Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/arch/arm64/boot/dts/rockchip/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 7 kB image not shown  

Quelle  rk3368-orion-r68-meta.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com>
 */

/dts-v1/;
#include <dt-bindings/input/input.h>
#include "rk3368.dtsi"

/ {
 model = "Rockchip Orion R68";
 compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368";

 aliases {
  ethernet0 = &gmac;
  mmc0 = &sdmmc;
  mmc1 = &emmc;
 };

 chosen {
  stdout-path = "serial2:115200n8";
 };

 memory@0 {
  device_type = "memory";
  reg = <0x0 0x0 0x0 0x80000000>;
 };

 emmc_pwrseq: emmc-pwrseq {
  compatible = "mmc-pwrseq-emmc";
  pinctrl-0 = <&emmc_reset>;
  pinctrl-names = "default";
  reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
 };

 ext_gmac: external-gmac-clock {
  compatible = "fixed-clock";
  #clock-cells = <0>;
  clock-frequency = <125000000>;
  clock-output-names = "ext_gmac";
 };

 keys: gpio-keys {
  compatible = "gpio-keys";
  pinctrl-names = "default";
  pinctrl-0 = <&pwr_key>;

  key-power {
   wakeup-source;
   gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
   label = "GPIO Power";
   linux,code = <KEY_POWER>;
  };
 };

 leds: gpio-leds {
  compatible = "gpio-leds";

  red_led: led-0 {
   gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
   label = "orion:red:led";
   pinctrl-names = "default";
   pinctrl-0 = <&led_ctl>;
   default-state = "on";
  };

  blue_led: led-1 {
   gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
   label = "orion:blue:led";
   pinctrl-names = "default";
   pinctrl-0 = <&stby_pwren>;
   default-state = "off";
  };
 };

 vcc_18: regulator-vcc18 {
  compatible = "regulator-fixed";
  regulator-name = "vcc_18";
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;
  regulator-always-on;
  regulator-boot-on;
  vin-supply = <&vcc_sys>;
 };

 /* supplies both host and otg */
 vcc_host: regulator-vcc-host {
  compatible = "regulator-fixed";
  gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
  pinctrl-names = "default";
  pinctrl-0 = <&host_vbus_drv>;
  regulator-name = "vcc_host";
  regulator-always-on;
  regulator-boot-on;
  vin-supply = <&vcc_sys>;
 };

 vcc_io: regulator-vcc-io {
  compatible = "regulator-fixed";
  regulator-name = "vcc_io";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  regulator-always-on;
  regulator-boot-on;
  vin-supply = <&vcc_sys>;
 };

 vcc_lan: regulator-vcc-lan {
  compatible = "regulator-fixed";
  regulator-name = "vcc_lan";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  regulator-always-on;
  regulator-boot-on;
  vin-supply = <&vcc_io>;
 };

 vcc_sd: regulator-vcc-sd {
  compatible = "regulator-fixed";
  regulator-name = "vcc_sd";
  gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&vcc_io>;
 };

 vcc_sys: regulator-vcc-sys {
  compatible = "regulator-fixed";
  regulator-name = "vcc_sys";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  regulator-always-on;
  regulator-boot-on;
 };

 vccio_sd: regulator-vcc-io-sd {
  compatible = "regulator-fixed";
  regulator-name = "vccio_sd";
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <3300000>;
  regulator-always-on;
  regulator-boot-on;
  vin-supply = <&vcc_io>;
 };

 vccio_wl: regulator-vccio-wl {
  compatible = "regulator-fixed";
  regulator-name = "vccio_wl";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  regulator-always-on;
  regulator-boot-on;
  vin-supply = <&vcc_io>;
 };

 vdd_10: regulator-vdd-10 {
  compatible = "regulator-fixed";
  regulator-name = "vdd_10";
  regulator-min-microvolt = <1000000>;
  regulator-max-microvolt = <1000000>;
  regulator-always-on;
  regulator-boot-on;
  vin-supply = <&vcc_sys>;
 };
};

&emmc {
 bus-width = <8>;
 cap-mmc-highspeed;
 mmc-pwrseq = <&emmc_pwrseq>;
 mmc-hs200-1_2v;
 mmc-hs200-1_8v;
 non-removable;
 pinctrl-names = "default";
 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
 status = "okay";
};

&gmac {
 assigned-clocks = <&cru SCLK_MAC>;
 assigned-clock-parents = <&ext_gmac>;
 clock_in_out = "input";
 phy-supply = <&vcc_lan>;
 phy-mode = "rgmii";
 pinctrl-names = "default";
 pinctrl-0 = <&rgmii_pins>;
 snps,reset-gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
 snps,reset-active-low;
 snps,reset-delays-us = <0 10000 1000000>;
 tx_delay = <0x30>;
 rx_delay = <0x10>;
 status = "okay";
};

&i2c0 {
 status = "okay";

 vdd_cpu: syr827@40 {
  compatible = "silergy,syr827";
  reg = <0x40>;
  fcs,suspend-voltage-selector = <1>;
  regulator-name = "vdd_cpu";
  regulator-enable-ramp-delay = <300>;
  regulator-min-microvolt = <712500>;
  regulator-max-microvolt = <1500000>;
  regulator-ramp-delay = <8000>;
  regulator-always-on;
  regulator-boot-on;
  vin-supply = <&vcc_sys>;
 };

 hym8563: rtc@51 {
  compatible = "haoyu,hym8563";
  reg = <0x51>;
  #clock-cells = <0>;
  clock-output-names = "xin32k";
  /* rtc_int is not connected */
 };
};

&pinctrl {
 pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
  bias-disable;
  drive-strength = <8>;
 };

 pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
  bias-pull-up;
  drive-strength = <8>;
 };

 emmc {
  emmc_bus8: emmc-bus8 {
   rockchip,pins = <1 RK_PC2 2 &pcfg_pull_up_drv_8ma>,
     <1 RK_PC3 2 &pcfg_pull_up_drv_8ma>,
     <1 RK_PC4 2 &pcfg_pull_up_drv_8ma>,
     <1 RK_PC5 2 &pcfg_pull_up_drv_8ma>,
     <1 RK_PC6 2 &pcfg_pull_up_drv_8ma>,
     <1 RK_PC7 2 &pcfg_pull_up_drv_8ma>,
     <1 RK_PD0 2 &pcfg_pull_up_drv_8ma>,
     <1 RK_PD1 2 &pcfg_pull_up_drv_8ma>;
  };

  emmc-clk {
   rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none_drv_8ma>;
  };

  emmc-cmd {
   rockchip,pins = <1 RK_PD2 2 &pcfg_pull_up_drv_8ma>;
  };

  emmc_reset: emmc-reset {
   rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 keys {
  pwr_key: pwr-key {
   rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_down>;
  };
 };

 leds {
  stby_pwren: stby-pwren {
   rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  led_ctl: led-ctl {
   rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 sdmmc {
  sdmmc_clk: sdmmc-clk {
   rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none_drv_8ma>;
  };

  sdmmc_cmd: sdmmc-cmd {
   rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up_drv_8ma>;
  };

  sdmmc_cd: sdmmc-cd {
   rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up_drv_8ma>;
  };

  sdmmc_bus1: sdmmc-bus1 {
   rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>;
  };

  sdmmc_bus4: sdmmc-bus4 {
   rockchip,pins = <2 RK_PA5 1 &pcfg_pull_up_drv_8ma>,
     <2 RK_PA6 1 &pcfg_pull_up_drv_8ma>,
     <2 RK_PA7 1 &pcfg_pull_up_drv_8ma>,
     <2 RK_PB0 1 &pcfg_pull_up_drv_8ma>;
  };
 };

 usb {
  host_vbus_drv: host-vbus-drv {
   rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };
};

&saradc {
 vref-supply = <&vcc_18>;
 status = "okay";
};

&sdmmc {
 bus-width = <4>;
 clock-frequency = <50000000>;
 max-frequency = <50000000>;
 cap-sd-highspeed;
 card-detect-delay = <200>;
 pinctrl-names = "default";
 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 vmmc-supply = <&vcc_sd>;
 vqmmc-supply = <&vccio_sd>;
 status = "okay";
};

&uart2 {
 status = "okay";
};

&uart4 {
 pinctrl-names = "default";
 pinctrl-0 = <&uart4_xfer>;
 status = "okay";
};

&usb_host0_ehci {
 status = "okay";
};

&usb_otg {
 status = "okay";
};

&wdt {
 status = "okay";
};

[ Dauer der Verarbeitung: 0.4 Sekunden  (vorverarbeitet)  ]