|
IDENTIFICATION DIVISION.
PROGRAM-ID. CDR011.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "CDR011.SCO") calling SQL
* procedures in file "CDR011.MCO"
****************************************************************
*
* COMMENT SECTION
*
* DATE 1989/04/07 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* CDR011.SCO
* WRITTEN BY: SUN DAJUN
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* THIS ROUTINE TESTS THE REFERENCE INTEGRITY CONSTRAINT FOR
* SQL.
*
* REFERENCES
* AMERICAN NATIONAL STANDARD database language - SQL
* with Integrity Enhancement
*
* SECTION 6.6 <unique constraint definition>
* <unique constraint definition>::=
* <unique specifition>(<unique column
* list>)
* <unique specifition>::= UNIQUE|PRIMARY KEY
*
* SECTION 6.7 <referential constraint definition>
* <referential constraint definition>::=
* FOREIGN KEY (<referencing columns>)
* <references specification>
* <references specification>::=
* REFERENCES <referenced table and columns>
* <referencing columns>::=
* <reference column list>
* <refereced table and columns>::=
* <table name>((<reference column list>
* <reference column list>::=
* <column name>({,<column name>}...)
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 EMPNO1 PIC X(2).
01 count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 count2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQLCODE PIC S9(9) COMP.
01 errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 uid PIC X(18).
01 uidx PIC X(18).
01 code1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* date_time declaration *
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
PROCEDURE DIVISION.
P0.
MOVE "SUN" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
CALL "AUTHCK" USING SQLCODE uidx
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User " uid " expected."
DISPLAY "User " uidx " connected."
DISPLAY " "
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, cdr011.sco"
DISPLAY " "
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
DISPLAY " "
* date_time print *
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0335 *******************
*This test inserts a row (E8,-,-,-,E9) in STAFF_C
*but (E9,-,-,-,-) isn't in STAFF_C, this should be
*an error
DISPLAY " TEST0335 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " INSERT INTO STAFF_C"
DISPLAY " VALUES('E8','Alice',12,'Deale','E9');"
COMPUTE count1 = -1
* EXEC SQL INSERT INTO STAFF_C
* VALUES('E8','Alice',12,'Deale','E9') END-EXEC
CALL "SUB1" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO:count1
* FROM STAFF_C
* WHERE MGR = 'E9' END-EXEC
CALL "SUB2" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB3" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " SQLCODE of second INSERT not equal to 0."
DISPLAY " count1 is 0"
DISPLAY " Your answer is :"
DISPLAY " SQLCOD of second insert is ", code1
DISPLAY " count1 is ", count1
if (code1 NOT = 0 AND count1 = 0) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0335','pass','MCO') END-EXEC
CALL "SUB4" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0335','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB5" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr011.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB6" USING SQLCODE
MOVE SQLCODE TO SQL-COD
************************ END TEST0335 ************************
******************** BEGIN TEST0336 *********************
*This test updates a row PRIMARY KEY TABLE -- STAFF_C
*set (E1,-,-,-,-) to (E9,-,-,-,-), but there are such
*rows (*,*,*,*,E1) in STAFF_C, this should be an
*ERROR.
DISPLAY " TEST0336 "
DISPLAY " REFERENTIAL INTEGRITY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " UPDATE STAFF_C"
DISPLAY " SET EMPNUM='E9'"
DISPLAY " WHERE EMPNUM='E1';"
DISPLAY "code1 = SQLCODE"
DISPLAY " "
DISPLAY " SELECT EMPNUM INTO :EMPNO1"
DISPLAY " FROM STAFF_C"
DISPLAY " WHERE EMPNUM = 'E1';"
* EXEC SQL UPDATE STAFF_C
* SET EMPNUM='E9'
* WHERE EMPNUM='E1' END-EXEC
CALL "SUB7" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
MOVE "NV" TO EMPNO1
* EXEC SQL SELECT EMPNUM INTO :EMPNO1
* FROM STAFF_C
* WHERE EMPNUM = 'E1' END-EXEC
CALL "SUB8" USING SQLCODE EMPNO1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB9" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 not equal to 0"
DISPLAY " EMPNO1 = E1"
DISPLAY " Your answer is code1=", code1
DISPLAY " EMPNO1 = ", EMPNO1
if (code1 < 0 AND EMPNO1 = "E1") then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0336','pass','MCO') END-EXEC
CALL "SUB10" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0336','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB11" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr011.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB12" USING SQLCODE
MOVE SQLCODE TO SQL-COD
****************** END TEST0336 ********************
******************** BEGIN TEST0337 *******************
*This program updates a row in PRIMARY KEY TABLE --
*STAFF_C, set (E6,-,-,-,-) to (E5,-,-,-,-), this
*will let two rows have the same value 'E1' in PRIMARY
*COLUMN.
DISPLAY " TEST0337 "
DISPLAY " PRIMARY KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " UPDATE STAFF_C"
DISPLAY " SET EMPNUM = :EMPNO1"
DISPLAY " WHERE EMPNUM = 'E6';"
DISPLAY " "
COMPUTE count1 = -1
MOVE "E5" TO EMPNO1
* EXEC SQL UPDATE STAFF_C
* SET EMPNUM = :EMPNO1
* WHERE EMPNUM = 'E6' END-EXEC
CALL "SUB13" USING SQLCODE EMPNO1
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO:count1
* FROM STAFF_C
* WHERE EMPNUM ='E6' END-EXEC
CALL "SUB14" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB15" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " SQLCODE of second INSERT not equal to 0."
DISPLAY " count1 is 1"
DISPLAY " Your answer is :"
DISPLAY " SQLCOD of second INSERT is ", code1
DISPLAY " count1 is ", count1
if (code1 < 0 AND count1 = 1) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0337','pass','MCO') END-EXEC
CALL "SUB16" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0337','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB17" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr011.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB18" USING SQLCODE
MOVE SQLCODE TO SQL-COD
**************** END TEST 0337 **********
******************** BEGIN TEST0338 *******************
*This test update a row or rows on FOREIGN KEY
*column,set those rows (*,*,*,*,E1) to (*,*,*,*,E9),
*but there is not a row (E9,*,*,*,*) in PRIMARY KEY,
*column.this will bring about an ERROR.
DISPLAY " TEST0338 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " UPDATE STAFF_C"
DISPLAY " SET MGR='E9'"
DISPLAY " WHERE MGR='E1';"
DISPLAY "code1 = SQLCODE;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM STAFF_C"
DISPLAY " WHERE MGR = 'E1';"
* EXEC SQL UPDATE STAFF_C
* SET MGR= 'E9'
* WHERE MGR = 'E1' END-EXEC
CALL "SUB19" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
COMPUTE count1 = -1
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM STAFF_C
* WHERE MGR = 'E1' END-EXEC
CALL "SUB20" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB21" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 not equal 0"
DISPLAY " count1 = 2"
DISPLAY " Your answer is code1=", code1
DISPLAY " count1 = ", count1
if (code1 < 0 AND count1 = 2) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0338','pass','MCO') END-EXEC
CALL "SUB22" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0338','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB23" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr011.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB24" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0338 *************************
******************** BEGIN TEST0339 ******************
*This test update a row or rows on FOREIGN KEY
*column in table STAFF_C,set those rows (*,*,*,*,E7)
*to (*,*,*,*,E5),and there are such a row (E5,-,-,-,
*-) in PRIMARY TABLE -- STAFF_C.
DISPLAY " TEST0339 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " UPDATE STAFF_C"
DISPLAY " SET MGR = 'E5'"
DISPLAY " WHERE MGR = 'E7';"
DISPLAY "code1 = SQLCODE;"
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM STAFF_C"
DISPLAY " WHERE MGR = 'E5';"
* EXEC SQL UPDATE STAFF_C
* SET MGR = 'E5'
* WHERE MGR = 'E7' END-EXEC
CALL "SUB25" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
COMPUTE count1 = -1
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM STAFF_C
* WHERE MGR = 'E5' END-EXEC
CALL "SUB26" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB27" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 equal 0"
DISPLAY " count1 = 2"
DISPLAY " Your answer is code1=", code1
DISPLAY " count1 = ", count1
if (code1 = 0 AND count1 = 2) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0339','pass','MCO') END-EXEC
CALL "SUB28" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0339','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB29" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr011.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB30" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0339 *************************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
¤ Dauer der Verarbeitung: 0.27 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
