|
IDENTIFICATION DIVISION.
PROGRAM-ID. CDR018.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "CDR018.SCO") calling SQL
* procedures in file "CDR018.MCO"
****************************************************************
*
* COMMENT SECTION
*
* DATE 1989/04/07 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* CDR018.SCO
* WRITTEN BY: SUN DAJUN
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* THIS ROUTINE TESTS THE REFERENTIAL INTEGRITY CONSTRAINT FOR
* SQL.
*
* REFERENCES
* AMERICAN NATIONAL STANDARD database language - SQL
* with Integrity Enhancement
*
* SECTION 6.7 <referential constraint definition>
* <referential constraint definition>::=
* FOREIGN KEY (<referencing columns>)
* <references specification>
* <references specification>::=
* REFERENCES <referenced table and columns>
* <referencing columns>::=
* <reference column list>
* <refereced table and columns>::=
* <table name>((<reference column list>
* <reference column list>::=
* <column name>({,<column name>}...)
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 EMPNO1 PIC X(3).
01 count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 count2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQLCODE PIC S9(9) COMP.
01 errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 code1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* date_time declaration *
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
PROCEDURE DIVISION.
P0.
MOVE "SUN" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
CALL "AUTHCK" USING SQLCODE uidx
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User " uid " expected."
DISPLAY "User " uidx " connected."
DISPLAY " "
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, cdr018.sco"
DISPLAY " "
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
DISPLAY " "
* date_time print *
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0360 *******************
*This test inserts a row in FOREIGN KEY TABLE --
*SIZ3_F, but its primary columns value of this row
*has not been inserted into PRIMARY KEY TABLEs --
*SIZ3_P%. This should be an Error.
DISPLAY " FIPS sizing TEST0360 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " INSERT INTO SIZ3_F"
DISPLAY " VALUES (' F',' D',3,' E',4,' F','
- " G',5,6,7,'TTT');"
DISPLAY " INSERT INTO SIZ3_F"
DISPLAY " VALUES (' D',' E',4,' F',5,' G','
- " H',6,7,100,'TTT');"
* EXEC SQL INSERT INTO SIZ3_F
* VALUES (' F',' D',3,' E',4,' F',' G',5,6,7,'TTT')
* END-EXEC
CALL "SUB1" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL INSERT INTO SIZ3_F
* VALUES (' D',' E',4,' F',5,' G',' H',6,7,100,'TTT')
* END-EXEC
CALL "SUB2" USING SQLCODE
MOVE SQLCODE TO SQL-COD
COMPUTE code1 = code1 * SQLCODE
* EXEC SQL SELECT COUNT(*) INTO:count1
* FROM SIZ3_F END-EXEC
CALL "SUB3" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB4" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " code1 is not equal to 0."
DISPLAY " count1 is 8"
DISPLAY " Your answer is :"
DISPLAY " code1 is ", code1
DISPLAY " count1 is ", count1
if (code1 NOT = 0 AND count1 = 8) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0360','pass','MCO') END-EXEC
CALL "SUB5" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0360','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB6" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr018.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB7" USING SQLCODE
MOVE SQLCODE TO SQL-COD
************************ END TEST0360 ************************
******************** BEGIN TEST0361 *********************
*This test deletes a row from PRIMARY KEY
*TABLE -- SIZ3_P%, but there are coresponding rows in
*FOREIGN KEY TABLEs -- SIZ3_F, this should be an ERROR.
DISPLAY " FIPS sizing TEST0361 "
DISPLAY " REFERENTIAL INTEGRITY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " DELETE FROM SIZ3_P1"
DISPLAY " WHERE F1 = ' A';"
* EXEC SQL DELETE FROM SIZ3_P1
* WHERE F1 = ' A' END-EXEC
CALL "SUB8" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
MOVE "NV" TO EMPNO1
* EXEC SQL SELECT F1 INTO :EMPNO1
* FROM SIZ3_P1
* WHERE F1 = ' A' END-EXEC
CALL "SUB9" USING SQLCODE EMPNO1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB10" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 not equal to 0"
DISPLAY " Your answer is code1=", code1
if (code1 NOT = 0 AND EMPNO1 = " A") then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0361','pass','MCO') END-EXEC
CALL "SUB11" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0361','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB12" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr018.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB13" USING SQLCODE
MOVE SQLCODE TO SQL-COD
****************** END TEST0361 ********************
******************** BEGIN TEST0362 *******************
*This program updates a row in PRIMARY KEY TABLE
*-- SIZ3_P1, set (A,-) to (Z,-), there are (A,*,*,*,*,
**,*,*,*,*,*,*) in SIZ3_F.
DISPLAY " FIPS sizing TEST0362 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " UPDATE SIZ3_P1"
DISPLAY " SET F1=' Z'"
DISPLAY " WHERE F1=' A';"
DISPLAY " "
DISPLAY " UPDATE SIZ3_P10"
DISPLAY " SET F1 = 100"
DISPLAY " WHERE F1 = 8;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM SIZ3_P1"
DISPLAY " WHERE F1 = ' A';"
* EXEC SQL UPDATE SIZ3_P1
* SET F1 = ' Z'
* WHERE F1 = ' A' END-EXEC
CALL "SUB14" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL UPDATE SIZ3_P10
* SET F1 = 100
* WHERE F1 = 8 END-EXEC
CALL "SUB15" USING SQLCODE
MOVE SQLCODE TO SQL-COD
COMPUTE code1 = code1 * SQLCODE
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM SIZ3_P1
* WHERE F1 = ' A' END-EXEC
CALL "SUB16" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB17" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 not equal 0"
DISPLAY " count1 = 1"
DISPLAY " Your answer is code1=", code1
DISPLAY " count1 = ", count1
if (code1 NOT = 0 AND count1 = 1) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0362','pass','MCO') END-EXEC
CALL "SUB18" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0362','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB19" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr018.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB20" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0362 *************************
******************** BEGIN TEST0363 *******************
*This program updates a row in PRIMARY KEY TABLE
*-- SIZ3_P1, this will let two rows have the same value
* in PRIMARY COLUMNs.
DISPLAY " FIPS sizing TEST0363 "
DISPLAY " PRIMARY KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " SELECT COUNT(*) INTO:count1"
DISPLAY " FROM SIZ3_P1"
DISPLAY " WHERE F1 = ' A';"
DISPLAY " "
DISPLAY " UPDATE SIZ3_P1"
DISPLAY " SET F1 = ' B'"
DISPLAY " WHERE F1 = ' A';"
DISPLAY "code1 = SQLCODE;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count2"
DISPLAY " FROM SIZ3_P1"
DISPLAY " WHERE F1 = ' A';"
DISPLAY " "
MOVE 0 TO count1
MOVE 0 TO count2
* EXEC SQL SELECT COUNT(*) INTO:count1
* FROM SIZ3_P1
* WHERE F1 = ' A' END-EXEC
CALL "SUB21" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL UPDATE SIZ3_P1
* SET F1 = ' B'
* WHERE F1 = ' A' END-EXEC
CALL "SUB22" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO:count2
* FROM SIZ3_P1
* WHERE F1 = ' A' END-EXEC
CALL "SUB23" USING SQLCODE count2
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB24" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " code1 is not equal to 0."
DISPLAY " count1 is 1"
DISPLAY " count2 is 1"
DISPLAY " Your answer is :"
DISPLAY " code1 is ", code1
DISPLAY " count1 is ", count1
DISPLAY " count2 is ", count2
if (code1 NOT = 0 AND count1 = 1 AND count2 = 1)
then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0363','pass','MCO') END-EXEC
CALL "SUB25" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0363','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB26" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr018.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB27" USING SQLCODE
MOVE SQLCODE TO SQL-COD
**************** END TEST 0363 **********
******************** BEGIN TEST0364 *******************
*This test updates a row or rows on FOREIGN KEY
*column in table SIZ3_F,set those rows (E1,*,*,*,*,*
**,*,*) to (E9,*,*,*,*,*,*,*,*),but there is not a row
*(E9,*,*,*,*,*,*,*,*,*) in PRIMARY TABLE -- SIZ3_P1,
*this should be an ERROR.
DISPLAY " FIPS sizing TEST0364 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " UPDATE SIZ3_F"
DISPLAY " SET P1=' Z'"
DISPLAY " WHERE P1=' A';"
DISPLAY "code1 = SQLCODE;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM SIZ3_F"
DISPLAY " WHERE P1 = ' A';"
MOVE 0 TO count1
* EXEC SQL UPDATE SIZ3_F
* SET P1 = ' Z'
* WHERE P1 = ' A' END-EXEC
CALL "SUB28" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM SIZ3_F
* WHERE P1 = ' A' END-EXEC
CALL "SUB29" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB30" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct result is code1 not equal 0"
DISPLAY " count1 = 1"
DISPLAY " Your answer is code1=", code1
DISPLAY " count1 = ", count1
if (code1 NOT = 0 AND count1 = 1) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0364','pass','MCO') END-EXEC
CALL "SUB31" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0364','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB32" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr018.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB33" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0364 *************************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
¤ Dauer der Verarbeitung: 0.20 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
