/* * If we're here then either node->length pointed past the end * of the buffer or we reached the end of the buffer without * finding a device path end node.
*/ returnfalse;
}
staticbool
validate_boot_order(efi_char16_t *var_name, int match, u8 *buffer, unsignedlong len)
{ /* An array of 16-bit integers */ if ((len % 2) != 0) returnfalse;
returntrue;
}
staticbool
validate_load_option(efi_char16_t *var_name, int match, u8 *buffer, unsignedlong len)
{
u16 filepathlength; int i, desclength = 0, namelen;
/* Either "Boot" or "Driver" followed by four digits of hex */ for (i = match; i < match+4; i++) { if (var_name[i] > 127 ||
hex_to_bin(var_name[i] & 0xff) < 0) returntrue;
}
/* Reject it if there's 4 digits of hex and then further content */ if (namelen > match + 4) returnfalse;
/* A valid entry must be at least 8 bytes */ if (len < 8) returnfalse;
filepathlength = buffer[4] | buffer[5] << 8;
/* * There's no stored length for the description, so it has to be * found by hand
*/
desclength = ucs2_strsize((efi_char16_t *)(buffer + 6), len - 6) + 2;
/* Each boot entry must have a descriptor */ if (!desclength) returnfalse;
/* * If the sum of the length of the description, the claimed filepath * length and the original header are greater than the length of the * variable, it's malformed
*/ if ((desclength + filepathlength + 6) > len) returnfalse;
/* * This is the list of variables we need to validate, as well as the * whitelist for what we think is safe not to default to immutable. * * If it has a validate() method that's not NULL, it'll go into the * validation routine. If not, it is assumed valid, but still used for * whitelisting. * * Note that it's sorted by {vendor,name}, but globbed names must come after * any other name with the same prefix.
*/ staticconststruct variable_validate variable_validate[] = {
{ EFI_GLOBAL_VARIABLE_GUID, "BootNext", validate_uint16 },
{ EFI_GLOBAL_VARIABLE_GUID, "BootOrder", validate_boot_order },
{ EFI_GLOBAL_VARIABLE_GUID, "Boot*", validate_load_option },
{ EFI_GLOBAL_VARIABLE_GUID, "DriverOrder", validate_boot_order },
{ EFI_GLOBAL_VARIABLE_GUID, "Driver*", validate_load_option },
{ EFI_GLOBAL_VARIABLE_GUID, "ConIn", validate_device_path },
{ EFI_GLOBAL_VARIABLE_GUID, "ConInDev", validate_device_path },
{ EFI_GLOBAL_VARIABLE_GUID, "ConOut", validate_device_path },
{ EFI_GLOBAL_VARIABLE_GUID, "ConOutDev", validate_device_path },
{ EFI_GLOBAL_VARIABLE_GUID, "ErrOut", validate_device_path },
{ EFI_GLOBAL_VARIABLE_GUID, "ErrOutDev", validate_device_path },
{ EFI_GLOBAL_VARIABLE_GUID, "Lang", validate_ascii_string },
{ EFI_GLOBAL_VARIABLE_GUID, "OsIndications", NULL },
{ EFI_GLOBAL_VARIABLE_GUID, "PlatformLang", validate_ascii_string },
{ EFI_GLOBAL_VARIABLE_GUID, "Timeout", validate_uint16 },
{ LINUX_EFI_CRASH_GUID, "*", NULL },
{ NULL_GUID, "", NULL },
};
/* * Check if @var_name matches the pattern given in @match_name. * * @var_name: an array of @len non-NUL characters. * @match_name: a NUL-terminated pattern string, optionally ending in "*". A * final "*" character matches any trailing characters @var_name, * including the case when there are none left in @var_name. * @match: on output, the number of non-wildcard characters in @match_name * that @var_name matches, regardless of the return value. * @return: whether @var_name fully matches @match_name.
*/ staticbool
variable_matches(constchar *var_name, size_t len, constchar *match_name, int *match)
{ for (*match = 0; ; (*match)++) { char c = match_name[*match];
switch (c) { case'*': /* Wildcard in @match_name means we've matched. */ returntrue;
case'\0': /* @match_name has ended. Has @var_name too? */ return (*match == len);
default: /* * We've reached a non-wildcard char in @match_name. * Continue only if there's an identical character in * @var_name.
*/ if (*match < len && c == var_name[*match]) continue; returnfalse;
}
}
}
char *
efivar_get_utf8name(const efi_char16_t *name16, efi_guid_t *vendor)
{ int len = ucs2_utf8size(name16); char *name;
/* name, plus '-', plus GUID, plus NUL*/
name = kmalloc(len + 1 + EFI_VARIABLE_GUID_LEN + 1, GFP_KERNEL); if (!name) return NULL;
ucs2_as_utf8(name, name16, len);
name[len] = '-';
efi_guid_to_str(vendor, name + len + 1);
name[len + EFI_VARIABLE_GUID_LEN+1] = '\0';
/* replace invalid slashes like kobject_set_name_vargs does for /sys/firmware/efi/vars. */
strreplace(name, '/', '!');
bool
efivar_variable_is_removable(efi_guid_t vendor, constchar *var_name,
size_t len)
{ int i; bool found = false; int match = 0;
/* * Check if our variable is in the validated variables list
*/ for (i = 0; variable_validate[i].name[0] != '\0'; i++) { if (efi_guidcmp(variable_validate[i].vendor, vendor)) continue;
if (variable_matches(var_name, len,
variable_validate[i].name, &match)) {
found = true; break;
}
}
/* * If it's in our list, it is removable.
*/ return found;
}
/* * Returns the size of variable_name, in bytes, including the * terminating NULL character, or variable_name_size if no NULL * character is found among the first variable_name_size bytes.
*/ staticunsignedlong var_name_strnsize(efi_char16_t *variable_name, unsignedlong variable_name_size)
{ unsignedlong len;
efi_char16_t c;
/* * The variable name is, by definition, a NULL-terminated * string, so make absolutely sure that variable_name_size is * the value we expect it to be. If not, return the real size.
*/ for (len = 2; len <= variable_name_size; len += sizeof(c)) {
c = variable_name[(len / sizeof(c)) - 1]; if (!c) break;
}
return min(len, variable_name_size);
}
/* * Print a warning when duplicate EFI variables are encountered and * disable the sysfs workqueue since the firmware is buggy.
*/ staticvoid dup_variable_bug(efi_char16_t *str16, efi_guid_t *vendor_guid, unsignedlong len16)
{
size_t i, len8 = len16 / sizeof(efi_char16_t); char *str8;
str8 = kzalloc(len8, GFP_KERNEL); if (!str8) return;
/** * efivar_init - build the initial list of EFI variables * @func: callback function to invoke for every variable * @data: function-specific data to pass to @func * @duplicate_check: fail if a duplicate variable is found * * Get every EFI variable from the firmware and invoke @func. @func * should populate the initial dentry and inode tree. * * Returns 0 on success, or a kernel error code on failure.
*/ int efivar_init(int (*func)(efi_char16_t *, efi_guid_t, unsignedlong, void *), void *data, bool duplicate_check)
{ unsignedlong variable_name_size = 512;
efi_char16_t *variable_name;
efi_status_t status;
efi_guid_t vendor_guid; int err = 0;
/* * A small set of old UEFI implementations reject sizes * above a certain threshold, the lowest seen in the wild * is 512.
*/
do {
variable_name_size = 512;
BUILD_BUG_ON(EFI_VAR_NAME_LEN < 512);
status = efivar_get_next_variable(&variable_name_size,
variable_name,
&vendor_guid); switch (status) { case EFI_SUCCESS:
variable_name_size = var_name_strnsize(variable_name,
variable_name_size);
/* * Some firmware implementations return the * same variable name on multiple calls to * get_next_variable(). Terminate the loop * immediately as there is no guarantee that * we'll ever see a different variable name, * and may end up looping here forever.
*/ if (duplicate_check &&
efivarfs_variable_is_present(variable_name,
&vendor_guid, data)) {
dup_variable_bug(variable_name, &vendor_guid,
variable_name_size);
status = EFI_NOT_FOUND;
} else {
err = func(variable_name, vendor_guid,
variable_name_size, data); if (err)
status = EFI_NOT_FOUND;
} break; case EFI_UNSUPPORTED:
err = -EOPNOTSUPP;
status = EFI_NOT_FOUND; break; case EFI_NOT_FOUND: break; case EFI_BUFFER_TOO_SMALL:
pr_warn("efivars: Variable name size exceeds maximum (%lu > 512)\n",
variable_name_size);
status = EFI_NOT_FOUND; break; default:
pr_warn("efivars: get_next_variable: status=%lx\n", status);
status = EFI_NOT_FOUND; break;
}
} while (status != EFI_NOT_FOUND);
efivar_unlock();
free:
kfree(variable_name);
return err;
}
/** * efivar_entry_delete - delete variable * @entry: entry containing variable to delete * * Delete the variable from the firmware. It is the caller's * responsibility to free @entry (by deleting the dentry/inode) once * we return. * * Returns 0 on success, -EINTR if we can't grab the semaphore, * converted EFI status code if set_variable() fails.
*/ int efivar_entry_delete(struct efivar_entry *entry)
{
efi_status_t status; int err;
err = efivar_lock(); if (err) return err;
status = efivar_set_variable_locked(entry->var.VariableName,
&entry->var.VendorGuid,
0, 0, NULL, false);
efivar_unlock(); if (!(status == EFI_SUCCESS || status == EFI_NOT_FOUND)) return efi_status_to_err(status);
return 0;
}
/** * efivar_entry_size - obtain the size of a variable * @entry: entry for this variable * @size: location to store the variable's size
*/ int efivar_entry_size(struct efivar_entry *entry, unsignedlong *size)
{
efi_status_t status; int err;
*size = 0;
err = efivar_lock(); if (err) return err;
status = efivar_get_variable(entry->var.VariableName,
&entry->var.VendorGuid, NULL, size, NULL);
efivar_unlock();
if (status != EFI_BUFFER_TOO_SMALL) return efi_status_to_err(status);
return 0;
}
/** * __efivar_entry_get - call get_variable() * @entry: read data for this variable * @attributes: variable attributes * @size: size of @data buffer * @data: buffer to store variable data * * The caller MUST call efivar_entry_iter_begin() and * efivar_entry_iter_end() before and after the invocation of this * function, respectively.
*/ int __efivar_entry_get(struct efivar_entry *entry, u32 *attributes, unsignedlong *size, void *data)
{
efi_status_t status;
status = efivar_get_variable(entry->var.VariableName,
&entry->var.VendorGuid,
attributes, size, data);
return efi_status_to_err(status);
}
/** * efivar_entry_get - call get_variable() * @entry: read data for this variable * @attributes: variable attributes * @size: size of @data buffer * @data: buffer to store variable data
*/ int efivar_entry_get(struct efivar_entry *entry, u32 *attributes, unsignedlong *size, void *data)
{ int err;
/** * efivar_entry_set_get_size - call set_variable() and get new size (atomic) * @entry: entry containing variable to set and get * @attributes: attributes of variable to be written * @size: size of data buffer * @data: buffer containing data to write * @set: did the set_variable() call succeed? * * This is a pretty special (complex) function. See efivarfs_file_write(). * * Atomically call set_variable() for @entry and if the call is * successful, return the new size of the variable from get_variable() * in @size. The success of set_variable() is indicated by @set. * * Returns 0 on success, -EINVAL if the variable data is invalid, * -ENOSPC if the firmware does not have enough available space, or a * converted EFI status code if either of set_variable() or * get_variable() fail. * * If the EFI variable does not exist when calling set_variable() * (EFI_NOT_FOUND).
*/ int efivar_entry_set_get_size(struct efivar_entry *entry, u32 attributes, unsignedlong *size, void *data, bool *set)
{
efi_char16_t *name = entry->var.VariableName;
efi_guid_t *vendor = &entry->var.VendorGuid;
efi_status_t status; int err;
*set = false;
if (efivar_validate(*vendor, name, data, *size) == false) return -EINVAL;
/* * The lock here protects the get_variable call and the * conditional set_variable call
*/
err = efivar_lock(); if (err) return err;
status = efivar_set_variable_locked(name, vendor, attributes, *size,
data, false); if (status != EFI_SUCCESS) {
err = efi_status_to_err(status); goto out;
}
*set = true;
/* * Writing to the variable may have caused a change in size (which * could either be an append or an overwrite), or the variable to be * deleted. Perform a GetVariable() so we can tell what actually * happened.
*/
*size = 0;
status = efivar_get_variable(entry->var.VariableName,
&entry->var.VendorGuid,
NULL, size, NULL);
efivar_unlock();
if (status && status != EFI_BUFFER_TOO_SMALL) return efi_status_to_err(status);
return 0;
out:
efivar_unlock(); return err;
}
Messung V0.5
¤ Dauer der Verarbeitung: 0.1 Sekunden
(vorverarbeitet)
¤
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.