// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Freescale LS2080A QDS Board.
*
* Copyright 2016 Freescale Semiconductor, Inc.
* Copyright 2017 NXP
*
* Abhimanyu Saini <abhimanyu.saini@nxp.com>
*
*/
/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
&dpmac9 {
phy-handle = <&mdio0_phy12>;
phy-connection-type = "sgmii";
};
&dpmac10 {
phy-handle = <&mdio0_phy13>;
phy-connection-type = "sgmii";
};
&dpmac11 {
phy-handle = <&mdio0_phy14>;
phy-connection-type = "sgmii";
};
&dpmac12 {
phy-handle = <&mdio0_phy15>;
phy-connection-type = "sgmii";
};
&esdhc {
mmc-hs200-1_8v;
status = "okay";
};
&ifc {
status = "okay";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0x0 0x0 0x5 0x80000000 0x08000000
0x2 0x0 0x5 0x30000000 0x00010000
0x3 0x0 0x5 0x20000000 0x00010000>;
flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@2,0 {
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
boardctrl: board-control@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ls208xaqds-fpga", "fsl,fpga-qixis", "simple-mfd";
reg = <3 0 0x1000>;
ranges = <0 3 0 0x1000>;
mdio-mux@54 {
compatible = "mdio-mux-mmioreg", "mdio-mux";
mdio-parent-bus = <&emdio1>;
reg = <0x54 1>; /* BRDCFG4 */
mux-mask = <0xe0>; /* EMI1_MDIO */
#address-cells = <1>;
#size-cells = <0>;
/* Child MDIO buses, one for each riser card:
* reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
* VSC8234 PHYs on the riser cards.
*/
mdio_mux3: mdio@60 {
reg = <0x60>;
#address-cells = <1>;
#size-cells = <0>;
mdio0_phy12: mdio-phy0@1c {
reg = <0x1c>;
};
mdio0_phy13: mdio-phy1@1d {
reg = <0x1d>;
};
mdio0_phy14: mdio-phy2@1e {
reg = <0x1e>;
};
mdio0_phy15: mdio-phy3@1f {
reg = <0x1f>;
};
};
};
};
};
&i2c0 {
status = "okay";
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x00>;
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x02>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <500>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
adt7481@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
};
};
};
&i2c1 {
status = "disabled";
};
&i2c2 {
status = "disabled";
};
&i2c3 {
status = "disabled";
};
&dspi {
status = "okay";
dflash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <0>;
};
dflash1: flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <1>;
};
dflash2: flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <2>;
};
};
&qspi {
status = "okay";
flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <20000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
reg = <0>;
};
flash2: flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <20000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
reg = <2>;
};
};
&sata0 {
status = "okay";
};
&sata1 {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
