|
IDENTIFICATION DIVISION.
PROGRAM-ID. CDR016.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "CDR016.SCO") calling SQL
* procedures in file "CDR016.MCO"
****************************************************************
*
* COMMENT SECTION
*
* DATE 1989/04/07 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* CDR016.SCO
* WRITTEN BY: SUN DAJUN
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* THIS ROUTINE TESTS THE <unique constraint definition>
*
* REFERENCES
* AMERICAN NATIONAL STANDARD database language - SQL
* with Integrity Enhancement
*
* SECTION 6.6 <unique constraint definition>
* <unique constraint definition>::=
* <unique specifition>(<unique column
* list>)
* <unique specifition>::= UNIQUE|PRIMARY KEY
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 count2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQLCODE PIC S9(9) COMP.
01 errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 code1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* date_time declaration *
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
PROCEDURE DIVISION.
P0.
MOVE "SUN" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
CALL "AUTHCK" USING SQLCODE uidx
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User " uid " expected."
DISPLAY "User " uidx " connected."
DISPLAY " "
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, cdr016.sco"
DISPLAY " "
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
DISPLAY " "
* date_time print *
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0352 *******************
*This program updates a row in PRIMARY KEY TABLE
*-- SIZ1_P, this will let two rows have the same value
* in PRIMARY COLUMNs.
DISPLAY " FIPS sizing TEST0352 "
DISPLAY " PRIMARY KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " SELECT COUNT(*) INTO:count1"
DISPLAY " FROM SIZ1_P"
DISPLAY " WHERE S1 = 'E1' AND S2 = 'TTS' AND S3 = 1;"
DISPLAY " "
DISPLAY " UPDATE SIZ1_P"
DISPLAY " SET S2 = 'TTT'"
DISPLAY " WHERE S1 = 'E1' AND S2 = 'TTS' AND S3 = 1;"
DISPLAY "code1 = SQLCODE;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count2"
DISPLAY " FROM SIZ1_P"
DISPLAY " WHERE S1 = 'E1' AND S2 = 'TTT' AND S3 = 1;"
DISPLAY " "
MOVE 0 TO count1
MOVE 0 TO count2
* EXEC SQL SELECT COUNT(*) INTO:count1
* FROM SIZ1_P
* WHERE S1 = 'E1' AND S2 = 'TTS' AND S3 = 1 END-EXEC
CALL "SUB1" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL UPDATE SIZ1_P
* SET S2 = 'TTT'
* WHERE S1 = 'E1' AND S2 = 'TTS' AND S3 = 1 END-EXEC
CALL "SUB2" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO:count2
* FROM SIZ1_P
* WHERE S1 = 'E1' AND S2 = 'TTT' AND S3 = 1 END-EXEC
CALL "SUB3" USING SQLCODE count2
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB4" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " code1 is not equal to 0."
DISPLAY " count1 is 1"
DISPLAY " count2 is 1"
DISPLAY " Your answer is :"
DISPLAY " code1 is ", code1
DISPLAY " count1 is ", count1
DISPLAY " count2 is ", count2
if (code1 NOT = 0 AND count1 = 1 AND count2 = 1)
then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0352','pass','MCO') END-EXEC
CALL "SUB5" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0352','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB6" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr016.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB7" USING SQLCODE
MOVE SQLCODE TO SQL-COD
**************** END TEST 0352 **********
******************** BEGIN TEST0353 *******************
*This test updates a row or rows on FOREIGN KEY
*column in table SIZ1_F,set those rows (E1,*,*,*,*,*
**,*,*) to (E9,*,*,*,*,*,*,*,*),but there is not a row
*(E9,*,*,*,*,*,*,*,*,*) in PRIMARY TABLE -- SIZ1_P,
*this should be an ERROR.
DISPLAY " FIPS sizing TEST0353 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " UPDATE SIZ1_F"
DISPLAY " SET F1='E9'"
DISPLAY " WHERE F1='E2';"
DISPLAY "code1 = SQLCODE;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM SIZ1_F"
DISPLAY " WHERE F1 = 'E2';"
* EXEC SQL UPDATE SIZ1_F
* SET F1 = 'E9'
* WHERE F1 = 'E2' END-EXEC
CALL "SUB8" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM SIZ1_F
* WHERE F1 = 'E2' END-EXEC
CALL "SUB9" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB10" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 not equal 0"
DISPLAY " count1 = 3"
DISPLAY " Your answer is code1=", code1
DISPLAY " count1 = ", count1
if (code1 NOT = 0 AND count1 = 3) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0353','pass','MCO') END-EXEC
CALL "SUB11" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0353','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB12" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr016.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB13" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0353 *************************
******************** BEGIN TEST0354 ******************
*This test update a row or rows on FOREIGN KEY
*column in table SIZ1_F and there is correspondind
*primary key a row in PRIMARY TABLE -- SIZ1_P and
*same forgeign key rows in SIZ1_F.
DISPLAY " FIPS sizing TEST0354 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " UPDATE SIZ1_F"
DISPLAY " SET F1='E1'"
DISPLAY " WHERE F1='E2' AND F6 = 'RRR';"
DISPLAY "code1 = SQLCODE;"
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM SIZ1_F"
DISPLAY " WHERE F1 = 'E1';"
* EXEC SQL UPDATE SIZ1_F
* SET F1 = 'E1'
* WHERE F1 = 'E2' AND F6 = 'RRR' END-EXEC
CALL "SUB14" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM SIZ1_F
* WHERE F1 = 'E1' END-EXEC
CALL "SUB15" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB16" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 equal 0"
DISPLAY " count1 = 4"
DISPLAY " Your answer is code1=", code1
DISPLAY " count1 = ", count1
if (code1 = 0 AND count1 = 4) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0354','pass','MCO') END-EXEC
CALL "SUB17" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0354','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB18" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr016.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB19" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0354 *************************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
¤ Dauer der Verarbeitung: 0.16 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
