|
IDENTIFICATION DIVISION.
PROGRAM-ID. CDR027.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "CDR027.SCO") calling SQL
* procedures in file "CDR027.MCO".
* STANDARD COBOL (file "CDR027.SCO")
****************************************************************
*
* COMMENT SECTION
*
* DATE 1991/07/30 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* CDR027.SCO
* WRITTEN BY: YOLANDA HERD
*
* MISCELLANEOUS
*
* REFERENCES
* AMERICAN NATIONAL STANDARD database language -
* X3.135-1989
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 GRDE PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 count2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 NME PIC X(20).
01 indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
* EXEC SQL END DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 flag1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* date_time declaration *
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
PROCEDURE DIVISION.
P0.
MOVE "SUN" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT
* USER INTO :uidx FROM SUN.ECCO;
CALL "SUB1" USING SQLCODE uidx
if (uid NOT = uidx) then
DISPLAY "ERROR: User " uid " expected."
DISPLAY "User " uidx " connected."
DISPLAY " "
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, cdr027.sco"
DISPLAY " "
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
DISPLAY " "
* date_time print *
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0446 *******************
DISPLAY " TEST0446 "
DISPLAY " Table CHECK constraint allows unknown (NULL)"
DISPLAY " Reference: ANSI X3.168-1989 6.8 GR1"
DISPLAY "- - - - - - - - - - - - - - - - - - - - - - -"
* EXEC SQL DELETE FROM STAFF5;
CALL "SUB2" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF5
* VALUES('E7','Mimi',NULL,'Miami');
CALL "SUB3" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after INSERT #1 STAFF5 = ", SQL-COD
COMPUTE indic1 = -1
MOVE 15 TO GRDE
* EXEC SQL INSERT INTO STAFF5
* VALUES('E8','Joe',:GRDE:indic1,'Boston');
CALL "SUB4" USING SQLCODE GRDE indic1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after INSERT #2 STAFF5 = ", SQL-COD
* EXEC SQL INSERT INTO STAFF5(EMPNUM) VALUES('E9');
CALL "SUB5" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after INSERT #3 STAFF5 = ", SQL-COD
* EXEC SQL UPDATE STAFF
* SET GRADE = NULL
* WHERE EMPNUM = 'E1';
CALL "SUB6" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after UPDATE STAFF 'E1' = ", SQL-COD
* EXEC SQL INSERT INTO STAFF5
* SELECT *
* FROM STAFF;
CALL "SUB7" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after INSERT #4 STAFF5 = ", SQL-COD
* EXEC SQL UPDATE STAFF5
* SET GRADE = NULL
* WHERE EMPNUM = 'E2';
CALL "SUB8" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after UPDATE STAFF5 'E2' = ", SQL-COD
MOVE 13 TO GRDE
COMPUTE indic1 = -1
* EXEC SQL UPDATE STAFF5
* SET GRADE = :GRDE:indic1
* WHERE EMPNUM = 'E4';
CALL "SUB9" USING SQLCODE GRDE indic1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after UPDATE STAFF5 'E4' = ", SQL-COD
MOVE 0 TO count1
MOVE 0 TO count2
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM STAFF5;
CALL "SUB10" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT COUNT(*) INTO :count2
* FROM STAFF5
* WHERE GRADE IS NULL;
CALL "SUB11" USING SQLCODE count2
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB12" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " "
DISPLAY " The correct answers are:"
DISPLAY " count1 = 8 and count2 = 6"
DISPLAY " "
DISPLAY " Your answers are:"
DISPLAY " count1 = ", count1 " and count2 = ", count2
if (count1 = 8 AND count2 = 6) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0446','pass','MCO');
CALL "SUB13" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " cdr027.sco *** fail *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0446','fail','MCO');
CALL "SUB14" USING SQLCODE
ADD 1 TO errcnt
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"===================================================="
* EXEC SQL COMMIT WORK;
CALL "SUB15" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0446 *******************
******************** BEGIN TEST0447 *******************
DISPLAY " TEST0447 "
DISPLAY " with Check Constraint and Check Option"
DISPLAY " Reference: ANSI X3.168-1989 6.8 GR1, 6.9 GR3 a) "
DISPLAY "- - - - - - - - - - - - - - - - - - - - - - - - -"
MOVE 0 TO count1
MOVE 0 TO count2
MOVE "XXXXX" TO NME
MOVE 0 TO flag1
* EXEC SQL DELETE FROM STAFF6;
CALL "SUB16" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF6_WITH_GRADES
* VALUES('X1','Vicki',NULL,'Houston');
CALL "SUB17" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after INSERT STAFF6_WITH_GRADES = ",
SQL-COD
if (SQLCODE NOT < 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL INSERT INTO STAFF6
* VALUES('X2','Tina',NULL,'Orlando');
CALL "SUB18" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after INSERT STAFF6 = ", SQL-COD
if (SQLCODE NOT = 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM STAFF6_WITH_GRADES;
CALL "SUB19" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT COUNT(*) INTO :count2
* FROM STAFF6;
CALL "SUB20" USING SQLCODE count2
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT EMPNAME INTO :NME
* FROM STAFF6
* WHERE GRADE IS NULL;
CALL "SUB21" USING SQLCODE NME
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB22" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if (NME NOT = "Tina ") then
MOVE 1 TO flag1
END-IF
DISPLAY " "
DISPLAY "The correct answers are:"
DISPLAY " count1 = 0, count2 = 1, flag1 = 0"
DISPLAY " "
DISPLAY "Your answers are:"
DISPLAY " count1 = ", count1 ", count2 = ", count2 ", flag1
- " = ", flag1
DISPLAY " "
if (count1 = 0 AND count2 = 1 AND flag1 = 0)
then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0447','pass','MCO');
CALL "SUB23" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " cdr027.sco *** fail *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0447','fail','MCO');
CALL "SUB24" USING SQLCODE
ADD 1 TO errcnt
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"===================================================="
* EXEC SQL COMMIT WORK;
CALL "SUB25" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0447 *******************
******************** BEGIN TEST0448 *******************
DISPLAY " TEST0448 "
DISPLAY " Primary Key Implies UNIQUE"
DISPLAY " Reference: X3.135-1989 GR 2"
DISPLAY "- - - - - - - - - - - - - - - - - -"
MOVE 0 TO count1
MOVE 0 TO flag1
* EXEC SQL DELETE FROM STAFF9;
CALL "SUB26" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF9(EMPNUM,EMPNAME)
* VALUES('D1','Muddley');
CALL "SUB27" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after INSERT #1 STAFF9 = ", SQL-COD
if (SQLCODE NOT = 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL INSERT INTO STAFF9(EMPNUM,EMPNAME)
* VALUES('D1','Muddley');
CALL "SUB28" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after INSERT #2 STAFF9 = ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL INSERT INTO STAFF9(EMPNUM,EMPNAME)
* VALUES('d1','Muddley');
CALL "SUB29" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after INSERT #3 STAFF9 = ", SQL-COD
if (SQLCODE NOT = 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM STAFF9;
CALL "SUB30" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB31" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "The correct answers are:"
DISPLAY " flag1 = 0 and count1 = 2"
DISPLAY " "
DISPLAY "Your answers are:"
DISPLAY " flag1 = ", flag1 " and count1 = ", count1
DISPLAY " "
if (flag1 = 0 AND count1 = 2) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0448','pass','MCO');
CALL "SUB32" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " cdr027.sco *** fail *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0448','fail','MCO');
CALL "SUB33" USING SQLCODE
ADD 1 TO errcnt
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"===================================================="
* EXEC SQL COMMIT WORK;
CALL "SUB34" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0448 *******************
******************** BEGIN TEST0449 *******************
DISPLAY " TEST0449 "
DISPLAY " Check Constraint Definition is Case Sensitive"
DISPLAY " Reference: 6.8 GR1, 5.11 GR 6, 5.1
- " format> "
DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - -
- " - - -"
MOVE 0 TO count1
MOVE 0 TO flag1
* EXEC SQL DELETE FROM STAFF9;
CALL "SUB35" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF9(EMPNUM,EMPNAME)
* VALUES('Z1','Tina');
CALL "SUB36" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after INSERT #1 STAFF9 = ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL INSERT INTO STAFF9(EMPNUM,EMPNAME)
* VALUES('Z2','tina');
CALL "SUB37" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after INSERT #2 STAFF9 = ", SQL-COD
if (SQLCODE NOT = 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL INSERT INTO STAFF9(EMPNUM,EMPNAME)
* VALUES('Z3','ANTHONY');
CALL "SUB38" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after INSERT #3 STAFF9 = ", SQL-COD
if (SQLCODE NOT = 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM STAFF9;
CALL "SUB39" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB40" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " "
DISPLAY "The correct answers are:"
DISPLAY " flag1 = 0 and count1 = 2"
DISPLAY " "
DISPLAY "Your answers are:"
DISPLAY " flag1 = ", flag1 " and count1 = ", count1
if (flag1 = 0 AND count1 = 2) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0449','pass','MCO');
CALL "SUB41" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " cdr027.sco *** fail *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0449','fail','MCO');
CALL "SUB42" USING SQLCODE
ADD 1 TO errcnt
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"===================================================="
* EXEC SQL COMMIT WORK;
CALL "SUB43" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0449 *******************
******************** BEGIN TEST0450 *******************
DISPLAY " TEST0450 "
DISPLAY " Referential Integrity is Case Sensitive"
DISPLAY " Reference: 5.11 GR6, 5.1 , 6.7
- " GR 1a) "
DISPLAY "- - - - - - - - - - - - - - - - - - - - - - - - -
- " - - - - -"
MOVE 0 TO flag1
* EXEC SQL INSERT INTO DEPT
* VALUES(11,'VOLLEYBALL','VICKI');
CALL "SUB44" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "insert parent(setup), SQLCODE = ", SQL-COD
if (SQLCODE NOT = 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL INSERT INTO DEPT
* VALUES(10,'volleyball','vicki');
CALL "SUB45" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "insert lower case value of parent(setup), SQLCODE
- " = ", SQL-COD
if (SQLCODE NOT = 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL INSERT INTO EMP
* VALUES(13,'MARY','Dancer',15,'VOLLEYBALL',010101)
* ;
CALL "SUB46" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "insert child(setup), SQLCODE = ", SQL-COD
if (SQLCODE NOT = 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL DELETE FROM DEPT
* WHERE DNO = 10;
CALL "SUB47" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after delete parent = ", SQL-COD
if (SQLCODE NOT = 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL UPDATE DEPT
* SET DNAME = 'EDUCATION'
* WHERE DNAME = 'Education';
CALL "SUB48" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after update parent = ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL INSERT INTO EMP
* VALUES(28,'BARBARA','Jogger',14,'EDUCATION',010101)
* ;
CALL "SUB49" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after insert child = ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL UPDATE EMP
* SET DNAME = 'PHYSICS'
* WHERE ENO = 25;
CALL "SUB50" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE after update child = ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 1 TO flag1
END-IF
* EXEC SQL ROLLBACK WORK;
CALL "SUB51" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " "
DISPLAY "The correct answer is:"
DISPLAY " flag1 = 0"
DISPLAY " "
DISPLAY "Your answer is:"
DISPLAY " flag1 = ", flag1
if (flag1 = 0) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0450','pass','MCO');
CALL "SUB52" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " cdr027.sco *** fail *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0450','fail','MCO');
CALL "SUB53" USING SQLCODE
ADD 1 TO errcnt
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"===================================================="
* EXEC SQL COMMIT WORK;
CALL "SUB54" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0450 *******************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
¤ Dauer der Verarbeitung: 0.25 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
