|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML091.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "DML091.SCO") calling SQL
* procedures in file "DML091.MCO".
* STANDARD COBOL (file "DML091.SCO")
****************************************************************
*
* COMMENT SECTION
*
* DATE 1992/07/13 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* DML091.SCO
* WRITTEN BY: DAVID W. FLATER
*
* THIS ROUTINE TESTS THE SQLSTATE STATUS CODE.
*
* REFERENCES
* ANSI SQL-1992
* 22.1 SQLSTATE
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 uid PIC X(18).
01 uidx PIC X(18).
01 c1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 ch1 PIC X(1).
01 ch22 PIC X(22).
01 LONG1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 DECML-8-2 PIC S9(8)V99 DISPLAY SIGN LEADING SEPARATE.
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
* EXEC SQL END DECLARE SECTION END-EXEC
01 ii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NR-TAB.
05 NORMSQ PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "SCHANZLE" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid " expected. User ", uidx "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
MOVE 1 TO flag
DISPLAY
"SQL Test Suite, V6.0, Standard COBOL, dml091.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0497 *******************
MOVE 1 TO flag
DISPLAY " TEST0497 "
DISPLAY "SQLSTATE = 22003: data exception "
DISPLAY "(numeric value out of range)"
DISPLAY "Reference ANSI SQL-1992 section 9.2"
DISPLAY " GR 3k"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
* EXEC SQL DELETE FROM HU.P1;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL DELETE FROM FOUR_TYPES;
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*9.2 Store assignment GR3k - exact numeric
DISPLAY " "
MOVE "x" TO SQLSTATE
DISPLAY "INSERT INTO HU.P1 VALUES (100000);"
* EXEC SQL INSERT INTO HU.P1 VALUES (100000);
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
GO TO P101
END-IF
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '22003'; its value is ",
SQLSTATE
DISPLAY " "
if (SQLCODE NOT < 0 OR SQLSTATE NOT = "22003") then
MOVE 0 TO flag
END-IF
.
P101.
DISPLAY " "
MOVE "x" TO SQLSTATE
DISPLAY "INSERT INTO HU.P1 VALUES (-1000000);"
* EXEC SQL INSERT INTO HU.P1 VALUES (-1000000);
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
GO TO P111
END-IF
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '22003'; its value is ",
SQLSTATE
DISPLAY " "
if (SQLCODE NOT < 0 OR SQLSTATE NOT = "22003") then
MOVE 0 TO flag
END-IF
.
P111.
DISPLAY " "
MOVE "x" TO SQLSTATE
DISPLAY "INSERT INTO HU.P1 VALUES (-9);"
* EXEC SQL INSERT INTO HU.P1 VALUES (-9);
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '00000'; its value is ",
SQLSTATE
DISPLAY " "
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NR-TAB NOT = "00000") then
MOVE 0 TO flag
END-IF
DISPLAY " "
MOVE "x" TO SQLSTATE
DISPLAY "INSERT INTO HU.P1 VALUES (9);"
* EXEC SQL INSERT INTO HU.P1 VALUES (9);
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '00000'; its value is ",
SQLSTATE
DISPLAY " "
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NR-TAB NOT = "00000") then
MOVE 0 TO flag
END-IF
DISPLAY " "
MOVE "x" TO SQLSTATE
DISPLAY "UPDATE HU.P1 SET NUMTEST = NUMTEST + 100000;"
* EXEC SQL UPDATE HU.P1 SET NUMTEST = NUMTEST + 100000
* ;
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
GO TO P121
END-IF
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '22003'; its value is ",
SQLSTATE
DISPLAY " "
if (SQLCODE NOT < 0 OR SQLSTATE NOT = "22003") then
MOVE 0 TO flag
END-IF
.
P121.
DISPLAY " "
MOVE "x" TO SQLSTATE
MOVE 9999 TO c1
DISPLAY "UPDATE HU.P1 SET NUMTEST ="
DISPLAY
" ((1 + NUMTEST) * :c1 * :c1) WHERE NUMTEST = 100009 OR"
DISPLAY
" NUMTEST IN (SELECT GRADE - 4 FROM HU.STAFF);"
* EXEC SQL UPDATE HU.P1 SET NUMTEST =
* ((1 + NUMTEST) * :c1 * :c1) WHERE NUMTEST = 100009 OR
* NUMTEST IN (SELECT GRADE - 4 FROM HU.STAFF);
CALL "SUB9" USING SQLCODE SQLSTATE c1
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
GO TO P131
END-IF
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '22003'; its value is ",
SQLSTATE
DISPLAY " "
if (SQLCODE NOT < 0 OR SQLSTATE NOT = "22003") then
MOVE 0 TO flag
END-IF
.
P131.
DISPLAY " "
DISPLAY "DECLARE RANCID CURSOR FOR"
DISPLAY " SELECT NUMTEST FROM HU.P1;"
* EXEC SQL DECLARE RANCID CURSOR FOR
* SELECT NUMTEST FROM HU.P1 END-EXEC
MOVE "x" TO SQLSTATE
DISPLAY "OPEN RANCID;"
* EXEC SQL OPEN RANCID;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '00000'; its value is ",
SQLSTATE
DISPLAY " "
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NR-TAB NOT = "00000") then
MOVE 0 TO flag
END-IF
DISPLAY "FETCH RANCID INTO :c1;"
* EXEC SQL FETCH RANCID INTO :c1;
CALL "SUB11" USING SQLCODE SQLSTATE c1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '00000'; its value is ",
SQLSTATE
DISPLAY " "
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NR-TAB NOT = "00000") then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "UPDATE HU.P1"
DISPLAY "SET NUMTEST = NUMTEST * 200000 WHERE CURRENT OF
- " RANCID;"
* EXEC SQL UPDATE HU.P1
* SET NUMTEST = NUMTEST * 200000 WHERE CURRENT OF RANCID
* ;
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
GO TO P141
END-IF
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '22003'; its value is ",
SQLSTATE
if (SQLCODE NOT < 0 OR SQLSTATE NOT = "22003") then
MOVE 0 TO flag
END-IF
.
P141.
*9.1 Retrieval assignment GR3k - exact numeric
DISPLAY " "
DISPLAY "INSERT INTO FOUR_TYPES"
DISPLAY " VALUES (1,'X',11112222.00,.000003E-25);"
* EXEC SQL INSERT INTO FOUR_TYPES
* VALUES (1,'X',11112222.00,.000003E-25);
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY " "
MOVE "x" TO SQLSTATE
DISPLAY "SELECT T_DECIMAL INTO :c1 FROM FOUR_TYPES"
DISPLAY " WHERE T_CHAR = 'X';"
* EXEC SQL SELECT T_DECIMAL INTO :c1 FROM FOUR_TYPES
* WHERE T_CHAR = 'X';
CALL "SUB14" USING SQLCODE SQLSTATE c1
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
GO TO P152
END-IF
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '22003'; its value is ",
SQLSTATE
DISPLAY " "
if (SQLCODE NOT < 0 OR SQLSTATE NOT = "22003") then
MOVE 0 TO flag
END-IF
.
P152.
*6.12 <numeric value expression> GR 5a - division 5b
DISPLAY " "
MOVE "x" TO SQLSTATE
DISPLAY "SELECT T_DECIMAL / .000000001 INTO :LONG1"
DISPLAY " FROM FOUR_TYPES WHERE T_CHAR = 'X';"
* EXEC SQL SELECT T_DECIMAL / .000000001 INTO :LONG1
* FROM FOUR_TYPES WHERE T_CHAR = 'X';
CALL "SUB15" USING SQLCODE SQLSTATE LONG1
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
GO TO P161
END-IF
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '22003'; its value is ",
SQLSTATE
DISPLAY " "
if (SQLCODE NOT < 0 OR SQLSTATE NOT = "22003") then
MOVE 0 TO flag
END-IF
.
P161.
*6.5 <set function spec> GR 2b iv - exact numeric sum
DISPLAY " "
MOVE 1 TO ii
PERFORM P50 UNTIL ii > 50
MOVE "x" TO SQLSTATE
DISPLAY
"SELECT SUM(T_DECIMAL) INTO :DECML-8-2 FROM FOUR_TYPES;"
* EXEC SQL SELECT SUM(T_DECIMAL) INTO :DECML-8-2 FROM FOUR_TYPES
* ;
CALL "SUB16" USING SQLCODE SQLSTATE DECML-8-2
MOVE SQLCODE TO SQL-COD
if (SQLCODE = 0) then
DISPLAY "You are failing needlessly."
DISPLAY
"Increase SUM(T_DECIMAL) by performing more INSERTS."
DISPLAY "Increase the number of time P50 is performed"
DISPLAY "in the statement above PERFORM P50 until ii > 50"
END-IF
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be '22003'; its value is ",
SQLSTATE
DISPLAY " "
if (SQLCODE NOT < 0 OR SQLSTATE NOT = "22003") then
MOVE 0 TO flag
END-IF
.
P171.
* EXEC SQL ROLLBACK WORK;
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0497','pass','MCO');
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml091.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0497','fail','MCO');
CALL "SUB19" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB20" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0497 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NR-TAB
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
MOVE 14 TO norm2
PERFORM P90 UNTIL norm2 > 36
if (NR-TAB = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
MOVE 1 TO norm2
PERFORM P89 UNTIL norm2 > 36
MOVE 5 TO norm1
*examining position 5 of char array NORMSQ
MOVE 1 TO norm2
PERFORM P88 UNTIL norm2 > 36
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQ(1) = "0" AND NORMSQ(2) = "1") then
MOVE "0" TO NORMSQ(2)
END-IF
GO TO EXIT-NOSUBCLASS
.
P90.
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
if (NORMSQ(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQ(norm1)
END-IF
ADD 1 TO norm2
.
P89.
*valid characters are 0-9, A-Z
if (NORMSQ(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQ(norm1)
END-IF
ADD 1 TO norm2
.
P88.
*valid characters are 0-9, A-Z
if (NORMSQ(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQ(norm1)
END-IF
ADD 1 TO norm2
.
EXIT-NOSUBCLASS.
EXIT.
P50.
DISPLAY
"INSERT INTO FOUR_TYPES (T_DECIMAL) VALUES (-99998888.22);"
* EXEC SQL INSERT
* INTO FOUR_TYPES (T_DECIMAL) VALUES (-99998888.22)
* ;
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
ADD 1 TO ii
.
¤ Dauer der Verarbeitung: 0.16 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
