if (rela) {
*location = (*location & 0xffff0000) |
((((longlong) v + 0x8000LL) >> 16) & 0xffff); return 0;
}
/* * We cannot relocate this one now because we don't know the value of * the carry we need to add. Save the information, and let LO16 do the * actual relocation.
*/
n = kmalloc(sizeof *n, GFP_KERNEL); if (!n) return -ENOMEM;
if (rela) {
*location = (*location & 0xffff0000) | (v & 0xffff); return 0;
}
/* Sign extend the addend we extract from the lo insn. */
vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
if (me->arch.r_mips_hi16_list != NULL) {
l = me->arch.r_mips_hi16_list; while (l != NULL) { struct mips_hi16 *next; unsignedlong insn;
/* * The value for the HI16 had best be the same.
*/ if (v != l->value) goto out_danger;
/* * Do the HI16 relocation. Note that we actually don't * need to know anything about the LO16 itself, except * where to find the low 16 bits of the addend needed * by the LO16.
*/
insn = *l->addr;
val = ((insn & 0xffff) << 16) + vallo;
val += v;
/* * Account for the sign extension that will happen in * the low bits.
*/
val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
insn = (insn & ~0xffff) | val;
*l->addr = insn;
next = l->next;
kfree(l);
l = next;
}
me->arch.r_mips_hi16_list = NULL;
}
/* * Ok, we're done with the HI16 relocs. Now deal with the LO16.
*/
val = v + vallo;
insnlo = (insnlo & ~0xffff) | (val & 0xffff);
*location = insnlo;
/** * reloc_handler() - Apply a particular relocation to a module * @type: type of the relocation to apply * @me: the module to apply the reloc to * @location: the address at which the reloc is to be applied * @base: the existing value at location for REL-style; 0 for RELA-style * @v: the value of the reloc, with addend for RELA-style * @rela: indication of is this a RELA (true) or REL (false) relocation * * Each implemented relocation function applies a particular type of * relocation to the module @me. Relocs that may be found in either REL or RELA * variants can be handled by making use of the @base & @v parameters which are * set to values which abstract the difference away from the particular reloc * implementations. * * Return: 0 upon success, else -ERRNO
*/ staticint reloc_handler(u32 type, struct module *me, u32 *location, u32 base,
Elf_Addr v, bool rela)
{ switch (type) { case R_MIPS_NONE: break; case R_MIPS_32:
apply_r_mips_32(location, base, v); break; case R_MIPS_26: return apply_r_mips_26(me, location, base, v); case R_MIPS_HI16: return apply_r_mips_hi16(me, location, v, rela); case R_MIPS_LO16: return apply_r_mips_lo16(me, location, base, v, rela); case R_MIPS_PC16: return apply_r_mips_pc16(me, location, base, v); case R_MIPS_PC21_S2: return apply_r_mips_pc21(me, location, base, v); case R_MIPS_PC26_S2: return apply_r_mips_pc26(me, location, base, v); case R_MIPS_64: return apply_r_mips_64(location, v, rela); case R_MIPS_HIGHER: return apply_r_mips_higher(location, v, rela); case R_MIPS_HIGHEST: return apply_r_mips_highest(location, v, rela); default:
pr_err("%s: Unknown relocation type %u\n", me->name, type); return -EINVAL;
}
pr_debug("Applying relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
r.rel = (void *)sechdrs[relsec].sh_addr;
reloc_sz = rela ? sizeof(*r.rela) : sizeof(*r.rel);
me->arch.r_mips_hi16_list = NULL; for (i = 0; i < sechdrs[relsec].sh_size / reloc_sz; i++) { /* This is where to make the change */
location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ r.rel->r_offset; /* This is the symbol it is referring to */
sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ ELF_MIPS_R_SYM(*r.rel); if (sym->st_value >= -MAX_ERRNO) { /* Ignore unresolved weak symbol */ if (ELF_ST_BIND(sym->st_info) == STB_WEAK) continue;
pr_warn("%s: Unknown symbol %s\n",
me->name, strtab + sym->st_name);
err = -ENOENT; goto out;
}
type = ELF_MIPS_R_TYPE(*r.rel);
if (rela) {
v = sym->st_value + r.rela->r_addend;
base = 0;
r.rela = &r.rela[1];
} else {
v = sym->st_value;
base = *location;
r.rel = &r.rel[1];
}
out: /* * Normally the hi16 list should be deallocated at this point. A * malformed binary however could contain a series of R_MIPS_HI16 * relocations not followed by a R_MIPS_LO16 relocation, or if we hit * an error processing a reloc we might have gotten here before * reaching the R_MIPS_LO16. In either case, free up the list and * return an error.
*/ if (me->arch.r_mips_hi16_list) {
free_relocation_chain(me->arch.r_mips_hi16_list);
me->arch.r_mips_hi16_list = NULL;
err = err ?: -ENOEXEC;
}
/* Given an address, look for it in the module exception tables. */ conststruct exception_table_entry *search_module_dbetables(unsignedlong addr)
{ unsignedlong flags; conststruct exception_table_entry *e = NULL; struct mod_arch_specific *dbe;
spin_lock_irqsave(&dbe_lock, flags);
list_for_each_entry(dbe, &dbe_list, dbe_list) {
e = search_extable(dbe->dbe_start,
dbe->dbe_end - dbe->dbe_start, addr); if (e) break;
}
spin_unlock_irqrestore(&dbe_lock, flags);
/* Now, if we found one, we are running inside it now, hence
we cannot unload the module, hence no refcnt needed. */ return e;
}
/* Put in dbe list if necessary. */ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me)
{ const Elf_Shdr *s; char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
if (IS_ENABLED(CONFIG_JUMP_LABEL))
jump_label_apply_nops(me);
INIT_LIST_HEAD(&me->arch.dbe_list); for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { if (strcmp("__dbe_table", secstrings + s->sh_name) != 0) continue;
me->arch.dbe_start = (void *)s->sh_addr;
me->arch.dbe_end = (void *)s->sh_addr + s->sh_size;
spin_lock_irq(&dbe_lock);
list_add(&me->arch.dbe_list, &dbe_list);
spin_unlock_irq(&dbe_lock);
} return 0;
}
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.