|
IDENTIFICATION DIVISION.
PROGRAM-ID. CDR003.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "CDR003.SCO") calling SQL
* procedures in file "CDR003.MCO"
****************************************************************
*
* COMMENT SECTION
*
* DATE 1989/04/07 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* CDR003.SCO
* WRITTEN BY: SUN DAJUN
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* THIS ROUTINE TESTS THE <unique constraint definition>
*
* REFERENCES
* AMERICAN NATIONAL STANDARD database language - SQL
* with Integrity Enhancement
*
* SECTION 6.8
* <check constraint definition>::=
* CHECK (<search condition>)
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 count2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 long1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQLCODE PIC S9(9) COMP.
01 errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 null1 PIC X(2).
01 indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 code1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 code2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* date_time declaration *
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
PROCEDURE DIVISION.
P0.
MOVE "SUN" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
CALL "AUTHCK" USING SQLCODE uidx
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User " uid " expected."
DISPLAY "User " uidx " connected."
DISPLAY " "
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, cdr003.sco"
DISPLAY " "
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
DISPLAY " "
* date_time print *
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0306 *******************
*test if NOT X IS NULL and X IS NOT NULL has the same
*meaning in CHECK condition
* NOT EMPNAME IS NULL on STAFF13
* declared in <table constraint definition>
* <NULL Predicate>
DISPLAY " TEST0306 "
DISPLAY " CHECK CONSTRAINT "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " INSERT INTO STAFF13"
DISPLAY " VALUES('E1','Alice',36,'Deale');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count1"
DISPLAY " FROM STAFF13;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF13"
DISPLAY " VALUES('E1',NULL,36,'Newyork');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count2"
DISPLAY " FROM STAFF13;"
MOVE 0 TO count1
MOVE 0 TO count2
* EXEC SQL DELETE FROM STAFF13;
CALL "SUB1" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF13
* VALUES('E1','Alice',36,'Deale') END-EXEC
CALL "SUB2" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT COUNT(*) INTO:count1
* FROM STAFF13 END-EXEC
CALL "SUB3" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF13
* VALUES('E2',NULL,36,'Newyork') END-EXEC
CALL "SUB4" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO:count2
* FROM STAFF13 END-EXEC
CALL "SUB5" USING SQLCODE count2
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " SQLCODE of second INSERT not equal to 0."
DISPLAY " count1 is 1"
DISPLAY " count2 is 1"
DISPLAY " Your answer is :"
DISPLAY " SQLCOD of second INSERT is ", code1
DISPLAY " count1 is ", count1
DISPLAY " count2 is ", count2
if (code1 NOT = 0 AND count1 = 1 AND count2 = 1)
then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0306','pass','MCO') END-EXEC
CALL "SUB6" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0306','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB7" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr003.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB8" USING SQLCODE
MOVE SQLCODE TO SQL-COD
**************** END TEST 0306 **********
******************** BEGIN TEST0307 *******************
*test LIKE predicate in <table constraints>
* CHECK condition
* EMPNAME NOT LIKE 'T%' on STAFF9
* declared in <table constraint definition>
* <NULL Predicate>
DISPLAY " TEST0307 "
DISPLAY " CHECK CONSTRAINTS "
DISPLAY " SQL with Integrity Enhancement section 6.8"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " INSERT INTO STAFF9"
DISPLAY " VALUES('E1','Thomas',0,'Deale');"
DISPLAY "code1 = SQLCODE;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF9"
DISPLAY " VALUES('E2','Tom',22,'Newyork');"
DISPLAY "code2 = SQLCODE;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF9"
DISPLAY " VALUES('E3','Susan',11,'Hawaii');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM STAFF9;"
* EXEC SQL DELETE FROM STAFF9
CALL "SUB50" USING SQLCODE
* EXEC SQL INSERT INTO STAFF9
* VALUES('E1','Thomas',0,'Deale') END-EXEC
CALL "SUB9" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL INSERT INTO STAFF9
* VALUES('E2','Tom',22,'Newyork') END-EXEC
CALL "SUB10" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code2
* EXEC SQL INSERT INTO STAFF9
* VALUES('E3','Susan',11,'Hawaii') END-EXEC
CALL "SUB11" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM STAFF9 END-EXEC
CALL "SUB12" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is:"
DISPLAY " code1 < 0,code2 < 0,count = 1."
DISPLAY " Your answer is:"
DISPLAY " code1 = ", code1 ",code2 = ", code2
DISPLAY ",count1= ", count1
if (code1 NOT = 0 AND count1 = 1 ) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0307','pass','MCO') END-EXEC
CALL "SUB13" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0307','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB14" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr003.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB15" USING SQLCODE
MOVE SQLCODE TO SQL-COD
****************** END TEST0307 *****************************
******************** BEGIN TEST0308 *******************
*This procedure tests IN element in CHECK specification
*Syntax Rules 6.3.8
* CHECK condition
* GRADE NOT IN (5,22) on STAFF10
DISPLAY " TEST0308 "
DISPLAY " CHECK CONSTRAINTS "
DISPLAY " SQL with Integrity Enhancement section 6.8"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " INSERT INTO STAFF10"
DISPLAY " VALUES('E1','Thomas',5,'Deale');"
DISPLAY "code1 = SQLCODE;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF10"
DISPLAY " VALUES('E2','Tom',22,'Newyork');"
DISPLAY "code2 = SQLCODE;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF10"
DISPLAY " VALUES('E3','Susan',11,'Hawaii');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM STAFF10;"
* EXEC SQL DELETE FROM STAFF10
CALL "SUB51" USING SQLCODE
* EXEC SQL INSERT INTO STAFF10
* VALUES('E1','Thomas',5,'Deale') END-EXEC
CALL "SUB16" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL INSERT INTO STAFF10
* VALUES('E2','Tom',22,'Newyork') END-EXEC
CALL "SUB17" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code2
* EXEC SQL INSERT INTO STAFF10
* VALUES('E3','Susan',11,'Hawaii') END-EXEC
CALL "SUB18" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM STAFF10 END-EXEC
CALL "SUB19" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is:"
DISPLAY " code1 < 0,code2 < 0,count = 1."
DISPLAY " Your answer is:"
DISPLAY " code1 = ", code1 ",code2 = ", code2
DISPLAY ",count1= ", count1
if (code1 NOT = 0 AND count1 = 1 ) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0308','pass','MCO') END-EXEC
CALL "SUB20" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0308','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB21" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr003.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB22" USING SQLCODE
MOVE SQLCODE TO SQL-COD
****************** END TEST0308 *****************************
******************** BEGIN TEST0373 *******************
*Check embeded variable violate CHECH rules.
DISPLAY " TEST0373 "
DISPLAY " EMBEDED VAR violate the integrity
- " "
DISPLAY " SQL with Integrity Enhancement section 6.8"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
MOVE -1 TO count1
MOVE -1 TO count2
MOVE -1 TO indic1
DISPLAY "indic1 = -1;"
DISPLAY " INSERT INTO STAFF4"
DISPLAY " VALUES(:null1:indic1,'R9',36,'Deale');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count1"
DISPLAY " FROM STAFF4;"
DISPLAY " "
DISPLAY "long1 = 22;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF11"
DISPLAY " VALUES('R9','Judy',:long1,'Deale');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count2"
DISPLAY " FROM STAFF11;"
DISPLAY " "
* EXEC SQL DELETE FROM STAFF4;
CALL "SUB23" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF4
* VALUES(:null1:indic1,'R9',36,'Deale') END-EXEC
CALL "SUB24" USING SQLCODE null1 indic1
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO:count1
* FROM STAFF4 END-EXEC
CALL "SUB25" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL DELETE FROM STAFF11;
CALL "SUB26" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE 22 TO long1
* EXEC SQL INSERT INTO STAFF11
* VALUES('R9','Judy',:long1,'Deale') END-EXEC
CALL "SUB27" USING SQLCODE long1
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code2
* EXEC SQL SELECT COUNT(*) INTO:count2
* FROM STAFF11 END-EXEC
CALL "SUB28" USING SQLCODE count2
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB29" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " code1 < 0"
DISPLAY " code2 < 0"
DISPLAY " count1 is 0"
DISPLAY " count2 is 0"
DISPLAY " Your answer is :"
DISPLAY " code1 is ", code1
DISPLAY " code2 is ", code2
DISPLAY " count1 is ", count1
DISPLAY " count2 is ", count2
if (code1 < 0 AND code2 < 0 AND count1 = 0 AND
count2 = 0) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0373','pass','MCO') END-EXEC
CALL "SUB30" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0373','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB31" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr003.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB32" USING SQLCODE
MOVE SQLCODE TO SQL-COD
**************** END TEST 0373 **********
******************** BEGIN TEST0374 *******************
*Check embeded variable violate CHECH rules.
DISPLAY " TEST0374 "
DISPLAY " EMBEDED VAR violate the integrity
- " "
DISPLAY " SQL with Integrity Enhancement section 6.8"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " INSERT INTO STAFF5"
DISPLAY " VALUES('R9','Alice',15,'Deale');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count1"
DISPLAY " FROM STAFF5;"
DISPLAY " "
DISPLAY " UPDATE STAFF5"
DISPLAY " SET GRADE = 10 * :long1 / 5 + 1"
DISPLAY " WHERE EMPNUM = 'R9';"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count2"
DISPLAY " FROM STAFF5;"
DISPLAY " "
MOVE -1 TO count1
MOVE -1 TO count2
* EXEC SQL DELETE FROM STAFF5;
CALL "SUB33" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF5
* VALUES('R9','Alice',15,'Deale') END-EXEC
CALL "SUB34" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO:count1
* FROM STAFF5 END-EXEC
CALL "SUB35" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
MOVE 10 TO long1
* EXEC SQL UPDATE STAFF5
* SET GRADE = 10 * :long1 / 5 + 1
* WHERE EMPNUM = 'R9' END-EXEC
CALL "SUB36" USING SQLCODE long1
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code2
* EXEC SQL SELECT COUNT(*) INTO:count2
* FROM STAFF5 END-EXEC
CALL "SUB37" USING SQLCODE count2
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB38" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " code1 = 0"
DISPLAY " code2 < 0"
DISPLAY " count1 is 1"
DISPLAY " count2 is 1"
DISPLAY " Your answer is :"
DISPLAY " code1 is ", code1
DISPLAY " code2 is ", code2
DISPLAY " count1 is ", count1
DISPLAY " count2 is ", count2
if (code1 = 0 AND code2 < 0 AND count1 = 1 AND
count2 = 1) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0374','pass','MCO') END-EXEC
CALL "SUB39" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0374','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB40" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr003.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB41" USING SQLCODE
MOVE SQLCODE TO SQL-COD
**************** END TEST 0374 **********
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
¤ Dauer der Verarbeitung: 0.28 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
