|
IDENTIFICATION DIVISION.
PROGRAM-ID. CDR019.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "CDR019.SCO") calling SQL
* procedures in file "CDR019.MCO"
****************************************************************
*
* COMMENT SECTION
*
* DATE 1989/04/07 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* CDR019.SCO
* WRITTEN BY: SUN DAJUN
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* THIS ROUTINE TESTS THE REFERENTIAL INTEGRITY CONSTRAINT FOR
* SQL.
*
* REFERENCES
* AMERICAN NATIONAL STANDARD database language - SQL
* with Integrity Enhancement
*
* SECTION 6.7 <referential constraint definition>
* <referential constraint definition>::=
* FOREIGN KEY (<referencing columns>)
* <references specification>
* <references specification>::=
* REFERENCES <referenced table and columns>
* <referencing columns>::=
* <reference column list>
* <refereced table and columns>::=
* <table name>((<reference column list>
* <reference column list>::=
* <column name>({,<column name>}...)
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQLCODE PIC S9(9) COMP.
01 errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 code1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 code2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* date_time declaration *
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
PROCEDURE DIVISION.
P0.
MOVE "SUN" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
CALL "AUTHCK" USING SQLCODE uidx
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User " uid " expected."
DISPLAY "User " uidx " connected."
DISPLAY " "
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, cdr019.sco"
DISPLAY " "
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
DISPLAY " "
* date_time print *
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0365 *******************
* insert row into FOREIGN KEY TABLE EMP, check
* referential integrity. TABLE EMP is also a PRIMARY
* KEY TABLE to EXPERIENCE TABLE
DISPLAY " TEST0365 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " INSERT INTO EMP VALUES"
DISPLAY " (41,'Tom','China Architecture',"
DISPLAY " 20,'Architecture',040553);"
DISPLAY " "
DISPLAY " INSERT INTO DEPT VALUES"
DISPLAY " (20,'Architecture','Richard');"
DISPLAY " "
DISPLAY " INSERT INTO EMP VALUES"
DISPLAY " (41,'Tom','China Architecture',"
DISPLAY " 20,'Architecture',040553);"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1 FROM EMP"
DISPLAY " WHERE ENO = 41;"
DISPLAY " "
COMPUTE count1 = -1
* EXEC SQL INSERT INTO EMP VALUES
* (41,'Tom','China Architecture',
* 20,'Architecture',040553) END-EXEC
CALL "SUB1" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL INSERT INTO DEPT VALUES
* (20,'Architecture','Richard') END-EXEC
CALL "SUB2" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO EMP VALUES
* (41,'Tom','China Architecture',
* 20,'Architecture',040553) END-EXEC
CALL "SUB3" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code2
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM EMP
* WHERE ENO = 41 END-EXEC
CALL "SUB4" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB5" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " code1 is less than 0."
DISPLAY " code2 is equal to 0."
DISPLAY " count1 is 1"
DISPLAY " Your answer is :"
DISPLAY " code1 is ", code1
DISPLAY " code2 is ", code2
DISPLAY " count1 is ", count1
if (code1 < 0 AND count1 = 1 AND code2 = 0) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0365','pass','MCO') END-EXEC
CALL "SUB6" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0365','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB7" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr019.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB8" USING SQLCODE
MOVE SQLCODE TO SQL-COD
**************** END TEST 0365 **********
******************** BEGIN TEST0366 *******************
* insert row into PRIMARY KEY TABLE EMP, check
* referential integrity. TABLE EMP is also a FOREIGN
* KEY TABLE to TABLE DEPT
DISPLAY " TEST0366 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " DELETE FROM EMP"
DISPLAY " WHERE ENO = 21;"
DISPLAY " "
DISPLAY " DELETE FROM EXPERIENCE"
DISPLAY " WHERE EXP_NAME = 'Tom' AND BTH_DATE=040523;"
DISPLAY " "
DISPLAY " DELETE FROM EMP"
DISPLAY " WHERE ENO = 21;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1 FROM EMP"
DISPLAY " WHERE ENO = 21;"
COMPUTE count1 = -1
* EXEC SQL DELETE FROM EMP
* WHERE ENO = 21 END-EXEC
CALL "SUB9" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL DELETE FROM EXPERIENCE
* WHERE EXP_NAME = 'Tom' AND BTH_DATE = 040523 END-EXEC
CALL "SUB10" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DELETE FROM EMP
* WHERE ENO = 21 END-EXEC
CALL "SUB11" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code2
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM EMP
* WHERE ENO = 21 END-EXEC
CALL "SUB12" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB13" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " code1 is not equal to 0."
DISPLAY " code2 is equal to 0."
DISPLAY " count1 is 0"
DISPLAY " Your answer is :"
DISPLAY " code1 is ", code1
DISPLAY " code2 is ", code2
DISPLAY " count1 is ", count1
if (code1 NOT = 0 AND count1 = 0 AND code2 = 0)
then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0366','pass','MCO') END-EXEC
CALL "SUB14" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0366','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB15" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr019.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB16" USING SQLCODE
MOVE SQLCODE TO SQL-COD
**************** END TEST 0366 **********
******************** BEGIN TEST0367 *******************
* Update middle table, check the effect of this table
* as both PRIMARY TABLE (to upper level) and FOREIGN
* TABLE (to lower level).
DISPLAY " TEST0367 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " UPDATE EMP"
DISPLAY " SET ENAME = 'Thomas'"
DISPLAY " WHERE ENO = 21;"
DISPLAY " "
DISPLAY " UPDATE EMP"
DISPLAY " SET DNAME = 'Agriculture'"
DISPLAY " WHERE ENO = 21;"
DISPLAY " "
DISPLAY " UPDATE EMP"
DISPLAY " SET DNAME = 'Education'"
DISPLAY " WHERE ENO = 21;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM EMP"
DISPLAY " WHERE DNO = 12 AND DNAME = 'Education'"
DISPLAY " AND ENO = 21 AND ENAME = 'Tom';"
DISPLAY " "
COMPUTE count1 = -1
* EXEC SQL UPDATE EMP
* SET ENAME = 'Thomas'
* WHERE ENO = 21 END-EXEC
CALL "SUB17" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL UPDATE EMP
* SET DNAME = 'Agriculture'
* WHERE ENO = 21 END-EXEC
CALL "SUB18" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code2
* EXEC SQL UPDATE EMP
* SET DNAME = 'Education'
* WHERE ENO = 21 END-EXEC
CALL "SUB19" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM EMP
* WHERE DNO = 12 AND DNAME = 'Education'
* AND ENO = 21 AND ENAME = 'Tom' END-EXEC
CALL "SUB20" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB21" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " code1 is not equal to 0."
DISPLAY " code2 is not equal to 0."
DISPLAY " count1 is 1"
DISPLAY " Your answer is :"
DISPLAY " code1 is ", code1
DISPLAY " code2 is ", code2
DISPLAY " count1 is ", count1
if (code1 < 0 AND code2 < 0 AND count1 = 1) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0367','pass','MCO') END-EXEC
CALL "SUB22" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0367','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB23" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr019.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB24" USING SQLCODE
MOVE SQLCODE TO SQL-COD
************************ END TEST0367 ************************
******************** BEGIN TEST0368 *******************
*The employee Tom in EMP, his name is changed into
*Thomas, this will affect the integrity.
DISPLAY " TEST0368 "
DISPLAY " PRIMARY KEY & FOREIGN KEY "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6,6.7"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " UPDATE EMP"
DISPLAY " SET ENAME = 'Thomas'"
DISPLAY " WHERE ENO = 21;"
DISPLAY " "
DISPLAY " INSERT INTO EMP VALUES"
DISPLAY " (30,'Thomas','Languages & Operating
- " System',"
DISPLAY " 12,'Computer',040523);"
DISPLAY " "
DISPLAY " UPDATE EXPERIENCE"
DISPLAY " SET EXP_NAME = 'Thomas'"
DISPLAY " WHERE EXP_NAME = 'Tom' AND BTH_DATE=040523;"
DISPLAY " "
DISPLAY " DELETE EMP"
DISPLAY " WHERE ENO = 21;"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM EMP"
DISPLAY " WHERE DNO = 12 AND ENO = 21 "
DISPLAY " AND ENAME = 'Tom';"
DISPLAY " "
COMPUTE count1 = -1
* EXEC SQL UPDATE EMP
* SET ENAME = 'Thomas'
* WHERE ENO = 21 END-EXEC
CALL "SUB25" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL INSERT INTO EMP VALUES
* (30,'Thomas','Languages & Operating System',
* 12,'Computer',040523) END-EXEC
CALL "SUB26" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL UPDATE EXPERIENCE
* SET EXP_NAME = 'Thomas'
* WHERE EXP_NAME = 'Tom' AND BTH_DATE = 040523 END-EXEC
CALL "SUB27" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code2
* EXEC SQL DELETE FROM EMP
* WHERE ENO = 21 END-EXEC
CALL "SUB28" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM EMP
* WHERE DNO = 12 AND ENO = 21
* AND ENAME = 'Tom' END-EXEC
CALL "SUB29" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB30" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " code1 is not equal to 0."
DISPLAY " code2 is equal to 0."
DISPLAY " count1 is 0"
DISPLAY " Your answer is :"
DISPLAY " code1 is ", code1
DISPLAY " code2 is ", code2
DISPLAY " count1 is ", count1
if (code1 < 0 AND code2 = 0 AND count1 = 0) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0368','pass','MCO') END-EXEC
CALL "SUB31" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0368','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB32" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr019.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB33" USING SQLCODE
MOVE SQLCODE TO SQL-COD
************************ END TEST0368 ************************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
¤ Dauer der Verarbeitung: 0.26 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
