };
 };

 hdmi_conn: connector@0 {
  compatible = "hdmi-connector";
  label = "hdmi";
  type = "a";

  port {
   hdmi_connector_in: endpoint {
    remote-endpoint = <&hdmi_encoder_out>;
   };
  };
 };

 hdmi_enc: encoder@0 {
  /* "ti,tpd12s016" software compatible with "ti,tpd12s015"
   *  no need for individual driver
   */
  compatible = "ti,tpd12s015";
  gpios = <0>,
   <0>,
   <&gpio7 12 GPIO_ACTIVE_HIGH>;

  ports {
   #address-cells = <0x1>;
   #size-cells = <0x0>;

   port@0 {
    reg = <0x0>;

    hdmi_encoder_in: endpoint@0 {
     remote-endpoint = <&hdmi_out>;
    };
   };

   port@1 {
    reg = <0x1>;

    hdmi_encoder_out: endpoint@0 {
     remote-endpoint = <&hdmi_connector_in>;
    };
   };
  };
 };

 emmc_pwrseq: emmc_pwrseq {
  compatible = "mmc-pwrseq-emmc";
  reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
 };

 brcmf_pwrseq: brcmf_pwrseq {
  compatible = "mmc-pwrseq-simple";
  reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>, /* BT-REG-ON */
    <&gpio3 18 GPIO_ACTIVE_LOW>; /* WL-REG-ON */
 };

 extcon_usb1: extcon_usb1 {
  compatible = "linux,extcon-usb-gpio";
  id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 };
};

&i2c1 {
 status = "okay";
 clock-frequency = <400000>;

 tps659038: tps659038@58 {
  compatible = "ti,tps659038";
  reg = <0x58>;
  interrupt-parent = <&gpio6>;
  interrupts = <16 IRQ_TYPE_LEVEL_LOW>;

  #interrupt-cells = <2>;
  interrupt-controller;

  ti,system-power-controller;
  ti,palmas-override-powerhold;

  tps659038_pmic {
   compatible = "ti,tps659038-pmic";

   smps12-in-supply = <&vdd_5v>;
   smps3-in-supply = <&vdd_5v>;
   smps45-in-supply = <&vdd_5v>;
   smps6-in-supply = <&vdd_5v>;
   smps7-in-supply = <&vdd_5v>;
   mps3-in-supply = <&vdd_5v>;
   smps8-in-supply = <&vdd_5v>;
   smps9-in-supply = <&vdd_5v>;
   ldo1-in-supply = <&vdd_5v>;
   ldo2-in-supply = <&vdd_5v>;
   ldo3-in-supply = <&vdd_5v>;
   ldo4-in-supply = <&vdd_5v>;
   ldo9-in-supply = <&vdd_5v>;
   ldoln-in-supply = <&vdd_5v>;
   ldousb-in-supply = <&vdd_5v>;
   ldortc-in-supply = <&vdd_5v>;

   regulators {
    vdd_mpu: smps12 {
     /* VDD_MPU */
     regulator-name = "smps12";
     regulator-min-microvolt = <850000>;
     regulator-max-microvolt = <1250000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_ddr: smps3 {
     /* VDD_DDR EMIF1 EMIF2 */
     regulator-name = "smps3";
     regulator-min-microvolt = <1350000>;
     regulator-max-microvolt = <1350000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_dspeve: smps45 {
     /* VDD_DSPEVE on AM572 */
     regulator-name = "smps45";
     regulator-min-microvolt = < 850000>;
     regulator-max-microvolt = <1250000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_gpu: smps6 {
     /* VDD_GPU */
     regulator-name = "smps6";
     regulator-min-microvolt = < 850000>;
     regulator-max-microvolt = <1250000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_core: smps7 {
     /* VDD_CORE */
     regulator-name = "smps7";
     regulator-min-microvolt = < 850000>; /*** 1.15V */
     regulator-max-microvolt = <1150000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_iva: smps8 {
     /* VDD_IVAHD */    /*** 1.06V */
     regulator-name = "smps8";
    };

    vdd_3v3: smps9 {
     /* VDD_3V3 */
     regulator-name = "smps9";
     regulator-min-microvolt = <3300000>;
     regulator-max-microvolt = <3300000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_sd: ldo1 {
     /* VDDSHV8 - VSDMMC  */
     regulator-name = "ldo1";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <3300000>;
     regulator-boot-on;
     regulator-always-on;
    };

    vdd_1v8: ldo2 {
     /* VDDSH18V */
     regulator-name = "ldo2";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_1v8_phy_ldo3: ldo3 {
     /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
     regulator-name = "ldo3";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_1v8_phy_ldo4: ldo4 {
     /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
     regulator-name = "ldo4";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-always-on;
     regulator-boot-on;
    };

    /* LDO5-8 unused */

    vdd_rtc: ldo9 {
     /* VDD_RTC  */
     regulator-name = "ldo9";
     regulator-min-microvolt = < 840000>;
     regulator-max-microvolt = <1160000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_1v8_pll: ldoln {
     /* VDDA_1V8_PLL */
     regulator-name = "ldoln";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-always-on;
     regulator-boot-on;
    };

    ldousb_reg: ldousb {
     /* VDDA_3V_USB: VDDA_USBHS33 */
     regulator-name = "ldousb";
     regulator-min-microvolt = <3300000>;
     regulator-max-microvolt = <3300000>;
     regulator-always-on;
     regulator-boot-on;
    };

    ldortc_reg: ldortc {
     /* VDDA_RTC  */
     regulator-name = "ldortc";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-always-on;
     regulator-boot-on;
    };

    regen1: regen1 {
     /* VDD_3V3_ON */
     regulator-name = "regen1";
     regulator-boot-on;
     regulator-always-on;
    };

    regen2: regen2 {
     /* Needed for PMIC internal resource */
     regulator-name = "regen2";
     regulator-boot-on;
     regulator-always-on;
    };
   };
  };

  tps659038_rtc: tps659038_rtc {
   compatible = "ti,palmas-rtc";
   interrupt-parent = <&tps659038>;
   interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
   wakeup-source;
  };

  tps659038_pwr_button: tps659038_pwr_button {
   compatible = "ti,palmas-pwrbutton";
   interrupt-parent = <&tps659038>;
   interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
   wakeup-source;
   ti,palmas-long-press-seconds = <12>;
  };

  tps659038_gpio: tps659038_gpio {
   compatible = "ti,palmas-gpio";
   gpio-controller;
   #gpio-cells = <2>;
  };
 };

 /* STMPE811 touch screen controller */
 stmpe811@41 {
  compatible = "st,stmpe811";
  reg = <0x41>;
  interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
  interrupt-parent = <&gpio2>;
  id = <0>;
  blocks = <0x5>;
  irq-trigger = <0x1>;
  st,mod-12b = <1>; /* 12-bit ADC */
  st,ref-sel = <0>; /* internal ADC reference */
  st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
  st,sample-time = <4>; /* ADC converstion time: 80 clocks */

  stmpe_adc {
   compatible = "st,stmpe-adc";
   st,norequest-mask = <0x00>; /* mask any channels to be used by touchscreen */
   adc0: iio-device@0 {
    #io-channel-cells = <1>;
    iio-channels = <&adc0 4>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>;
    iio-channel-names = "AIN0_P9_39", "AIN1_P9_40", "AIN2_P9_37", "AIN3_P9_38",
     "AIN4_P9_33", "AIN5_P9_36", "AIN6_P9_35";
   };
  };

  stmpe_touchscreen {
   status = "disabled";
   compatible = "st,stmpe-ts";
   /* 8 sample average control */
   st,ave-ctrl = <3>;
   /* 7 length fractional part in z */
   st,fraction-z = <7>;
   /*
    * 50 mA typical 80 mA max touchscreen drivers
    * current limit value
    */
   st,i-drive = <1>;
   /* 1 ms panel driver settling time */
   st,settling = <3>;
   /* 5 ms touch detect interrupt delay */
   st,touch-det-delay = <5>;
  };

  stmpe_gpio {
   compatible = "st,stmpe-gpio";
  };

  stmpe_pwm {
   compatible = "st,stmpe-pwm";
   #pwm-cells = <2>;
  };
 };
};

&mcspi3 {
 status = "okay";
 ti,pindir-d0-out-d1-in;

 sn65hvs882: sn65hvs882@0 {
  compatible = "pisosr-gpio";
  gpio-controller;
  #gpio-cells = <2>;

  reg = <0>;
  spi-max-frequency = <1000000>;
  spi-cpol;
 };
};

&cpu0 {
 vdd-supply = <&vdd_mpu>;
 voltage-tolerance = <1>;
};

&uart1 {
 status = "okay";
};

&davinci_mdio_sw {
 reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 reset-delay-us = <2>;

 phy0: ethernet-phy@4 {
  reg = <4>;
  eee-broken-100tx;
  eee-broken-1000t;
 };
};

&mac_sw {
 status = "okay";
};

&cpsw_port1 {
 phy-handle = <&phy0>;
 phy-mode = "rgmii-rxid";
 ti,dual-emac-pvid = <1>;
};

&cpsw_port2 {
 status = "disabled";
};

&ocp {
 pruss1_shmem: pruss_shmem@4b200000 {
  status = "okay";
  compatible = "ti,pruss-shmem";
  reg = <0x4b200000 0x020000>;
 };

 pruss2_shmem: pruss_shmem@4b280000 {
  status = "okay";
  compatible = "ti,pruss-shmem";
  reg = <0x4b280000 0x020000>;
 };
};

&mmc1 {
 status = "okay";
 vmmc-supply = <&vdd_3v3>;
 vqmmc-supply = <&vdd_sd>;
 bus-width = <4>;
 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */

 pinctrl-names = "default";
 pinctrl-0 = <&mmc1_pins_default>;
};

&mmc2 {
 status = "okay";
 vmmc-supply = <&vdd_1v8>;
 vqmmc-supply = <&vdd_1v8>;
 bus-width = <8>;
 ti,non-removable;
 non-removable;
 mmc-pwrseq = <&emmc_pwrseq>;

 ti,needs-special-reset;
 dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
 dma-names = "tx", "rx";

};

&mmc4 {
 /* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */
 /* HS: High speed up to 50 MHz (3.3 V signaling). */
 /* SDR12: SDR up to 25 MHz (1.8 V signaling). */
 /* SDR25: SDR up to 50 MHz (1.8 V signaling). */
 /* SDR50: SDR up to 100 MHz (1.8 V signaling). */
 /* SDR104: SDR up to 208 MHz (1.8 V signaling) */
 /* DDR50: DDR up to 50 MHz (1.8 V signaling). */
 status = "okay";

 ti,needs-special-reset;
 vmmc-supply = <&vdd_3v3>;
 cap-power-off-card;
 keep-power-in-suspend;
 bus-width = <4>;
 ti,non-removable;
 non-removable;
 no-1-8-v;
 max-frequency = <24000000>;

 #address-cells = <1>;
 #size-cells = <0>;
 mmc-pwrseq = <&brcmf_pwrseq>;

 brcmf: wifi@1 {
  status = "okay";
  reg = <1>;
  compatible = "brcm,bcm4329-fmac";

  brcm,sd-head-align = <4>;
  brcm,sd_head_align = <4>;
  brcm,sd_sgentry_align = <512>;

  interrupt-parent = <&gpio3>;
  interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
  interrupt-names = "host-wake";
 };
};

&usb2_phy1 {
 phy-supply = <&ldousb_reg>;
};

&usb2_phy2 {
 phy-supply = <&ldousb_reg>;
};

&usb1 {
 status = "okay";
 dr_mode = "otg";
};

&omap_dwc3_1 {
 extcon = <&extcon_usb1>;
};

&usb2 {
 status = "okay";
 dr_mode = "host";
};

&dss {
 status = "okay";
 vdda_video-supply = <&vdd_1v8_pll>;
};

&hdmi {
 status = "okay";
 vdda-supply = <&vdd_1v8_phy_ldo4>;

 port {
  hdmi_out: endpoint {
   remote-endpoint = <&hdmi_encoder_in>;
  };
 };
};

&bandgap {
 status = "okay";
};

&cpu_alert0 {
 temperature = <55000>; /* milliCelsius */
};

&cpu_crit {
 temperature = <85000>; /* milliCelsius */
};

&gpu_crit {
 temperature = <85000>; /* milliCelsius */
};

&core_crit {
 temperature = <85000>; /* milliCelsius */
};

&dspeve_crit {
 temperature = <85000>; /* milliCelsius */
};

&iva_crit {
 temperature = <85000>; /* milliCelsius */
};

&sata {
 status = "disabled";
};

&sata_phy {
 status = "disabled";
};

/* bluetooth */
&uart6 {
 status = "okay";
};

/* cape header stuff */
&i2c4 {
 status = "okay";
 clock-frequency = <100000>;
};

&ipu2 {
 status = "okay";
 memory-region = <&ipu2_memory_region>;
};

&ipu1 {
 status = "okay";
 memory-region = <&ipu1_memory_region>;
};

&dsp1 {
 status = "okay";
 memory-region = <&dsp1_memory_region>;
};

&dsp2 {
 status = "okay";
 memory-region = <&dsp2_memory_region>;
};

[ Dauer der Verarbeitung: 0.5 Sekunden  (vorverarbeitet)  ]