Quellcode-Bibliothek
© Kompilation durch diese Firma
[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]
Datei:
cdr029.cob
Sprache: Unknown
IDENTIFICATION DIVISION.
PROGRAM-ID. CDR029.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "CDR029.SCO") calling SQL
* procedures in file "CDR029.MCO".
* STANDARD COBOL (file "CDR029.SCO")
****************************************************************
*
* COMMENT SECTION
*
* DATE 1992/08/06 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* CDR029.SCO
* WRITTEN BY: DAVID W. FLATER
*
* THIS ROUTINE TESTS FOR IMPLICIT JOINS AND FOR PROBLEMS
* WITH CONSTRAINTS WHICH COMPARE ONE COLUMN VALUE AGAINST
* ANOTHER.
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 uid PIC X(18).
01 uidx PIC X(18).
01 junkit PIC X(10).
01 CPNUM1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 ii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NR-TAB.
05 NORMSQ PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "SCHANZLE" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM SUN.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid " expected. User ", uidx "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Standard COBOL, cdr029.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0522 *******************
MOVE 1 TO flag
DISPLAY " TEST0522 "
DISPLAY " No implied natural join on FROM T1, T2"
DISPLAY "Reference ANSI SQL-1992 section 7.4"
DISPLAY " GR 1b"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "INSERT INTO CPBASE VALUES (0, 'Zero');"
DISPLAY "INSERT INTO CPBASE VALUES (1, 'One');"
DISPLAY "INSERT INTO CPREF VALUES (0, 'Zero 2');"
DISPLAY "INSERT INTO CPREF VALUES (1, 'One 2');"
DISPLAY "NOTE: Table CPREF references table CPBASE"
* EXEC SQL DELETE FROM CPBASE;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DELETE FROM CPREF;
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CPBASE VALUES (0, 'Zero');
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CPBASE VALUES (1, 'One');
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CPREF VALUES (0, 'Zero 2');
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CPREF VALUES (1, 'One 2');
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE count1 = -1
DISPLAY " "
DISPLAY "SELECT COUNT(*) INTO :count1"
DISPLAY " FROM CPBASE, CPREF;"
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM CPBASE, CPREF;
CALL "SUB8" USING SQLCODE SQLSTATE count1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "count1 should be 4; its value is ", count1
DISPLAY "A value of 2 would indicate that a natural join
- " was done."
if (SQLCODE NOT = 0 OR count1 NOT = 4) then
MOVE 0 TO flag
END-IF
COMPUTE count1 = -1
DISPLAY " "
DISPLAY "DECLARE KURSOR CURSOR FOR SELECT KC, JUNK2"
DISPLAY " FROM CPBASE, CPREF ORDER BY JUNK2, KC;"
DISPLAY "OPEN KURSOR;"
DISPLAY "FETCH KURSOR INTO :CPNUM1, :junkit; SEVEN TIMES"
* EXEC SQL DECLARE KURSOR CURSOR FOR SELECT KC, JUNK2
* FROM CPBASE, CPREF ORDER BY JUNK2, KC END-EXEC
* EXEC SQL OPEN KURSOR;
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE 1 TO ii
PERFORM P50 UNTIL ii > 7
DISPLAY "count1 should be 4; its value is ", count1
DISPLAY "A value of 2 would indicate that a natural join
- " was done."
if (count1 NOT = 4) then
MOVE 0 TO flag
END-IF
* EXEC SQL ROLLBACK WORK;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (flag = 1) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO SUN.TESTREPORT
* VALUES('0522','pass','MCO');
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " cdr029.sco *** fail *** "
* EXEC SQL INSERT INTO SUN.TESTREPORT
* VALUES('0522','fail','MCO');
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
* EXEC SQL COMMIT WORK;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "================================================"
******************** END TEST0522 ********************
******************** BEGIN TEST0537 *******************
MOVE 1 TO flag
DISPLAY " TEST0537 "
DISPLAY " Table check constraint: column vs. column"
DISPLAY "Reference ANSI SQL-1992 section 11.6"
DISPLAY " "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
*
* SPECIAL NOTE
*
* Do not try to shorten the test by using rollbacks instead
* of insert, commit, delete, commit. These constraints
* can be deferred until commit time.
DISPLAY " "
DISPLAY "DELETE FROM RET_CATALOG;"
DISPLAY "COMMIT WORK;"
* EXEC SQL DELETE FROM RET_CATALOG;
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB15" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*Legal
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 0, NULL, 100.00, NULL, 'D1', NULL);"
DISPLAY "COMMIT WORK;"
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 0, NULL, 100.00, NULL, 'D1', NULL);
CALL "SUB16" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE count1 = -1
DISPLAY "SELECT COUNT(*) INTO :count1 FROM RET_CATALOG;"
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM RET_CATALOG
* ;
CALL "SUB18" USING SQLCODE SQLSTATE count1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "count1 should be 1; its value is ", count1
if (SQLCODE NOT = 0 OR count1 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "DELETE FROM RET_CATALOG;"
DISPLAY "COMMIT WORK;"
* EXEC SQL DELETE FROM RET_CATALOG;
CALL "SUB19" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB20" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*Test constraint #1
DISPLAY " "
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 0, 80.00, 100.00, 20.00, 'D1', 'Jan 20
- " 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 1, 80.00, 100.00, 20.00, NULL, 'Jan 20
- " 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 2, 80.00, 100.00, 20.00, 'D1', NULL);"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 3, 80.00, 100.00, 20.00, NULL, NULL);"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 4, 80.00, 100.00, 20.00, 'F1', 'Jan 20
- " 1993');"
DISPLAY "COMMIT WORK;"
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 0, 80.00, 100.00, 20.00, 'D1', 'Jan 20 1993')
* ;
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB22" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 1, 80.00, 100.00, 20.00, NULL, 'Jan 20 1993')
* ;
CALL "SUB23" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB24" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 2, 80.00, 100.00, 20.00, 'D1', NULL);
CALL "SUB25" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB26" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 3, 80.00, 100.00, 20.00, NULL, NULL);
CALL "SUB27" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB28" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 4, 80.00, 100.00, 20.00, 'F1', 'Jan 20 1993')
* ;
CALL "SUB29" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB30" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE count1 = -1
DISPLAY "SELECT COUNT(*) INTO :count1 FROM RET_CATALOG;"
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM RET_CATALOG
* ;
CALL "SUB31" USING SQLCODE SQLSTATE count1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "count1 should be 4; its value is ", count1
if (SQLCODE NOT = 0 OR count1 NOT = 4) then
MOVE 0 TO flag
END-IF
COMPUTE count1 = -1
DISPLAY "SELECT COUNT(*) INTO :count1 FROM RET_CATALOG"
DISPLAY "WHERE PRODUCT_ID = 0;"
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM RET_CATALOG
* WHERE PRODUCT_ID = 0;
CALL "SUB32" USING SQLCODE SQLSTATE count1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "count1 should be 0; its value is ", count1
if (SQLCODE NOT = 0 OR count1 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "DELETE FROM RET_CATALOG;"
DISPLAY "COMMIT WORK;"
* EXEC SQL DELETE FROM RET_CATALOG;
CALL "SUB33" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB34" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*Test constraint #2
DISPLAY " "
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 0, 80.00, 100.00, 20.00, 'F2', 'Jan 20
- " 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 1, 80.00, 100.00, 20.00, NULL, 'Jan 20
- " 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 2, NULL, 100.00, NULL, 'F2', 'Jan 20 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 3, NULL, 100.00, NULL, NULL, 'Jan 20 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 4, 10010.00, 10110.00, 100.00, 'F2', 'Jan 20
- " 1993');"
DISPLAY "COMMIT WORK;"
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 0, 80.00, 100.00, 20.00, 'F2', 'Jan 20 1993')
* ;
CALL "SUB35" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB36" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 1, 80.00, 100.00, 20.00, NULL, 'Jan 20 1993')
* ;
CALL "SUB37" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB38" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 2, NULL, 100.00, NULL, 'F2', 'Jan 20 1993');
CALL "SUB39" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB40" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 3, NULL, 100.00, NULL, NULL, 'Jan 20 1993');
CALL "SUB41" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB42" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 4, 10010.00, 10110.00, 100.00, 'F2', 'Jan 20 1993')
* ;
CALL "SUB43" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB44" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE count1 = -1
DISPLAY "SELECT COUNT(*) INTO :count1 FROM RET_CATALOG;"
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM RET_CATALOG
* ;
CALL "SUB45" USING SQLCODE SQLSTATE count1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "count1 should be 4; its value is ", count1
if (SQLCODE NOT = 0 OR count1 NOT = 4) then
MOVE 0 TO flag
END-IF
COMPUTE count1 = -1
DISPLAY "SELECT COUNT(*) INTO :count1 FROM RET_CATALOG"
DISPLAY "WHERE PRODUCT_ID = 0;"
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM RET_CATALOG
* WHERE PRODUCT_ID = 0;
CALL "SUB46" USING SQLCODE SQLSTATE count1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "count1 should be 0; its value is ", count1
if (SQLCODE NOT = 0 OR count1 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "DELETE FROM RET_CATALOG;"
DISPLAY "COMMIT WORK;"
* EXEC SQL DELETE FROM RET_CATALOG;
CALL "SUB47" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB48" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*Test constraint #3
DISPLAY " "
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 0, 100.01, 100.00, -0.01, 'F3', 'Jan 20
- " 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 1, 80.00, NULL, NULL, 'F3', 'Jan 20 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 2, NULL, 100.00, NULL, 'F3', 'Jan 20 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 3, NULL, NULL, NULL, 'F3', 'Jan 20 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 4, 10010.00, 10110.00, 100.00, 'F3', 'Jan 20
- " 1993');"
DISPLAY "COMMIT WORK;"
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 0, 100.01, 100.00, -0.01, 'F3', 'Jan 20 1993')
* ;
CALL "SUB49" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB50" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 1, 80.00, NULL, NULL, 'F3', 'Jan 20 1993');
CALL "SUB51" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB52" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 2, NULL, 100.00, NULL, 'F3', 'Jan 20 1993');
CALL "SUB53" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB54" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 3, NULL, NULL, NULL, 'F3', 'Jan 20 1993');
CALL "SUB55" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB56" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 4, 10010.00, 10110.00, 100.00, 'F3', 'Jan 20 1993')
* ;
CALL "SUB57" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB58" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE count1 = -1
DISPLAY "SELECT COUNT(*) INTO :count1 FROM RET_CATALOG;"
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM RET_CATALOG
* ;
CALL "SUB59" USING SQLCODE SQLSTATE count1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "count1 should be 4; its value is ", count1
if (SQLCODE NOT = 0 OR count1 NOT = 4) then
MOVE 0 TO flag
END-IF
COMPUTE count1 = -1
DISPLAY "SELECT COUNT(*) INTO :count1 FROM RET_CATALOG"
DISPLAY "WHERE PRODUCT_ID = 0;"
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM RET_CATALOG
* WHERE PRODUCT_ID = 0;
CALL "SUB60" USING SQLCODE SQLSTATE count1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "count1 should be 0; its value is ", count1
if (SQLCODE NOT = 0 OR count1 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "DELETE FROM RET_CATALOG;"
DISPLAY "COMMIT WORK;"
* EXEC SQL DELETE FROM RET_CATALOG;
CALL "SUB61" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB62" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*Test constraint #4
DISPLAY " "
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 0, 100.01, 100.00, 0.00, 'F3', 'Jan 20
- " 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 1, NULL, 100.00, 20.00, 'F3', 'Jan 20 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 2, 80.00, NULL, 20.00, 'F3', 'Jan 20 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 3, 80.00, 100.00, NULL, 'F3', 'Jan 20 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 4, NULL, NULL, 20.00, 'F3', 'Jan 20 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 5, 80.00, NULL, NULL, 'F3', 'Jan 20 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 6, NULL, 100.00, NULL, 'F3', 'Jan 20 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 7, NULL, NULL, NULL, 'F3', 'Jan 20 1993');"
DISPLAY "COMMIT WORK;"
DISPLAY "INSERT INTO RET_CATALOG VALUES"
DISPLAY "(0, 8, 80.00, 100.00, 20.00, 'F3', 'Jan 20
- " 1993');"
DISPLAY "COMMIT WORK;"
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 0, 100.01, 100.00, 0.00, 'F3', 'Jan 20 1993')
* ;
CALL "SUB63" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB64" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 1, NULL, 100.00, 20.00, 'F3', 'Jan 20 1993');
CALL "SUB65" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB66" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 2, 80.00, NULL, 20.00, 'F3', 'Jan 20 1993');
CALL "SUB67" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB68" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 3, 80.00, 100.00, NULL, 'F3', 'Jan 20 1993');
CALL "SUB69" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB70" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 4, NULL, NULL, 20.00, 'F3', 'Jan 20 1993');
CALL "SUB71" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB72" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 5, 80.00, NULL, NULL, 'F3', 'Jan 20 1993');
CALL "SUB73" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB74" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 6, NULL, 100.00, NULL, 'F3', 'Jan 20 1993');
CALL "SUB75" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB76" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 7, NULL, NULL, NULL, 'F3', 'Jan 20 1993');
CALL "SUB77" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB78" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO RET_CATALOG VALUES
* (0, 8, 80.00, 100.00, 20.00, 'F3', 'Jan 20 1993')
* ;
CALL "SUB79" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB80" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE count1 = -1
DISPLAY "SELECT COUNT(*) INTO :count1 FROM RET_CATALOG;"
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM RET_CATALOG
* ;
CALL "SUB81" USING SQLCODE SQLSTATE count1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "count1 should be 8; its value is ", count1
if (SQLCODE NOT = 0 OR count1 NOT = 8) then
MOVE 0 TO flag
END-IF
COMPUTE count1 = -1
DISPLAY "SELECT COUNT(*) INTO :count1 FROM RET_CATALOG"
DISPLAY "WHERE PRODUCT_ID = 0;"
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM RET_CATALOG
* WHERE PRODUCT_ID = 0;
CALL "SUB82" USING SQLCODE SQLSTATE count1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "count1 should be 0; its value is ", count1
if (SQLCODE NOT = 0 OR count1 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "DELETE FROM RET_CATALOG;"
DISPLAY "COMMIT WORK;"
* EXEC SQL DELETE FROM RET_CATALOG;
CALL "SUB83" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB84" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (flag = 1) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO SUN.TESTREPORT
* VALUES('0537','pass','MCO');
CALL "SUB85" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " cdr029.sco *** fail *** "
* EXEC SQL INSERT INTO SUN.TESTREPORT
* VALUES('0537','fail','MCO');
CALL "SUB86" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
* EXEC SQL COMMIT WORK;
CALL "SUB87" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "================================================"
******************** END TEST0537 ********************
******************** BEGIN TEST0538 *******************
MOVE 1 TO flag
DISPLAY " TEST0538 "
DISPLAY " With check option: column vs. column"
DISPLAY "Reference ANSI SQL-1992 section 11.19"
DISPLAY " "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
*
* SPECIAL NOTE
*
* ANSI SQL-1992 section 11.19 GR12 specifies that with
* check option constraints are checked after each update.
DISPLAY " "
DISPLAY "DELETE FROM RET_CATALOG;"
DISPLAY "COMMIT WORK;"
* EXEC SQL DELETE FROM RET_CATALOG;
CALL "SUB88" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB89" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*Illegal since with check option rejects unknowns
DISPLAY " "
DISPLAY "INSERT INTO SALE_ITEMS VALUES"
DISPLAY "(0, 0, NULL, 100.00, NULL, 'D1', NULL);"
MOVE "x" TO SQLSTATE
* EXEC SQL INSERT INTO SALE_ITEMS VALUES
* (0, 0, NULL, 100.00, NULL, 'D1', NULL);
CALL "SUB90" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 44000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NR-TAB NOT = "44000") then
MOVE 0 TO flag
END-IF
DISPLAY " "
COMPUTE count1 = -1
DISPLAY "SELECT COUNT(*) INTO :count1 FROM RET_CATALOG;"
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM RET_CATALOG
* ;
CALL "SUB91" USING SQLCODE SQLSTATE count1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "count1 should be 0; its value is ", count1
if (SQLCODE NOT = 0 OR count1 NOT = 0) then
MOVE 0 TO flag
END-IF
*Illegal
DISPLAY " "
DISPLAY "INSERT INTO SALE_ITEMS VALUES"
DISPLAY "(0, 0, 80.00, 100.00, 20.00, 'D1', NULL);"
MOVE "x" TO SQLSTATE
* EXEC SQL INSERT INTO SALE_ITEMS VALUES
* (0, 0, 80.00, 100.00, 20.00, 'D1', NULL);
CALL "SUB92" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 44000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NR-TAB NOT = "44000") then
MOVE 0 TO flag
END-IF
DISPLAY " "
COMPUTE count1 = -1
DISPLAY "SELECT COUNT(*) INTO :count1 FROM RET_CATALOG;"
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM RET_CATALOG
* ;
CALL "SUB93" USING SQLCODE SQLSTATE count1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "count1 should be 0; its value is ", count1
if (SQLCODE NOT = 0 OR count1 NOT = 0) then
MOVE 0 TO flag
END-IF
*Legal
DISPLAY " "
DISPLAY "INSERT INTO SALE_ITEMS VALUES"
DISPLAY "(0, 0, 99.00, 100.00, 1.00, 'D1', NULL);"
MOVE "x" TO SQLSTATE
* EXEC SQL INSERT INTO SALE_ITEMS VALUES
* (0, 0, 99.00, 100.00, 1.00, 'D1', NULL);
CALL "SUB94" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NR-TAB NOT = "00000") then
MOVE 0 TO flag
END-IF
DISPLAY " "
COMPUTE count1 = -1
DISPLAY "SELECT COUNT(*) INTO :count1 FROM RET_CATALOG;"
* EXEC SQL SELECT COUNT(*) INTO :count1 FROM RET_CATALOG
* ;
CALL "SUB95" USING SQLCODE SQLSTATE count1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "count1 should be 1; its value is ", count1
if (SQLCODE NOT = 0 OR count1 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "DELETE FROM RET_CATALOG;"
DISPLAY "COMMIT WORK;"
* EXEC SQL DELETE FROM RET_CATALOG;
CALL "SUB96" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB97" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (flag = 1) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO SUN.TESTREPORT
* VALUES('0538','pass','MCO');
CALL "SUB98" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " cdr029.sco *** fail *** "
* EXEC SQL INSERT INTO SUN.TESTREPORT
* VALUES('0538','fail','MCO');
CALL "SUB99" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
* EXEC SQL COMMIT WORK;
CALL "SUB100" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "================================================"
******************** END TEST0538 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
P50.
* EXEC SQL FETCH KURSOR INTO :CPNUM1, :junkit;
CALL "SUB101" USING SQLCODE SQLSTATE CPNUM1 junkit
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
MOVE ii TO count1
END-IF
ADD 1 TO ii
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NR-TAB
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
MOVE 14 TO norm2
PERFORM P90 UNTIL norm2 > 36
if (NR-TAB = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
MOVE 1 TO norm2
PERFORM P89 UNTIL norm2 > 36
MOVE 5 TO norm1
*examining position 5 of char array NORMSQ
MOVE 1 TO norm2
PERFORM P88 UNTIL norm2 > 36
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQ(1) = "0" AND NORMSQ(2) = "1") then
MOVE "0" TO NORMSQ(2)
END-IF
GO TO EXIT-NOSUBCLASS
.
P90.
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
if (NORMSQ(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQ(norm1)
END-IF
ADD 1 TO norm2
.
P89.
*valid characters are 0-9, A-Z
if (NORMSQ(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQ(norm1)
END-IF
ADD 1 TO norm2
.
P88.
*valid characters are 0-9, A-Z
if (NORMSQ(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQ(norm1)
END-IF
ADD 1 TO norm2
.
EXIT-NOSUBCLASS.
EXIT.
[ Dauer der Verarbeitung: 0.22 Sekunden
(vorverarbeitet)
]
|
|
