Quellcodebibliothek Statistik Leitseite products/sources/formale Sprachen/C/Linux/drivers/scsi/   (Open Source Betriebssystem Version 6.17.9©)  Datei vom 24.10.2025 mit Größe 4 kB image not shown  

Quelle  zorro7xx.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux.
 * Amiga MacroSystemUS WarpEngine SCSI controller.
 * Amiga Technologies/DKB A4091 SCSI controller.
 *
 * Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk>
 * plus modifications of the 53c7xx.c driver to support the Amiga.
 *
 * Rewritten to use 53c700.c by Kars de Jong <jongk@linux-m68k.org>
 */


#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/zorro.h>
#include <linux/slab.h>

#include <asm/amigahw.h>
#include <asm/amigaints.h>

#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_spi.h>

#include "53c700.h"

MODULE_AUTHOR("Alan Hourihane / Kars de Jong ");
MODULE_DESCRIPTION("Amiga Zorro NCR53C710 driver");
MODULE_LICENSE("GPL");


static struct scsi_host_template zorro7xx_scsi_driver_template = {
 .proc_name = "zorro7xx",
 .this_id = 7,
 .module  = THIS_MODULE,
};

static struct zorro_driver_data {
 const char *name;
 unsigned long offset;
 int absolute; /* offset is absolute address */
} zorro7xx_driver_data[] = {
 { .name = "PowerUP 603e+", .offset = 0xf40000, .absolute = 1 },
 { .name = "WarpEngine 40xx", .offset = 0x40000 },
 { .name = "A4091", .offset = 0x800000 },
 { .name = "GForce 040/060", .offset = 0x40000 },
 { 0 }
};

static struct zorro_device_id zorro7xx_zorro_tbl[] = {
 {
  .id = ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS,
  .driver_data = (unsigned long)&zorro7xx_driver_data[0],
 },
 {
  .id = ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx,
  .driver_data = (unsigned long)&zorro7xx_driver_data[1],
 },
 {
  .id = ZORRO_PROD_CBM_A4091_1,
  .driver_data = (unsigned long)&zorro7xx_driver_data[2],
 },
 {
  .id = ZORRO_PROD_CBM_A4091_2,
  .driver_data = (unsigned long)&zorro7xx_driver_data[2],
 },
 {
  .id = ZORRO_PROD_GVP_GFORCE_040_060,
  .driver_data = (unsigned long)&zorro7xx_driver_data[3],
 },
 { 0 }
};
MODULE_DEVICE_TABLE(zorro, zorro7xx_zorro_tbl);

static int zorro7xx_init_one(struct zorro_dev *z,
        const struct zorro_device_id *ent)
{
 struct Scsi_Host *host;
 struct NCR_700_Host_Parameters *hostdata;
 struct zorro_driver_data *zdd;
 unsigned long board, ioaddr;

 board = zorro_resource_start(z);
 zdd = (struct zorro_driver_data *)ent->driver_data;

 if (zdd->absolute) {
  ioaddr = zdd->offset;
 } else {
  ioaddr = board + zdd->offset;
 }

 if (!zorro_request_device(z, zdd->name)) {
  printk(KERN_ERR "zorro7xx: cannot reserve region 0x%lx, abort\n",
         board);
  return -EBUSY;
 }

 hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
 if (!hostdata) {
  printk(KERN_ERR "zorro7xx: Failed to allocate host data\n");
  goto out_release;
 }

 /* Fill in the required pieces of hostdata */
 if (ioaddr > 0x01000000)
  hostdata->base = ioremap(ioaddr, zorro_resource_len(z));
 else
  hostdata->base = ZTWO_VADDR(ioaddr);

 hostdata->clock = 50;
 hostdata->chip710 = 1;

 /* Settings for at least WarpEngine 40xx */
 hostdata->ctest7_extra = CTEST7_TT1;

 zorro7xx_scsi_driver_template.name = zdd->name;

 /* and register the chip */
 host = NCR_700_detect(&zorro7xx_scsi_driver_template, hostdata,
         &z->dev);
 if (!host) {
  printk(KERN_ERR "zorro7xx: No host detected; "
    "board configuration problem?\n");
  goto out_free;
 }

 host->this_id = 7;
 host->base = ioaddr;
 host->irq = IRQ_AMIGA_PORTS;

 if (request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "zorro7xx-scsi",
   host)) {
  printk(KERN_ERR "zorro7xx: request_irq failed\n");
  goto out_put_host;
 }

 zorro_set_drvdata(z, host);
 scsi_scan_host(host);

 return 0;

 out_put_host:
 scsi_host_put(host);
 out_free:
 if (ioaddr > 0x01000000)
  iounmap(hostdata->base);
 kfree(hostdata);
 out_release:
 zorro_release_device(z);

 return -ENODEV;
}

static void zorro7xx_remove_one(struct zorro_dev *z)
{
 struct Scsi_Host *host = zorro_get_drvdata(z);
 struct NCR_700_Host_Parameters *hostdata = shost_priv(host);

 scsi_remove_host(host);

 NCR_700_release(host);
 if (host->base > 0x01000000)
  iounmap(hostdata->base);
 kfree(hostdata);
 free_irq(host->irq, host);
 zorro_release_device(z);
}

static struct zorro_driver zorro7xx_driver = {
 .name   = "zorro7xx-scsi",
 .id_table = zorro7xx_zorro_tbl,
 .probe   = zorro7xx_init_one,
 .remove   = zorro7xx_remove_one,
};

static int __init zorro7xx_scsi_init(void)
{
 return zorro_register_driver(&zorro7xx_driver);
}

static void __exit zorro7xx_scsi_exit(void)
{
 zorro_unregister_driver(&zorro7xx_driver);
}

module_init(zorro7xx_scsi_init);
module_exit(zorro7xx_scsi_exit);

Messung V0.5
C=96 H=96 G=95

¤ Dauer der Verarbeitung: 0.10 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.