|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML024.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "DML024.SCO") calling SQL
* procedures in file "DML024.MCO"
****************************************************************
*
* COMMENT SECTION
*
* DATE 1987/08/21 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* DML024.SCO
* WRITTEN BY: HU YANPING
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* THIS ROUTINE TESTS THE SEARCH CONDITIONS FOR SQL.
*
* REFERENCES
* AMERICAN NATIONAL STANDARD database language - SQL
* X3.135-1989
*
* SECTION 5.18 <search condition>
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 EMPNO1 PIC X(3).
01 SCITY PIC X(15).
01 WEMP PIC X(3).
01 WPNUM PIC X(3).
01 ii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 uid PIC X(18).
01 uidx PIC X(18).
01 i PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQLCODE PIC S9(9) COMP.
01 errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
* date_time declaration *
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
PROCEDURE DIVISION.
P0.
MOVE "HU" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
CALL "AUTHCK" USING SQLCODE uidx
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User " uid " expected."
DISPLAY "User " uidx " connected."
DISPLAY " "
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, dml024.sco"
DISPLAY " "
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
DISPLAY " "
* date_time print *
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0108 *******************
DISPLAY " TEST0108"
DISPLAY " Reference ANSI X3.135-1989 5.18
- " GR"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "*** Select all from a table "
DISPLAY "*** SELECT EMPNUM, CITY "
DISPLAY "*** FROM STAFF "
DISPLAY "*** WHERE EMPNUM='E1' OR NOT(EMPNUM='E1') "
* EXEC SQL DECLARE S1 CURSOR FOR
* SELECT EMPNUM,CITY
* FROM STAFF
* WHERE EMPNUM='E1' OR NOT(EMPNUM='E1') END-EXEC
* EXEC SQL OPEN S1;
CALL "SUB1" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE 0 TO i
if (SQLCODE = 0) then
DISPLAY "EMPNUM CITY "
END-IF
MOVE 1 TO ii
PERFORM P50 UNTIL ii > 19
* EXEC SQL CLOSE S1;
CALL "SUB2" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( i = 5) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0108','pass','MCO') END-EXEC
CALL "SUB3" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml024.sco *** fail *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0108','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB4" USING SQLCODE
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"===================================================="
* EXEC SQL COMMIT WORK;
CALL "SUB5" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0108 *******************
******************** BEGIN TEST0109 *******************
DISPLAY " TEST0109"
DISPLAY " Reference ANSI X3.135-1989 5.18
- " GR"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "*** Select nothing from a table "
DISPLAY "*** SELECT EMPNUM, CITY "
DISPLAY "*** FROM STAFF "
DISPLAY "*** WHERE EMPNUM='E1' AND NOT(EMPNUM='E1') "
* EXEC SQL DECLARE S2 CURSOR FOR
* SELECT EMPNUM,CITY
* FROM STAFF
* WHERE EMPNUM='E1' AND NOT(EMPNUM='E1') END-EXEC
* EXEC SQL OPEN S2;
CALL "SUB6" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE 0 TO i
if (SQLCODE = 0) then
DISPLAY "EMPNUM CITY"
END-IF
MOVE 1 TO ii
PERFORM P49 UNTIL ii > 19
* EXEC SQL CLOSE S2;
CALL "SUB7" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( i = 0) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0109','pass','MCO') END-EXEC
CALL "SUB8" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml024.sco *** fail *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0109','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB9" USING SQLCODE
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"===================================================="
* EXEC SQL COMMIT WORK;
CALL "SUB10" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0109 *******************
******************** BEGIN TEST0110 *******************
DISPLAY " TEST0110"
DISPLAY " Reference ANSI X3.135-1989 5.18
- " GR"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "*** unknown OR NOT(unknown) "
DISPLAY "*** INSERT INTO WORKS "
DISPLAY "*** VALUES ('E8','P8',NULL) "
DISPLAY "*** SELECT EMPNUM,PNUM "
DISPLAY "*** FROM WORKS "
DISPLAY "*** WHERE HOURS < (SELECT HOURS FROM WORKS "
DISPLAY "*** WHERE EMPNUM = 'E8') "
DISPLAY "*** OR NOT(HOURS < (SELECT HOURS FROM WORKS "
DISPLAY "*** WHERE EMPNUM = 'E8') "
* EXEC SQL INSERT INTO WORKS
* VALUES('E8','P8',NULL) END-EXEC
CALL "SUB11" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DECLARE S3 CURSOR FOR
* SELECT EMPNUM,PNUM
* FROM WORKS
* WHERE HOURS < (SELECT HOURS FROM WORKS
* WHERE EMPNUM = 'E8')
* OR NOT(HOURS< (SELECT HOURS FROM WORKS
* WHERE EMPNUM = 'E8')) END-EXEC
* EXEC SQL OPEN S3;
CALL "SUB12" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE 0 TO i
if (SQLCODE = 0) then
DISPLAY "EMPNUM PNUM"
END-IF
MOVE 1 TO ii
PERFORM P48 UNTIL ii > 19
* EXEC SQL ROLLBACK WORK;
CALL "SUB13" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( i = 0) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0110','pass','MCO') END-EXEC
CALL "SUB14" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml024.sco *** fail *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0110','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB15" USING SQLCODE
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"===================================================="
* EXEC SQL COMMIT WORK;
CALL "SUB16" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0110 *******************
******************** BEGIN TEST0111 *******************
DISPLAY " TEST0111"
DISPLAY " Reference ANSI X3.135-1989 5.18
- " GR"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "*** unknown AND NOT(unknown) "
DISPLAY "*** SELECT EMPNUM,PNUM "
DISPLAY "*** FROM WORKS "
DISPLAY "*** WHERE HOURS < (SELECT HOURS FROM WORKS "
DISPLAY "*** WHERE EMPNUM = 'E8') "
DISPLAY "*** AND NOT(HOURS < (SELECT HOURS FROM WORKS "
DISPLAY "*** WHERE EMPNUM = 'E8') "
* EXEC SQL INSERT INTO WORKS
* VALUES('E8','P8',NULL) END-EXEC
CALL "SUB17" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DECLARE S4 CURSOR FOR
* SELECT EMPNUM,PNUM
* FROM WORKS
* WHERE HOURS < (SELECT HOURS FROM WORKS
* WHERE EMPNUM = 'E8')
* AND NOT(HOURS< (SELECT HOURS FROM WORKS
* WHERE EMPNUM = 'E8')) END-EXEC
* EXEC SQL OPEN S4;
CALL "SUB18" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE 0 TO i
if (SQLCODE = 0) then
DISPLAY "EMPNUM PNUM"
END-IF
MOVE 1 TO ii
PERFORM P47 UNTIL ii > 19
* EXEC SQL ROLLBACK WORK;
CALL "SUB19" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( i = 0) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0111','pass','MCO') END-EXEC
CALL "SUB20" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml024.sco *** fail *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0111','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB21" USING SQLCODE
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"===================================================="
* EXEC SQL COMMIT WORK;
CALL "SUB22" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0111 *******************
******************** BEGIN TEST0112 *******************
DISPLAY " TEST0112"
DISPLAY " Reference ANSI X3.135-1989 5.18
- " GR"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "*** unknown AND true "
DISPLAY "*** SELECT EMPNUM,PNUM "
DISPLAY "*** FROM WORKS "
DISPLAY "*** WHERE HOURS < (SELECT HOURS FROM WORKS "
DISPLAY "*** WHERE EMPNUM = 'E8') "
DISPLAY "*** AND HOURS IN (SELECT HOURS FROM WORKS) "
* EXEC SQL INSERT INTO WORKS
* VALUES('E8','P8',NULL) END-EXEC
CALL "SUB23" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DECLARE S5 CURSOR FOR
* SELECT EMPNUM,PNUM
* FROM WORKS
* WHERE HOURS < (SELECT HOURS FROM WORKS
* WHERE EMPNUM = 'E8')
* AND HOURS IN (SELECT HOURS FROM WORKS) END-EXEC
* EXEC SQL OPEN S5;
CALL "SUB24" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE 0 TO i
if (SQLCODE = 0) then
DISPLAY "EMPNUM PNUM"
END-IF
MOVE 1 TO ii
PERFORM P46 UNTIL ii > 19
* EXEC SQL ROLLBACK WORK;
CALL "SUB25" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( i = 0) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0112','pass','MCO') END-EXEC
CALL "SUB26" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml024.sco *** fail *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0112','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB27" USING SQLCODE
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"===================================================="
* EXEC SQL COMMIT WORK;
CALL "SUB28" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0112 *******************
******************** BEGIN TEST0113 *******************
DISPLAY " TEST0113"
DISPLAY " Reference ANSI X3.135-1989 5.18
- " GR"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "*** unknown OR true "
DISPLAY "*** SELECT EMPNUM,PNUM "
DISPLAY "*** FROM WORKS "
DISPLAY "*** WHERE HOURS < (SELECT HOURS FROM WORKS "
DISPLAY "*** WHERE EMPNUM = 'E8') "
DISPLAY "*** OR HOURS IN (SELECT HOURS FROM WORKS) "
* EXEC SQL INSERT INTO WORKS
* VALUES('E8','P8',NULL) END-EXEC
CALL "SUB29" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DECLARE S6 CURSOR FOR
* SELECT EMPNUM,PNUM
* FROM WORKS
* WHERE HOURS < (SELECT HOURS FROM WORKS
* WHERE EMPNUM = 'E8')
* OR HOURS IN (SELECT HOURS FROM WORKS) END-EXEC
* EXEC SQL OPEN S6;
CALL "SUB30" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE 0 TO i
if (SQLCODE = 0) then
DISPLAY "EMPNUM PNUM"
END-IF
MOVE 1 TO ii
PERFORM P45 UNTIL ii > 19
DISPLAY " " " SQLCODE = ", SQL-COD ", i = ", i
* EXEC SQL ROLLBACK WORK;
CALL "SUB31" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( i = 12) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0113','pass','MCO') END-EXEC
CALL "SUB32" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml024.sco *** fail *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0113','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB33" USING SQLCODE
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"===================================================="
* EXEC SQL COMMIT WORK;
CALL "SUB34" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0113 *******************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
P50.
* EXEC SQL FETCH S1 INTO
* :EMPNO1,:SCITY END-EXEC
CALL "SUB35" USING SQLCODE EMPNO1 SCITY
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
COMPUTE i = i + 1
DISPLAY EMPNO1 " ", SCITY
END-IF
ADD 1 TO ii
.
P49.
* EXEC SQL FETCH S2 INTO
* :EMPNO1,:SCITY END-EXEC
CALL "SUB36" USING SQLCODE EMPNO1 SCITY
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
COMPUTE i = i + 1
DISPLAY EMPNO1 " ", SCITY
END-IF
ADD 1 TO ii
.
P48.
* EXEC SQL FETCH S3 INTO
* :WEMP,:WPNUM END-EXEC
CALL "SUB37" USING SQLCODE WEMP WPNUM
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
COMPUTE i = i + 1
DISPLAY WEMP " ", WPNUM
END-IF
ADD 1 TO ii
.
P47.
* EXEC SQL FETCH S4 INTO
* :WEMP,:WPNUM END-EXEC
CALL "SUB38" USING SQLCODE WEMP WPNUM
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
COMPUTE i = i + 1
DISPLAY WEMP " ", WPNUM
END-IF
ADD 1 TO ii
.
P46.
* EXEC SQL FETCH S5 INTO
* :WEMP,:WPNUM END-EXEC
CALL "SUB39" USING SQLCODE WEMP WPNUM
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
COMPUTE i = i + 1
DISPLAY WEMP " ", WPNUM
END-IF
ADD 1 TO ii
.
P45.
* EXEC SQL FETCH S6 INTO
* :WEMP,:WPNUM END-EXEC
CALL "SUB40" USING SQLCODE WEMP WPNUM
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
COMPUTE i = i + 1
DISPLAY WEMP " ", WPNUM
END-IF
ADD 1 TO ii
.
¤ Dauer der Verarbeitung: 0.34 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
