Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/arch/arm64/boot/dts/socionext/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 2 kB image not shown  

Quelle  uniphier-ld20-akebi96.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0+ OR MIT
//
// Device Tree Source for Akebi96 Development Board
//
// Derived from uniphier-ld20-global.dts.
//
// Copyright (C) 2015-2017 Socionext Inc.
// Copyright (C) 2019-2020 Linaro Ltd.

/dts-v1/;
#include <dt-bindings/gpio/uniphier-gpio.h>
#include "uniphier-ld20.dtsi"

/ {
 model = "Akebi96";
 compatible = "socionext,uniphier-ld20-akebi96",
       "socionext,uniphier-ld20";

 chosen {
  stdout-path = "serial0:115200n8";
 };

 aliases {
  serial0 = &serial0;
  serial1 = &serial1;
  serial2 = &serial2;
  serial3 = &serial3;
  i2c0 = &i2c0;
  i2c1 = &i2c1;
  i2c2 = &i2c2;
  i2c3 = &i2c3;
  i2c4 = &i2c4;
  i2c5 = &i2c5;
  spi0 = &spi0;
  spi1 = &spi1;
  spi2 = &spi2;
  spi3 = &spi3;
  ethernet0 = ð
 };

 memory@80000000 {
  device_type = "memory";
  reg = <0 0x80000000 0 0xc0000000>;
 };

 framebuffer@c0000000 {
  compatible = "simple-framebuffer";
  reg = <0 0xc0000000 0 0x02000000>;
  width = <1920>;
  height = <1080>;
  stride = <7680>;
  format = "a8r8g8b8";
 };

 reserved-memory {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;

  memory@c0000000 {
   reg = <0 0xc0000000 0 0x02000000>;
   no-map;
  };
 };

 sound {
  compatible = "audio-graph-card";
  label = "UniPhier LD20";
  dais = <&spdif_port0
   &comp_spdif_port0>;
 };

 spdif-out {
  compatible = "linux,spdif-dit";
  #sound-dai-cells = <0>;

  port@0 {
   spdif_tx: endpoint {
    remote-endpoint = <&spdif_hiecout1>;
   };
  };
 };

 comp-spdif-out {
  compatible = "linux,spdif-dit";
  #sound-dai-cells = <0>;

  port@0 {
   comp_spdif_tx: endpoint {
    remote-endpoint = <&comp_spdif_hiecout1>;
   };
  };
 };

 firmware {
  optee {
   compatible = "linaro,optee-tz";
   method = "smc";
  };
 };
};

&spi3 {
 status = "okay";
 #address-cells = <1>;
 #size-cells = <0>;
 usb-over-spi@0 {
  compatible = "maxim,max3421-udc";
  reg = <0>;
  spi-max-frequency = <12500000>;
  interrupt-parent = <&gpio>;
  interrupt-names = "udc";
  interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 };
};

&serial0 {
 /* Onboard USB-UART */
 status = "okay";
};

&serial2 {
 /* LS connector UART1 */
 status = "okay";
};

&serial3 {
 /* LS connector UART0 */
 status = "okay";
};

&spdif_hiecout1 {
 remote-endpoint = <&spdif_tx>;
};

&comp_spdif_hiecout1 {
 remote-endpoint = <&comp_spdif_tx>;
};

&i2c0 {
 /* LS connector I2C0 */
 status = "okay";
};

&i2c1 {
 /* LS connector I2C1 */
 status = "okay";
};

ð {
 status = "okay";
 phy-handle = <ðphy>;
};

&mdio {
 ethphy: ethernet-phy@0 {
  reg = <0>;
 };
};

&usb {
 status = "okay";
};

&pcie {
 status = "okay";
};

&gpio {
 /* IRQs for Max3421 */
 xirq0-hog {
  gpio-hog;
  gpios = <UNIPHIER_GPIO_IRQ(0) 1>;
  input;
 };
 xirq10-hog {
  gpio-hog;
  gpios = <UNIPHIER_GPIO_IRQ(10) 1>;
  input;
 };
};

&pinctrl_aout1 {
 groups = "aout1b";
};

&pinctrl_uart3 {
 groups = "uart3", "uart3_ctsrts";
};

[ Dauer der Verarbeitung: 0.4 Sekunden  (vorverarbeitet)  ]