|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML034.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "DML034.SCO") calling SQL
* procedures in file "DML034.MCO"
****************************************************************
*
* COMMENT SECTION
*
* DATE 1988/02/10 STANDARD STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* DML034.SCO
* WRITTEN BY: HU YANPING
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
* REVISED 1989/10/04 BY S. HURWITZ & J. SULLIVAN
*
* THIS ROUTINE TESTS THE DATA TYPES IN SQL LANGUAGE.
*
* REFERENCES
* AMERICAN NATIONAL STANDARD database language - SQL
* X3.135-1989
*
* SECTION 5.5 <data type>
*
* Database Language Embedded SQL
* X3.168-1989
* SECTION 9. <Embedded SQL Host Program>
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 count2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 D13P6 PIC S9(7)V9(6) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 uid PIC X(18).
01 uidx PIC X(18).
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQLCODE PIC S9(9) COMP.
01 errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 D13P6Q PIC -9(7).9(6) .
* date_time declaration *
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
PROCEDURE DIVISION.
P0.
MOVE "HU" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
CALL "AUTHCK" USING SQLCODE uidx
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User " uid " expected."
DISPLAY "User " uidx " connected."
DISPLAY " "
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, dml034.sco"
DISPLAY " "
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
DISPLAY " "
* date_time print *
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0088 *******************
DISPLAY " TEST0088"
DISPLAY "reference: X3.135-1989 5.5 & X3H2-87-262 9. "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY " *** CREATE TABLE GG (realtest REAL) "
DISPLAY " *** INSERT INTO GG "
DISPLAY " *** VALUES(123.4567E-2) "
DISPLAY " "
* EXEC SQL INSERT INTO GG
* VALUES(123.4567E-2) END-EXEC
CALL "SUB1" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " After INSERT SQLCODE = ", SQL-COD
MOVE -1 TO count1
MOVE -1 TO count2
* EXEC SQL SELECT COUNT ( * ) INTO :count1
* FROM GG WHERE REALTEST NOT BETWEEN 1.2345 AND 1.2346 END-EXEC
CALL "SUB2" USING SQLCODE count1
* EXEC SQL SELECT COUNT ( * ) INTO :count2
* FROM GG WHERE REALTEST BETWEEN 1.2345 AND 1.2346 END-EXEC
CALL "SUB3" USING SQLCODE count2
DISPLAY "count1 = ", count1 " *** count1 should be 0 ***"
DISPLAY "count2 = ", count2 " *** count2 should be 1 ***"
* EXEC SQL ROLLBACK WORK;
CALL "SUB4" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( count1 = 0 AND count2 = 1 ) then
DISPLAY " *** pass ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0088','pass','MCO') END-EXEC
CALL "SUB5" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml034.sco *** fail ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0088','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB6" USING SQLCODE
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"====================================================="
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB7" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0088 *******************
******************** BEGIN TEST0090 *******************
DISPLAY " TEST0090"
DISPLAY "reference: X3.135-1989 5.5 & X3H2-87-262 9. "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY " *** CREATE TABLE II (doubletest DOUBLE
- " PRECISION) "
DISPLAY " *** INSERT INTO II "
DISPLAY " *** VALUES(0.123456123456E6) "
DISPLAY " "
* EXEC SQL INSERT INTO II
* VALUES(0.123456123456E6) END-EXEC
CALL "SUB8" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " After INSERT SQLCODE = ", SQL-COD
MOVE -1 TO count1
MOVE -2 TO count2
* EXEC SQL SELECT COUNT ( * ) INTO :count1 FROM II
* WHERE DOUBLETEST BETWEEN 123456.1234 AND 123456.1235 END-EXEC
CALL "SUB9" USING SQLCODE count1
* EXEC SQL SELECT COUNT ( * ) INTO :count2 FROM II
* WHERE DOUBLETEST NOT BETWEEN 123456.1234 AND 123456.1235 END-EXEC
CALL "SUB10" USING SQLCODE count2
DISPLAY "count1 = ", count1 " *** count1 should be 1 ***"
DISPLAY "count2 = ", count2 " *** count2 should be 0 ***"
* EXEC SQL ROLLBACK WORK;
CALL "SUB11" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( count1 = 1 AND count2 = 0 ) then
DISPLAY " *** pass ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0090','pass','MCO') END-EXEC
CALL "SUB12" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml034.sco *** fail ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0090','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB13" USING SQLCODE
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"====================================================="
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB14" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0090 *******************
******************** BEGIN TEST0091 *******************
DISPLAY " TEST0091"
DISPLAY "reference: X3.135-1989 5.5 & X3H2-87-262 9. "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY " *** CREATE TABLE JJ (floattest FLOAT) "
DISPLAY " *** INSERT INTO JJ "
DISPLAY " *** VALUES(12.345678) "
DISPLAY " "
* EXEC SQL INSERT INTO JJ
* VALUES(12.345678) END-EXEC
CALL "SUB15" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " After INSERT SQLCODE = ", SQL-COD
MOVE -1 TO count1
MOVE -1 TO count2
* EXEC SQL SELECT COUNT ( * ) INTO :count1 FROM JJ
* WHERE FLOATTEST BETWEEN 12.3456 AND 12.3457 END-EXEC
CALL "SUB16" USING SQLCODE count1
* EXEC SQL SELECT COUNT ( * ) INTO :count2 FROM JJ
* WHERE FLOATTEST NOT BETWEEN 12.3456 AND 12.3457 END-EXEC
CALL "SUB17" USING SQLCODE count2
DISPLAY "count1 = ", count1, " *** count1 should be 1 ***"
DISPLAY "count2 = ", count2, " *** count2 should be 0 ***"
* EXEC SQL ROLLBACK WORK;
CALL "SUB18" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( count1 = 1 AND count2 = 0 ) then
DISPLAY " *** pass ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0091','pass','MCO') END-EXEC
CALL "SUB19" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml034.sco *** fail ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0091','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB20" USING SQLCODE
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"====================================================="
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB21" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0091 *******************
******************** BEGIN TEST0092 *******************
DISPLAY " TEST0092"
DISPLAY "reference: X3.135-1989 5.5 & X3H2-87-262 9. "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY " *** CREATE TABLE KK (floattest FLOAT(32)) "
DISPLAY " *** INSERT INTO KK "
DISPLAY " *** VALUES(123.456123456E+3) "
DISPLAY " "
* EXEC SQL INSERT INTO KK
* VALUES(123.456123456E+3) END-EXEC
CALL "SUB22" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " After INSERT SQLCODE = ", SQL-COD
MOVE -1 TO count1
MOVE -2 TO count2
* EXEC SQL SELECT COUNT ( * ) INTO :count1 FROM KK
* WHERE FLOATTEST > 123456.1234 END-EXEC
CALL "SUB23" USING SQLCODE count1
* EXEC SQL SELECT COUNT ( * ) INTO :count2 FROM KK
* WHERE FLOATTEST < 123456.1236 END-EXEC
CALL "SUB24" USING SQLCODE count2
DISPLAY "count1 = ", count1 " *** count1 should be 1 ***"
DISPLAY "count2 = ", count2 " *** count2 should be 1 ***"
* EXEC SQL ROLLBACK WORK;
CALL "SUB25" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( count1 = 1 AND count2 = 1 ) then
DISPLAY " *** pass ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0092','pass','MCO') END-EXEC
CALL "SUB26" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml034.sco *** fail ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0092','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB27" USING SQLCODE
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"====================================================="
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB28" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0092 *******************
******************** BEGIN TEST0093 *******************
DISPLAY " TEST0093"
DISPLAY "reference: X3.135-1989 5.5 & X3H2-87-262 9. "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY " *** CREATE TABLE LL (numtest NUMERIC(13,6)) "
DISPLAY " *** INSERT INTO LL "
DISPLAY " *** VALUES(123456.123456) "
DISPLAY " "
* EXEC SQL INSERT INTO LL
* VALUES(123456.123456) END-EXEC
CALL "SUB29" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " After INSERT SQLCODE = ", SQL-COD " "
MOVE 0 TO D13P6
* EXEC SQL SELECT *
* INTO :D13P6
* FROM LL END-EXEC
CALL "SUB30" USING SQLCODE D13P6
MOVE SQLCODE TO SQL-COD
MOVE D13P6 TO D13P6Q
DISPLAY " D13P6 = ", D13P6Q
DISPLAY " *** D13P6 should be 123456.123456 ***"
* EXEC SQL ROLLBACK WORK;
CALL "SUB31" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( D13P6 = 123456.123456 ) then
DISPLAY " *** pass ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0093','pass','MCO') END-EXEC
CALL "SUB32" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml034.sco *** fail ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0093','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB33" USING SQLCODE
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"====================================================="
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB34" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0093 *******************
******************** BEGIN TEST0094 *******************
DISPLAY " TEST0094 "
DISPLAY "reference: X3.135-1989 5.5 & X3H2-87-262 9. "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY " *** CREATE TABLE PP (numtest DECIMAL(13,6)) "
DISPLAY " *** INSERT INTO PP "
DISPLAY " *** VALUES(123456.123456) "
DISPLAY " "
* EXEC SQL INSERT INTO PP
* VALUES(123456.123456) END-EXEC
CALL "SUB35" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " After INSERT SQLCODE = ", SQL-COD
MOVE 0 TO D13P6
* EXEC SQL SELECT *
* INTO :D13P6
* FROM PP END-EXEC
CALL "SUB36" USING SQLCODE D13P6
MOVE SQLCODE TO SQL-COD
MOVE D13P6 TO D13P6Q
DISPLAY " D13P6 = ", D13P6Q
DISPLAY " *** D13P6 should be 123456.123456 ***"
* EXEC SQL ROLLBACK WORK;
CALL "SUB37" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( D13P6 = 123456.123456 ) then
DISPLAY " *** pass ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0094','pass','MCO') END-EXEC
CALL "SUB38" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml034.sco *** fail ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0094','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB39" USING SQLCODE
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"====================================================="
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB40" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0094 *******************
******************** BEGIN TEST0095 *******************
DISPLAY " TEST0095"
DISPLAY "reference: X3.135-1989 5.5 & X3H2-87-262 9. "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY " *** CREATE TABLE SS (numtest DEC(13,6)) "
DISPLAY " *** INSERT INTO SS "
DISPLAY " *** VALUES(123456.123456) "
DISPLAY " "
* EXEC SQL INSERT INTO SS
* VALUES(123456.123456) END-EXEC
CALL "SUB41" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " After INSERT SQLCODE = ", SQL-COD
MOVE 0 TO D13P6
* EXEC SQL SELECT *
* INTO :D13P6
* FROM SS END-EXEC
CALL "SUB42" USING SQLCODE D13P6
MOVE SQLCODE TO SQL-COD
MOVE D13P6 TO D13P6Q
DISPLAY " D13P6 = ", D13P6Q
DISPLAY " *** D13P6 should be 123456.123456 ***"
* EXEC SQL ROLLBACK WORK;
CALL "SUB43" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( D13P6 = 123456.123456 ) then
DISPLAY " *** pass ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0095','pass','MCO') END-EXEC
CALL "SUB44" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml034.sco *** fail ***"
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0095','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB45" USING SQLCODE
MOVE SQLCODE TO SQL-COD
END-IF
DISPLAY
"====================================================="
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB46" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0095 *******************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
¤ Dauer der Verarbeitung: 0.29 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
