|
IDENTIFICATION DIVISION.
PROGRAM-ID. CDR009.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "CDR009.SCO") calling SQL
* procedures in file "CDR009.MCO"
****************************************************************
*
* COMMENT SECTION
*
* DATE 1987/12/07 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* CDR009.SCO
* WRITTEN BY: SUN DAJUN
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* THIS ROUTINE TESTS THE REFERENCE INTEGRITY CONSTRAINT FOR
* SQL.
*
* REFERENCES
* AMERICAN NATIONAL STANDARD database language - SQL
* with Integrity Enhancement
*
* SECTION 6.6 <unique constraint definition>
* <unique constraint definition>::=
* <unique specifition>(<unique column
* list>)
* <unique specifition>::= UNIQUE|PRIMARY KEY
*
* SECTION 6.7 <referential constraint definition>
* <referential constraint definition>::=
* FOREIGN KEY (<referencing columns>)
* <references specification>
* <references specification>::=
* REFERENCES <referenced table and columns>
* <referencing columns>::=
* <reference column list>
* <refereced table and columns>::=
* <table name>((<reference column list>
* <reference column list>::=
* <column name>({,<column name>}...)
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 count2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQLCODE PIC S9(9) COMP.
01 errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 uid PIC X(18).
01 uidx PIC X(18).
01 code1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* date_time declaration *
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
PROCEDURE DIVISION.
P0.
MOVE "SUN" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
CALL "AUTHCK" USING SQLCODE uidx
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User " uid " expected."
DISPLAY "User " uidx " connected."
DISPLAY " "
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, cdr009.sco"
DISPLAY " "
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
DISPLAY " "
* date_time print *
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0327 *******************
*This program inserts two rows into PRIMARY KEY TABLE
*-- STAFF3, these two rows have the same value 'E1' in
*PRIMARY COLUMN and there is no (E1,*,*) in referen-
*cing table.
DISPLAY " TEST0327 "
DISPLAY " PRIMARY KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " INSERT INTO STAFF3"
DISPLAY " VALUES('E1','Alice',12,'Deale');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count1"
DISPLAY " FROM STAFF3;"
DISPLAY " "
DISPLAY " "
DISPLAY " INSERT INTO STAFF3"
DISPLAY " VALUES('E1','Tom',12,'Newyork');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count2"
DISPLAY " FROM STAFF3;"
MOVE 0 TO count1
MOVE 0 TO count2
* EXEC SQL DELETE FROM WORKS3;
CALL "SUB1" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DELETE FROM STAFF3;
CALL "SUB2" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF3
* VALUES('E1','Alice',12,'Deale') END-EXEC
CALL "SUB3" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT COUNT(*) INTO:count1
* FROM STAFF3 END-EXEC
CALL "SUB4" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF3
* VALUES('E1','Tom',12,'Newyork') END-EXEC
CALL "SUB5" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO:count2
* FROM STAFF3 END-EXEC
CALL "SUB6" USING SQLCODE count2
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " SQLCODE of second INSERT not equal to 0."
DISPLAY " count1 is 1"
DISPLAY " count2 is 1"
DISPLAY " Your answer is :"
DISPLAY " SQLCOD of second INSERT is ", code1
DISPLAY " count1 is ", count1
DISPLAY " count2 is ", count2
if (code1 NOT = 0 AND count1 = 1 AND count2 = 1)
then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0327','pass','MCO') END-EXEC
CALL "SUB7" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0327','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB8" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr009.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB9" USING SQLCODE
MOVE SQLCODE TO SQL-COD
**************** END TEST 0327 **********
******************** BEGIN TEST0328 *******************
*This program updates a row in PRIMARY KEY TABLE
*-- STAFF3, set (E2,*,*,*) to (E9,*,*,*) ,there
*are (E2,*,*) In WORKS3.
DISPLAY " TEST0328 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " UPDATE STAFF3"
DISPLAY " SET EMPNUM='E9'"
DISPLAY " WHERE EMPNUM='E2';"
DISPLAY "code1 = SQLCODE;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM STAFF3"
DISPLAY " WHERE EMPNUM = 'E2';"
* EXEC SQL DELETE FROM WORKS3;
CALL "SUB10" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DELETE FROM PROJ3;
CALL "SUB11" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DELETE FROM STAFF3;
CALL "SUB12" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF3
* SELECT * FROM STAFF END-EXEC
CALL "SUB13" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO PROJ3
* SELECT * FROM PROJ END-EXEC
CALL "SUB14" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO WORKS3
* SELECT * FROM WORKS END-EXEC
CALL "SUB15" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL UPDATE STAFF3
* SET EMPNUM = 'E9'
* WHERE EMPNUM = 'E2' END-EXEC
CALL "SUB16" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM STAFF3
* WHERE EMPNUM = 'E2' END-EXEC
CALL "SUB17" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 not equal 0"
DISPLAY " count1 = 1"
DISPLAY " Your answer is code1=", code1
DISPLAY " count1 = ", count1
if (code1 < 0 AND count1 = 1) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0328','pass','MCO') END-EXEC
CALL "SUB18" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0328','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB19" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr009.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB20" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0328 *************************
******************** BEGIN TEST0329 *******************
*This program updates a row in PRIMARY KEY TABLE
*-- STAFF3, that cause two rows have the same value
*'E1' in PRIMARY COLUMN.
DISPLAY " TEST0329 "
DISPLAY " PRIMARY KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " INSERT INTO STAFF3"
DISPLAY " VALUES('E1','Alice',45,'Deale');"
DISPLAY " "
DISPLAY " INSERT INTO STAFF3"
DISPLAY " VALUES('E2','Tom',45,'Deale');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count1"
DISPLAY " FROM STAFF3;"
DISPLAY " "
DISPLAY " UPDATE STAFF3"
DISPLAY " SET EMPNUM = 'E1'"
DISPLAY " WHERE EMPNUM = 'E2';"
DISPLAY " "
MOVE 0 TO count1
MOVE 0 TO count2
* EXEC SQL DELETE FROM WORKS3;
CALL "SUB21" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DELETE FROM STAFF3;
CALL "SUB22" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF3
* VALUES('E1','Alice',45,'Deale') END-EXEC
CALL "SUB23" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF3
* VALUES('E2','Tom',45,'Deale') END-EXEC
CALL "SUB24" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT COUNT(*) INTO:count1
* FROM STAFF3 END-EXEC
CALL "SUB25" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL UPDATE STAFF3
* SET EMPNUM = 'E1'
* WHERE EMPNUM = 'E2' END-EXEC
CALL "SUB26" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO:count2
* FROM STAFF3
* WHERE EMPNUM = 'E2' END-EXEC
CALL "SUB27" USING SQLCODE count2
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " SQLCODE of second INSERT not equal to 0."
DISPLAY " count1 is 2"
DISPLAY " count2 is 1"
DISPLAY " Your answer is :"
DISPLAY " SQLCOD of second INSERT is ", code1
DISPLAY " count1 is ", count1
DISPLAY " count2 is ", count2
if (code1 NOT = 0 AND count1 = 2 AND count2 = 1)
then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0329','pass','MCO') END-EXEC
CALL "SUB28" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0329','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB29" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr009.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB30" USING SQLCODE
MOVE SQLCODE TO SQL-COD
**************** END TEST 0329 **********
******************** BEGIN TEST0330 *******************
*This test update a row or rows on FOREIGN KEY
*column in table WORKS3,set those rows (E1,*,*) to
*(E9,*,*),but there is not a row ('E9',*,*,*) in
* PRIMARY TABLE -- STAFF3, this will bring about an
* ERROR.
DISPLAY " TEST0330 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " DELETE FROM WORKS3;"
DISPLAY " "
DISPLAY " DELETE FROM PROJ3;"
DISPLAY " "
DISPLAY " DELETE FROM STAFF3;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF3"
DISPLAY " SELECT * FROM STAFF;"
DISPLAY " "
DISPLAY " INSERT INTO PROJ3"
DISPLAY " SELECT * FROM PROJ;"
DISPLAY " "
DISPLAY " INSERT INTO WORKS3"
DISPLAY " SELECT * FROM WORKS;"
DISPLAY " "
DISPLAY " UPDATE WORKS3"
DISPLAY " SET EMPNUM='E9'"
DISPLAY " WHERE EMPNUM='E2';"
DISPLAY "code1 = SQLCODE;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM WORKS3"
DISPLAY " WHERE EMPNUM = 'E2';"
* EXEC SQL DELETE FROM WORKS3;
CALL "SUB31" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DELETE FROM PROJ3;
CALL "SUB32" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DELETE FROM STAFF3;
CALL "SUB33" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF3
* SELECT * FROM STAFF END-EXEC
CALL "SUB34" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO PROJ3
* SELECT * FROM PROJ END-EXEC
CALL "SUB35" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO WORKS3
* SELECT * FROM WORKS END-EXEC
CALL "SUB36" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL UPDATE WORKS3
* SET EMPNUM = 'E9'
* WHERE EMPNUM = 'E2' END-EXEC
CALL "SUB37" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM WORKS3
* WHERE EMPNUM = 'E2' END-EXEC
CALL "SUB38" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 not equal 0"
DISPLAY " count1 = 2"
DISPLAY " Your answer is code1=", code1
DISPLAY " count1 = ", count1
if (code1 NOT = 0 AND count1 = 2) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0330','pass','MCO') END-EXEC
CALL "SUB39" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0330','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB40" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr009.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB41" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0330 *************************
******************** BEGIN TEST0331 ******************
*This test update a row or rows on FOREIGN KEY
*column in table WORKS3,set those rows (E1,*,*) to
*(E2,*,*),and there are such a row (E2,-,-,-) in
* PRIMARY TABLE -- STAFF3 and rows (E2,*,*) in
*WORKS3.
DISPLAY " TEST0331 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " DELETE FROM WORKS3;"
DISPLAY " "
DISPLAY " DELETE FROM PROJ3;"
DISPLAY " "
DISPLAY " DELETE FROM STAFF3;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF3"
DISPLAY " SELECT * FROM STAFF;"
DISPLAY " "
DISPLAY " INSERT INTO PROJ3"
DISPLAY " SELECT * FROM PROJ;"
DISPLAY " "
DISPLAY " INSERT INTO WORKS3"
DISPLAY " SELECT * FROM WORKS;"
DISPLAY " "
DISPLAY " UPDATE WORKS3"
DISPLAY " SET EMPNUM='E2'"
DISPLAY " WHERE EMPNUM='E1';"
DISPLAY "code1 = SQLCODE;"
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM WORKS3"
DISPLAY " WHERE EMPNUM = 'E1';"
MOVE 0 TO count1
* EXEC SQL DELETE FROM WORKS3;
CALL "SUB42" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DELETE FROM STAFF3;
CALL "SUB43" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DELETE FROM PROJ3;
CALL "SUB44" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF3
* SELECT * FROM STAFF END-EXEC
CALL "SUB45" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO PROJ3
* SELECT * FROM PROJ END-EXEC
CALL "SUB46" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO WORKS3
* SELECT * FROM WORKS END-EXEC
CALL "SUB47" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL UPDATE WORKS3
* SET EMPNUM = 'E2'
* WHERE EMPNUM = 'E1' END-EXEC
CALL "SUB48" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM WORKS3
* WHERE EMPNUM = 'E1' END-EXEC
CALL "SUB49" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 equal 0"
DISPLAY " count1 = 0"
DISPLAY " Your answer is code1=", code1
DISPLAY " count1 = ", count1
if (code1 = 0 AND count1 = 0) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0331','pass','MCO') END-EXEC
CALL "SUB50" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0331','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB51" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr009.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB52" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0331 *************************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
¤ Dauer der Verarbeitung: 0.32 Sekunden
(vorverarbeitet)
¤
|
schauen Sie vor die Tür
Fenster
Die Firma ist wie angegeben erreichbar.
Die farbliche Syntaxdarstellung ist noch experimentell.
|
