/** * snd_pcm_substream_to_dma_direction - Get dma_transfer_direction for a PCM * substream * @substream: PCM substream * * Return: DMA transfer direction
*/ staticinlineenum dma_transfer_direction
snd_pcm_substream_to_dma_direction(conststruct snd_pcm_substream *substream)
{ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) return DMA_MEM_TO_DEV; else return DMA_DEV_TO_MEM;
}
int snd_hwparams_to_dma_slave_config(conststruct snd_pcm_substream *substream, conststruct snd_pcm_hw_params *params, struct dma_slave_config *slave_config); int snd_dmaengine_pcm_trigger(struct snd_pcm_substream *substream, int cmd);
snd_pcm_uframes_t snd_dmaengine_pcm_pointer(struct snd_pcm_substream *substream);
snd_pcm_uframes_t snd_dmaengine_pcm_pointer_no_residue(struct snd_pcm_substream *substream);
int snd_dmaengine_pcm_open(struct snd_pcm_substream *substream, struct dma_chan *chan); int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream); int snd_dmaengine_pcm_sync_stop(struct snd_pcm_substream *substream);
int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream);
/* * The DAI supports packed transfers, eg 2 16-bit samples in a 32-bit word. * If this flag is set the dmaengine driver won't put any restriction on * the supported sample formats and set the DMA transfer size to undefined. * The DAI driver is responsible to disable any unsupported formats in it's * configuration and catch corner cases that are not already handled in * the ALSA core.
*/ #define SND_DMAENGINE_PCM_DAI_FLAG_PACK BIT(0)
/** * struct snd_dmaengine_dai_dma_data - DAI DMA configuration data * @addr: Address of the DAI data source or destination register. * @addr_width: Width of the DAI data source or destination register. * @maxburst: Maximum number of words(note: words, as in units of the * src_addr_width member, not bytes) that can be send to or received from the * DAI in one burst. * @filter_data: Custom DMA channel filter data, this will usually be used when * requesting the DMA channel. * @chan_name: Custom channel name to use when requesting DMA channel. * @fifo_size: FIFO size of the DAI controller in bytes * @flags: PCM_DAI flags, only SND_DMAENGINE_PCM_DAI_FLAG_PACK for now * @peripheral_config: peripheral configuration for programming peripheral * for dmaengine transfer * @peripheral_size: peripheral configuration buffer size
*/ struct snd_dmaengine_dai_dma_data {
dma_addr_t addr; enum dma_slave_buswidth addr_width;
u32 maxburst; void *filter_data; constchar *chan_name; unsignedint fifo_size; unsignedint flags; void *peripheral_config;
size_t peripheral_size;
};
/* * Try to request the DMA channel using compat_request_channel or * compat_filter_fn if it couldn't be requested through devicetree.
*/ #define SND_DMAENGINE_PCM_FLAG_COMPAT BIT(0) /* * Don't try to request the DMA channels through devicetree. This flag only * makes sense if SND_DMAENGINE_PCM_FLAG_COMPAT is set as well.
*/ #define SND_DMAENGINE_PCM_FLAG_NO_DT BIT(1) /* * The PCM is half duplex and the DMA channel is shared between capture and * playback.
*/ #define SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX BIT(3)
/** * struct snd_dmaengine_pcm_config - Configuration data for dmaengine based PCM * @prepare_slave_config: Callback used to fill in the DMA slave_config for a * PCM substream. Will be called from the PCM drivers hwparams callback. * @compat_request_channel: Callback to request a DMA channel for platforms * which do not use devicetree. * @process: Callback used to apply processing on samples transferred from/to * user space. * @name: Component name. If null, dev_name will be used. * @compat_filter_fn: Will be used as the filter function when requesting a * channel for platforms which do not use devicetree. The filter parameter * will be the DAI's DMA data. * @dma_dev: If set, request DMA channel on this device rather than the DAI * device. * @chan_names: If set, these custom DMA channel names will be requested at * registration time. * @pcm_hardware: snd_pcm_hardware struct to be used for the PCM. * @prealloc_buffer_size: Size of the preallocated audio buffer. * * Note: If both compat_request_channel and compat_filter_fn are set * compat_request_channel will be used to request the channel and * compat_filter_fn will be ignored. Otherwise the channel will be requested * using dma_request_channel with compat_filter_fn as the filter function.
*/ struct snd_dmaengine_pcm_config { int (*prepare_slave_config)(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct dma_slave_config *slave_config); struct dma_chan *(*compat_request_channel)( struct snd_soc_pcm_runtime *rtd, struct snd_pcm_substream *substream); int (*process)(struct snd_pcm_substream *substream, int channel, unsignedlong hwoff, unsignedlong bytes); constchar *name;
dma_filter_fn compat_filter_fn; struct device *dma_dev; constchar *chan_names[SNDRV_PCM_STREAM_LAST + 1];
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.