Haftungsausschluß.json KontaktUnknown {[0] [0] [0]}diese Dinge liegen außhalb unserer Verantwortung
[
{
"BriefDescription": "LLC prefetch misses for code reads. Derived from unc_c_tor_inserts.miss_opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_MISSES.CODE_LLC_PREFETCH",
"Filter": "filter_opc=0x191",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"ScaleUnit": "64Bytes",
"UMask": "0x3",
"Unit": "CBOX"
},
{
"BriefDescription": "LLC prefetch misses for data reads. Derived from unc_c_tor_inserts.miss_opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_MISSES.DATA_LLC_PREFETCH",
"Filter": "filter_opc=0x192",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"ScaleUnit": "64Bytes",
"UMask": "0x3",
"Unit": "CBOX"
},
{
"BriefDescription": "LLC misses - demand and prefetch data reads - excludes LLC prefetches. Derived from unc_c_tor_inserts.miss_opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_MISSES.DATA_READ",
"Filter": "filter_opc=0x182",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"ScaleUnit": "64Bytes",
"UMask": "0x3",
"Unit": "CBOX"
},
{
"BriefDescription": "MMIO reads. Derived from unc_c_tor_inserts.miss_opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_MISSES.MMIO_READ",
"Filter": "filter_opc=0x187,filter_nc=1",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"ScaleUnit": "64Bytes",
"UMask": "0x3",
"Unit": "CBOX"
},
{
"BriefDescription": "MMIO writes. Derived from unc_c_tor_inserts.miss_opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_MISSES.MMIO_WRITE",
"Filter": "filter_opc=0x18f,filter_nc=1",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"ScaleUnit": "64Bytes",
"UMask": "0x3",
"Unit": "CBOX"
},
{
"BriefDescription": "PCIe write misses (full cache line). Derived from unc_c_tor_inserts.miss_opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_MISSES.PCIE_NON_SNOOP_WRITE",
"Filter": "filter_opc=0x1c8,filter_tid=0x3e",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"ScaleUnit": "64Bytes",
"UMask": "0x3",
"Unit": "CBOX"
},
{
"BriefDescription": "LLC misses for PCIe read current. Derived from unc_c_tor_inserts.miss_opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_MISSES.PCIE_READ",
"Filter": "filter_opc=0x19e",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"ScaleUnit": "64Bytes",
"UMask": "0x3",
"Unit": "CBOX"
},
{
"BriefDescription": "ItoM write misses (as part of fast string memcpy stores) + PCIe full line writes. Derived from unc_c_tor_inserts.miss_opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_MISSES.PCIE_WRITE",
"Filter": "filter_opc=0x1c8",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"ScaleUnit": "64Bytes",
"UMask": "0x3",
"Unit": "CBOX"
},
{
"BriefDescription": "LLC prefetch misses for RFO. Derived from unc_c_tor_inserts.miss_opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_MISSES.RFO_LLC_PREFETCH",
"Filter": "filter_opc=0x190",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"ScaleUnit": "64Bytes",
"UMask": "0x3",
"Unit": "CBOX"
},
{
"BriefDescription": "LLC misses - Uncacheable reads (from cpu) . Derived from unc_c_tor_inserts.miss_opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_MISSES.UNCACHEABLE",
"Filter": "filter_opc=0x187",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"ScaleUnit": "64Bytes",
"UMask": "0x3",
"Unit": "CBOX"
},
{
"BriefDescription": "L2 demand and L2 prefetch code references to LLC. Derived from unc_c_tor_inserts.opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_REFERENCES.CODE_LLC_PREFETCH",
"Filter": "filter_opc=0x181",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
"ScaleUnit": "64Bytes",
"UMask": "0x1",
"Unit": "CBOX"
},
{
"BriefDescription": "PCIe writes (partial cache line). Derived from unc_c_tor_inserts.opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_REFERENCES.PCIE_NS_PARTIAL_WRITE",
"Filter": "filter_opc=0x180,filter_tid=0x3e",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
"UMask": "0x1",
"Unit": "CBOX"
},
{
"BriefDescription": "PCIe read current. Derived from unc_c_tor_inserts.opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_REFERENCES.PCIE_READ",
"Filter": "filter_opc=0x19e",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
"ScaleUnit": "64Bytes",
"UMask": "0x1",
"Unit": "CBOX"
},
{
"BriefDescription": "PCIe write references (full cache line). Derived from unc_c_tor_inserts.opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_REFERENCES.PCIE_WRITE",
"Filter": "filter_opc=0x1c8,filter_tid=0x3e",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
"ScaleUnit": "64Bytes",
"UMask": "0x1",
"Unit": "CBOX"
},
{
"BriefDescription": "Streaming stores (full cache line). Derived from unc_c_tor_inserts.opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_REFERENCES.STREAMING_FULL",
"Filter": "filter_opc=0x18c",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
"ScaleUnit": "64Bytes",
"UMask": "0x1",
"Unit": "CBOX"
},
{
"BriefDescription": "Streaming stores (partial cache line). Derived from unc_c_tor_inserts.opcode",
"Counter": "0,1,2,3",
"EventCode": "0x35",
"EventName": "LLC_REFERENCES.STREAMING_PARTIAL",
"Filter": "filter_opc=0x18d",
"PerPkg": "1",
"PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
"ScaleUnit": "64Bytes",
"UMask": "0x1",
"Unit": "CBOX"
},
{
"BriefDescription": "Bounce Control",
"Counter": "0,1,2,3",
"EventCode": "0xA",
"EventName": "UNC_C_BOUNCE_CONTROL",
"PerPkg": "1",
"Unit": "CBOX"
},
{
"BriefDescription": "Uncore Clocks",
"Counter": "0,1,2,3",
"EventName": "UNC_C_CLOCKTICKS",
"PerPkg": "1",
"Unit": "CBOX"
},
{
"BriefDescription": "Counter 0 Occupancy",
"Counter": "0,1,2,3",
"EventCode": "0x1F",
"EventName": "UNC_C_COUNTER0_OCCUPANCY",
"PerPkg": "1",
"PublicDescription": "Since occupancy counts can only be captured in the Cbo's 0 counter, this event allows a user to capture occupancy related information by filtering the Cb0 occupancy count captured in Counter 0. The filtering available is found in the control register - threshold, invert and edge detect. E.g. setting threshold to 1 can effectively monitor how many cycles the monitored queue has an entry.",
"Unit": "CBOX"
},
{
"BriefDescription": "FaST wire asserted",
"Counter": "0,1",
"EventCode": "0x9",
"EventName": "UNC_C_FAST_ASSERTED",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles either the local distress or incoming distress signals are asserted. Incoming distress includes both up and dn.",
"Unit": "CBOX"
},
{
"BriefDescription": "All LLC Misses (code+ data rd + data wr - including demand and prefetch)",
"Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.ANY",
"Filter": "filter_state=0x1",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Filters for any transaction originating from the IPQ or IRQ. This does not include lookups originating from the ISMQ.",
"ScaleUnit": "64Bytes",
"UMask": "0x11",
"Unit": "CBOX"
},
{
"BriefDescription": "Cache Lookups; Data Read Request",
"Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.DATA_READ",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Read transactions",
"UMask": "0x3",
"Unit": "CBOX"
},
{
"BriefDescription": "Cache Lookups; Lookups that Match NID",
"Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.NID",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Qualify one of the other subevents by the Target NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x41",
"Unit": "CBOX"
},
{
"BriefDescription": "Cache Lookups; Any Read Request",
"Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.READ",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Read transactions",
"UMask": "0x21",
"Unit": "CBOX"
},
{
"BriefDescription": "Cache Lookups; External Snoop Request",
"Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.REMOTE_SNOOP",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Filters for only snoop requests coming from the remote socket(s) through the IPQ.",
"UMask": "0x9",
"Unit": "CBOX"
},
{
"BriefDescription": "Cache Lookups; Write Requests",
"Counter": "0,1,2,3",
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.WRITE",
"PerPkg": "1",
"PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Writeback transactions from L2 to the LLC This includes all write transactions -- both Cacheable and UC.",
"UMask": "0x5",
"Unit": "CBOX"
},
{
"BriefDescription": "Lines Victimized; Lines in E state",
"Counter": "0,1,2,3",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.E_STATE",
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
"UMask": "0x2",
"Unit": "CBOX"
},
{
"BriefDescription": "Lines Victimized",
"Counter": "0,1,2,3",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.F_STATE",
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
"UMask": "0x8",
"Unit": "CBOX"
},
{
"BriefDescription": "Lines Victimized; Lines in S State",
"Counter": "0,1,2,3",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.I_STATE",
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
"UMask": "0x4",
"Unit": "CBOX"
},
{
"BriefDescription": "Lines Victimized",
"Counter": "0,1,2,3",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.MISS",
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
"UMask": "0x10",
"Unit": "CBOX"
},
{
"BriefDescription": "M line evictions from LLC (writebacks to memory)",
"Counter": "0,1,2,3",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.M_STATE",
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
"ScaleUnit": "64Bytes",
"UMask": "0x1",
"Unit": "CBOX"
},
{
"BriefDescription": "Lines Victimized; Victimized Lines that Match NID",
"Counter": "0,1,2,3",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.NID",
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.; Qualify one of the other subevents by the Target NID. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x40",
"Unit": "CBOX"
},
{
"BriefDescription": "Lines in S State",
"Counter": "0,1,2,3",
"EventCode": "0x37",
"EventName": "UNC_C_LLC_VICTIMS.S_STATE",
"PerPkg": "1",
"PublicDescription": "Counts the number of lines that were victimized on a fill. This can be filtered by the state that the line was in.",
"UMask": "0x4",
"Unit": "CBOX"
},
{
"BriefDescription": "Cbo Misc; DRd hitting non-M with raw CV=0",
"Counter": "0,1,2,3",
"EventCode": "0x39",
"EventName": "UNC_C_MISC.CVZERO_PREFETCH_MISS",
"PerPkg": "1",
"PublicDescription": "Miscellaneous events in the Cbo.",
"UMask": "0x20",
"Unit": "CBOX"
},
{
"BriefDescription": "Cbo Misc; Clean Victim with raw CV=0",
"Counter": "0,1,2,3",
"EventCode": "0x39",
"EventName": "UNC_C_MISC.CVZERO_PREFETCH_VICTIM",
"PerPkg": "1",
"PublicDescription": "Miscellaneous events in the Cbo.",
"UMask": "0x10",
"Unit": "CBOX"
},
{
"BriefDescription": "Cbo Misc; RFO HitS",
"Counter": "0,1,2,3",
"EventCode": "0x39",
"EventName": "UNC_C_MISC.RFO_HIT_S",
"PerPkg": "1",
"PublicDescription": "Miscellaneous events in the Cbo.; Number of times that an RFO hit in S state. This is useful for determining if it might be good for a workload to use RspIWB instead of RspSWB.",
"UMask": "0x8",
"Unit": "CBOX"
},
{
"BriefDescription": "Cbo Misc; Silent Snoop Eviction",
"Counter": "0,1,2,3",
"EventCode": "0x39",
"EventName": "UNC_C_MISC.RSPI_WAS_FSE",
"PerPkg": "1",
"PublicDescription": "Miscellaneous events in the Cbo.; Counts the number of times when a Snoop hit in FSE states and triggered a silent eviction. This is useful because this information is lost in the PRE encodings.",
"UMask": "0x1",
"Unit": "CBOX"
},
{
"BriefDescription": "Cbo Misc",
"Counter": "0,1,2,3",
"EventCode": "0x39",
"EventName": "UNC_C_MISC.STARTED",
"PerPkg": "1",
"PublicDescription": "Miscellaneous events in the Cbo.",
"UMask": "0x4",
"Unit": "CBOX"
},
{
"BriefDescription": "Cbo Misc; Write Combining Aliasing",
"Counter": "0,1,2,3",
"EventCode": "0x39",
"EventName": "UNC_C_MISC.WC_ALIASING",
"PerPkg": "1",
"PublicDescription": "Miscellaneous events in the Cbo.; Counts the number of times that a USWC write (WCIL(F)) transaction hit in the LLC in M state, triggering a WBMtoI followed by the USWC write. This occurs when there is WC aliasing.",
"UMask": "0x2",
"Unit": "CBOX"
},
{
"BriefDescription": "LRU Queue; LRU Age 0",
"Counter": "0,1,2,3",
"EventCode": "0x3C",
"EventName": "UNC_C_QLRU.AGE0",
"PerPkg": "1",
"PublicDescription": "How often age was set to 0",
"UMask": "0x1",
"Unit": "CBOX"
},
{
"BriefDescription": "LRU Queue; LRU Age 1",
"Counter": "0,1,2,3",
"EventCode": "0x3C",
"EventName": "UNC_C_QLRU.AGE1",
"PerPkg": "1",
"PublicDescription": "How often age was set to 1",
"UMask": "0x2",
"Unit": "CBOX"
},
{
"BriefDescription": "LRU Queue; LRU Age 2",
"Counter": "0,1,2,3",
"EventCode": "0x3C",
"EventName": "UNC_C_QLRU.AGE2",
"PerPkg": "1",
"PublicDescription": "How often age was set to 2",
"UMask": "0x4",
"Unit": "CBOX"
},
{
"BriefDescription": "LRU Queue; LRU Age 3",
"Counter": "0,1,2,3",
"EventCode": "0x3C",
"EventName": "UNC_C_QLRU.AGE3",
"PerPkg": "1",
"PublicDescription": "How often age was set to 3",
"UMask": "0x8",
"Unit": "CBOX"
},
{
"BriefDescription": "LRU Queue; LRU Bits Decremented",
"Counter": "0,1,2,3",
"EventCode": "0x3C",
"EventName": "UNC_C_QLRU.LRU_DECREMENT",
"PerPkg": "1",
"PublicDescription": "How often all LRU bits were decremented by 1",
"UMask": "0x10",
"Unit": "CBOX"
},
{
"BriefDescription": "LRU Queue; Non-0 Aged Victim",
"Counter": "0,1,2,3",
"EventCode": "0x3C",
"EventName": "UNC_C_QLRU.VICTIM_NON_ZERO",
"PerPkg": "1",
"PublicDescription": "How often we picked a victim that had a non-zero age",
"UMask": "0x20",
"Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; All",
"Counter": "0,1,2,3",
"EventCode": "0x1B",
"EventName": "UNC_C_RING_AD_USED.ALL",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in HSX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0xf",
"Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; Down",
"Counter": "0,1,2,3",
"EventCode": "0x1B",
"EventName": "UNC_C_RING_AD_USED.DOWN",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in HSX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0xc",
"Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; Down and Even",
"Counter": "0,1,2,3",
"EventCode": "0x1B",
"EventName": "UNC_C_RING_AD_USED.DOWN_EVEN",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in HSX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Down and Even ring polarity.",
"UMask": "0x4",
"Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; Down and Odd",
"Counter": "0,1,2,3",
"EventCode": "0x1B",
"EventName": "UNC_C_RING_AD_USED.DOWN_ODD",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in HSX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Down and Odd ring polarity.",
"UMask": "0x8",
"Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; Up",
"Counter": "0,1,2,3",
"EventCode": "0x1B",
"EventName": "UNC_C_RING_AD_USED.UP",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in HSX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0x3",
"Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; Up and Even",
"Counter": "0,1,2,3",
"EventCode": "0x1B",
"EventName": "UNC_C_RING_AD_USED.UP_EVEN",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in HSX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Up and Even ring polarity.",
"UMask": "0x1",
"Unit": "CBOX"
},
{
"BriefDescription": "AD Ring In Use; Up and Odd",
"Counter": "0,1,2,3",
"EventCode": "0x1B",
"EventName": "UNC_C_RING_AD_USED.UP_ODD",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AD ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop. We really have two rings in HSX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Up and Odd ring polarity.",
"UMask": "0x2",
"Unit": "CBOX"
},
{
"BriefDescription": "AK Ring In Use; All",
"Counter": "0,1,2,3",
"EventCode": "0x1C",
"EventName": "UNC_C_RING_AK_USED.ALL",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in HSX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0xf",
"Unit": "CBOX"
},
{
"BriefDescription": "AK Ring In Use; Down",
"Counter": "0,1,2,3",
"EventCode": "0x1C",
"EventName": "UNC_C_RING_AK_USED.DOWN",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in HSX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0xc",
"Unit": "CBOX"
},
{
"BriefDescription": "AK Ring In Use; Down and Even",
"Counter": "0,1,2,3",
"EventCode": "0x1C",
"EventName": "UNC_C_RING_AK_USED.DOWN_EVEN",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in HSX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Down and Even ring polarity.",
"UMask": "0x4",
"Unit": "CBOX"
},
{
"BriefDescription": "AK Ring In Use; Down and Odd",
"Counter": "0,1,2,3",
"EventCode": "0x1C",
"EventName": "UNC_C_RING_AK_USED.DOWN_ODD",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in HSX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.; Filters for the Down and Odd ring polarity.",
"UMask": "0x8",
"Unit": "CBOX"
},
{
"BriefDescription": "AK Ring In Use; Up",
"Counter": "0,1,2,3",
"EventCode": "0x1C",
"EventName": "UNC_C_RING_AK_USED.UP",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in HSX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they are on opposite sides of the ring.",
"UMask": "0x3",
"Unit": "CBOX"
},
{
"BriefDescription": "AK Ring In Use; Up and Even",
"Counter": "0,1,2,3",
"EventCode": "0x1C",
"EventName": "UNC_C_RING_AK_USED.UP_EVEN",
"PerPkg": "1",
"PublicDescription": "Counts the number of cycles that the AK ring is being used at this ring stop. This includes when packets are passing by and when packets are being sunk, but does not include when packets are being sent from the ring stop.We really have two rings in HSX -- a clockwise ring and a counter-clockwise ring. On the left side of the ring, the UP direction is on the clockwise ring and DN is on the counter-clockwise ring. On the right side of the ring, this is reversed. The first half of the CBos are on the left side of the ring, and the 2nd half are on the right side of the ring. In other words (for example), in a 4c part, Cbo 0 UP AD is NOT the same ring as CBo 2 UP AD because they a
