|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML150.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "DML150.SCO") calling SQL
* procedures in file "DML150.MCO".
****************************************************************
*
* COMMENT SECTION
*
* DATE 1995/2/22 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* DML150.SCO
* WRITTEN BY: Joan Sullivan
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests dynamic parameters.
*
* REFERENCES
* FIPS PUB 127-2 14.1 Transitional SQL
* ANSI SQL-1992
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ch15 PIC X(15).
01 ch20 PIC X(20).
01 ch3 PIC X(3).
01 indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic3 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic4 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 dstmt PIC X(50).
01 longst PIC X(240).
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "FLATER " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid " expected. User ", uidx "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, dml150.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0845 *******************
MOVE 1 TO flag
DISPLAY " TEST0845"
DISPLAY "Parameters and indicators in dynamic SQL
- " statement"
DISPLAY "References:"
DISPLAY " F# 1 -- Dynamic SQL"
DISPLAY " 17.6 -- preparable statements"
DISPLAY " 17.12 -- "
DISPLAY " 17.14 -- "
DISPLAY " 17.15 -- "
DISPLAY " 17.16 -- "
DISPLAY " 17.17 --
- " positioned> "
DISPLAY " 17.18 --
- " positioned> "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*dynamic parameter spec. in INSERT... VALUES
*17.6 preparable <insert statement> with 13.8 <insert column lis
DISPLAY "dstmt=""INSERT INTO HU.STAFF VALUES (?,?,?,?)"""
MOVE "INSERT INTO HU.STAFF VALUES ( ?, ?, ?, ?) "
TO dstmt
DISPLAY "PREPARE INS1 FROM :dstmt;"
* EXEC SQL PREPARE INS1 FROM :dstmt;
CALL "SUB3" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE "E6 " TO ch3
MOVE "XxXxXxXxXxXxXxXxXxXx" TO ch20
MOVE 11 TO int1
MOVE "MinneapolisPaul" TO ch15
COMPUTE indic1 = -1
MOVE 0 TO indic2
DISPLAY "ch3 = ", ch3
DISPLAY "ch20 = ", ch20
DISPLAY "int1 = ", int1
DISPLAY "ch15 = ", ch15
DISPLAY "indic1 = ", indic1
DISPLAY "indic2 = ", indic2
DISPLAY "EXECUTE INS1 USING :ch3, :ch20 :indic1,
- " :int1:indic2, :ch15;"
* EXEC SQL EXECUTE INS1 USING :ch3, :ch20 :indic1,
* :int1:indic2, :ch15;
CALL "SUB4" USING SQLCODE SQLSTATE ch3 ch20 indic1
int1 indic2 ch15
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
MOVE "xxxxxxxxxxxxxxx" TO ch15
MOVE 99 TO indic1
MOVE 99 TO indic2
DISPLAY "SELECT * INTO :ch3, :ch20:indic1, :int1 :indic2,
- " :ch15"
DISPLAY " FROM HU.STAFF WHERE EMPNUM = 'E6';"
* EXEC SQL SELECT * INTO :ch3, :ch20:indic1, :int1 :indic2,
* :ch15
* FROM HU.STAFF WHERE EMPNUM = 'E6';
CALL "SUB5" USING SQLCODE SQLSTATE ch3 ch20 indic1 int1
indic2 ch15
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "int1 should be 11; its value is ", int1
DISPLAY "ch15 should be 'MinneapolisPaul'; its value is ",
ch15
DISPLAY "indic1 should be -1; its value is ", indic1
DISPLAY "indic2 should be 0; its value is ", indic2
if (int1 NOT = 11 OR ch15 NOT = "MinneapolisPaul")
then
MOVE 0 TO flag
END-IF
if (indic1 NOT = -1 OR indic2 NOT = 0) then
MOVE 0 TO flag
END-IF
*dynamic parameter spec. in INSERT... SELECT... WHERE
*17.6 preparable <insert statement> with 13.8 <query expression>
* EXEC SQL DELETE FROM CONCATBUF;
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CONCATBUF VALUES (
* 'INSERT INTO HU.STAFF SELECT PNUM,?,?,?' ||
* ' FROM HU.PROJ'
* );
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
CALL "SUB8" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE INS2 FROM :longst;"
* EXEC SQL PREPARE INS2 FROM :longst;
CALL "SUB9" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 13 TO int1
MOVE "Madonna of the Woods" TO ch20
MOVE "MinneapolisPaul" TO ch15
MOVE 0 TO indic1
COMPUTE indic2 = -1
DISPLAY "int1 = ", int1
DISPLAY "ch20 = ", ch20
DISPLAY "ch15 = ", ch15
DISPLAY "indic1 = ", indic1
DISPLAY "indic2 = ", indic2
DISPLAY "EXECUTE INS2 USING :ch20:indic1, :int1 :indic2,
- " :ch15;"
* EXEC SQL EXECUTE INS2 USING :ch20:indic1, :int1 :indic2,
* :ch15;
CALL "SUB10" USING SQLCODE SQLSTATE ch20 indic1
int1 indic2 ch15
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF"
DISPLAY " WHERE PNUM = 'P3' AND EMPNAME = 'Madonna of
- " the Woods'"
DISPLAY " AND GRADE IS NULL AND CITY =
- " 'MinneapolisPaul';"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF
* WHERE EMPNUM = 'P3' AND EMPNAME = 'Madonna of the Woods'
* AND GRADE IS NULL AND CITY = 'MinneapolisPaul';
CALL "SUB11" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF;"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF;
CALL "SUB12" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 12; its value is ", int1
if (int1 NOT = 12) then
MOVE 0 TO flag
END-IF
*dynamic parameter spec. in 17.6 <dynamic select statement>
* EXEC SQL DELETE FROM CONCATBUF;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CONCATBUF VALUES (
* 'SELECT * FROM HU.STAFF WHERE EMPNUM = ?' ||
* ' OR EMPNAME = ? OR GRADE = ?'
* );
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
CALL "SUB15" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE SEL1 FROM :longst;"
* EXEC SQL PREPARE SEL1 FROM :longst;
CALL "SUB16" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*17.12 <dynamic declare cursor>
DISPLAY "DECLARE S1 CURSOR FOR SEL1;"
* EXEC SQL DECLARE S1 CURSOR FOR SEL1 END-EXEC
DISPLAY " "
*parameter spec. in 17.14 <dynamic open statement>
MOVE "E13" TO ch3
MOVE 11 TO int1
MOVE "Madonna of the Woods" TO ch20
MOVE 0 TO indic1
COMPUTE indic2 = -1
DISPLAY "ch3 = ", ch3
DISPLAY "ch20 = ", ch20
DISPLAY "int1 = ", int1
DISPLAY "indic1 = ", indic1
DISPLAY "indic2 = ", indic2
DISPLAY "OPEN S1 USING :ch3, :ch20:indic1, :int1:indic2;"
* EXEC SQL OPEN S1 USING :ch3, :ch20:indic1, :int1:indic2
* ;
CALL "SUB17" USING SQLCODE SQLSTATE ch3 ch20 indic1
int1 indic2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*17.15 <dynamic fetch statement>
MOVE "xxxxxxxxxxxxxxxxxxxx" TO ch20
DISPLAY "FETCH S1 INTO :ch3, :ch20:indic1, :int1:indic2,
- " :ch15;"
* EXEC SQL FETCH S1 INTO :ch3, :ch20:indic1, :int1:indic2,
* :ch15;
CALL "SUB18" USING SQLCODE SQLSTATE ch3 ch20 indic1
int1 indic2 ch15
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch20 should be 'Madonna of the Woods'; its value
- " is ", ch20
DISPLAY "indic1 should be 0; its value is ", indic1
DISPLAY "indic2 should be -1; its value is ", indic2
if (indic1 NOT = 0 OR indic2 NOT = -1) then
MOVE 0 TO flag
END-IF
if (ch20 NOT = "Madonna of the Woods") then
MOVE 0 TO flag
END-IF
DISPLAY " "
*parameter spec. in 17.18 <dynamic update statement: positioned>
COMPUTE indic1 = -1
DISPLAY "indic1 = ", indic1
DISPLAY "UPDATE HU.STAFF SET EMPNAME = :ch20:indic1 WHERE
- " CURRENT OF S1;"
* EXEC SQL UPDATE HU.STAFF SET EMPNAME = :ch20:indic1 WHERE
* CURRENT OF S1;
CALL "SUB19" USING SQLCODE SQLSTATE ch20 indic1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*17.15 <dynamic fetch statement>
MOVE "xxxxxxxxxxxxxxxxxxxx" TO ch20
DISPLAY "FETCH S1 INTO :ch3, :ch20:indic1, :int1:indic2,
- " :ch15;"
* EXEC SQL FETCH S1 INTO :ch3, :ch20:indic1, :int1:indic2,
* :ch15;
CALL "SUB20" USING SQLCODE SQLSTATE ch3 ch20 indic1
int1 indic2 ch15
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch20 should be 'Madonna of the Woods'; its value
- " is ", ch20
DISPLAY "indic1 should be 0; its value is ", indic1
DISPLAY "indic2 should be -1; its value is ", indic2
if (indic1 NOT = 0 OR indic2 NOT = -1) then
MOVE 0 TO flag
END-IF
if (ch20 NOT = "Madonna of the Woods") then
MOVE 0 TO flag
END-IF
DISPLAY " "
*17.17 <dynamic delete statement: positioned>
DISPLAY "DELETE FROM HU.STAFF WHERE CURRENT OF S1;"
* EXEC SQL DELETE FROM HU.STAFF WHERE CURRENT OF S1;
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*17.16 <dynamic close statement>
DISPLAY "CLOSE S1;"
* EXEC SQL CLOSE S1;
CALL "SUB22" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*parameter spec. in 17.14 <dynamic open statement>
MOVE "E13" TO ch3
MOVE 11 TO int1
MOVE "Madonna of the Woods" TO ch20
COMPUTE indic1 = -1
MOVE 0 TO indic2
DISPLAY "ch3 = ", ch3
DISPLAY "ch20 = ", ch20
DISPLAY "int1 = ", int1
DISPLAY "indic1 = ", indic1
DISPLAY "indic2 = ", indic2
DISPLAY "OPEN S1 USING :ch3, :ch20:indic1, :int1:indic2;"
* EXEC SQL OPEN S1 USING :ch3, :ch20:indic1, :int1:indic2
* ;
CALL "SUB23" USING SQLCODE SQLSTATE ch3 ch20 indic1
int1 indic2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*17.15 <dynamic fetch statement>
MOVE "xxxxxxxxxxxxxxxxxxxx" TO ch20
DISPLAY "FETCH S1 INTO :ch3, :ch20:indic1, :int1:indic2,
- " :ch15;"
* EXEC SQL FETCH S1 INTO :ch3, :ch20:indic1, :int1:indic2,
* :ch15;
CALL "SUB24" USING SQLCODE SQLSTATE ch3 ch20 indic1
int1 indic2 ch15
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 11; its value is ", int1
DISPLAY "indic1 should be -1; its value is ", indic1
DISPLAY "indic2 should be 0; its value is ", indic2
if (indic1 NOT = -1 OR indic2 NOT = 0 OR int1 NOT
= 11) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*parameter spec. in 17.18 <dynamic update statement: positioned>
COMPUTE indic1 = -1
DISPLAY "indic1 = ", indic1
DISPLAY "UPDATE HU.STAFF SET CITY = :ch15:indic1 WHERE
- " CURRENT OF S1;"
* EXEC SQL UPDATE HU.STAFF SET CITY = :ch15:indic1 WHERE
* CURRENT OF S1;
CALL "SUB25" USING SQLCODE SQLSTATE ch15 indic1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*17.16 <dynamic close statement>
DISPLAY "CLOSE S1;"
* EXEC SQL CLOSE S1;
CALL "SUB26" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF"
DISPLAY " WHERE EMPNAME = 'Madonna of the Woods;'"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF
* WHERE EMPNAME = 'Madonna of the Woods';
CALL "SUB27" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 4; its value is ", int1
if (int1 NOT = 4) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF"
DISPLAY " WHERE EMPNAME IS NULL"
DISPLAY " AND (CITY IS NULL OR GRADE IS NULL);"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF
* WHERE EMPNAME IS NULL
* AND (CITY IS NULL OR GRADE IS NULL);
CALL "SUB28" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
*dynamic parameter spec. in DELETE... WHERE
*17.6 preparable <delete statement: searched>
* EXEC SQL DELETE FROM CONCATBUF;
CALL "SUB29" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CONCATBUF VALUES (
* 'DELETE FROM HU.STAFF WHERE EMPNUM=?' ||
* ' OR GRADE=? OR CITY=?'
* );
CALL "SUB30" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
CALL "SUB31" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE MOD1 FROM :longst;"
* EXEC SQL PREPARE MOD1 FROM :longst;
CALL "SUB32" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE "E1 " TO ch3
MOVE 10 TO int1
MOVE "Deale " TO ch15
MOVE 0 TO indic1
COMPUTE indic2 = -1
DISPLAY "ch3 = ", ch3
DISPLAY "int1 = ", int1
DISPLAY "ch15 = ", ch15
DISPLAY "indic1 = ", indic1
DISPLAY "indic2 = ", indic2
DISPLAY "EXECUTE MOD1 USING :ch3, :int1:indic1,
- " :ch15:indic2;"
* EXEC SQL EXECUTE MOD1 USING :ch3, :int1:indic1,
* :ch15:indic2;
CALL "SUB33" USING SQLCODE SQLSTATE ch3
int1 indic1 ch15 indic2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF;"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF;
CALL "SUB34" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 9; its value is ", int1
if (int1 NOT = 9) then
MOVE 0 TO flag
END-IF
MOVE 10 TO int1
COMPUTE indic1 = -1
MOVE 0 TO indic2
DISPLAY "int1 = ", int1
DISPLAY "indic1 = ", indic1
DISPLAY "indic2 = ", indic2
DISPLAY "EXECUTE MOD1 USING :ch3, :int1:indic1,
- " :ch15:indic2;"
* EXEC SQL EXECUTE MOD1 USING :ch3, :int1:indic1,
* :ch15:indic2;
CALL "SUB35" USING SQLCODE SQLSTATE ch3
int1 indic1 ch15 indic2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF;"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF;
CALL "SUB36" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 8; its value is ", int1
if (int1 NOT = 8) then
MOVE 0 TO flag
END-IF
*dynamic parameter spec. in UPDATE.. WHERE
*17.6 preparable <update statement: searched>
* EXEC SQL DELETE FROM CONCATBUF;
CALL "SUB37" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CONCATBUF VALUES (
* 'UPDATE HU.STAFF SET EMPNAME = ?, CITY = ?' ||
* ' WHERE EMPNUM = ? OR GRADE = ?'
* );
CALL "SUB38" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
CALL "SUB39" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
*17.6 GR 6 , existing SQL statement MOD1 implicitly deallocated
DISPLAY "PREPARE MOD1 FROM :longst;"
* EXEC SQL PREPARE MOD1 FROM :longst;
CALL "SUB40" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE "E5 " TO ch3
MOVE "Flash in the pan " TO ch20
MOVE 13 TO int1
MOVE "Migrane " TO ch15
MOVE 0 TO indic1
COMPUTE indic2 = -1
MOVE 0 TO indic3
COMPUTE indic4 = -1
DISPLAY "ch3 = ", ch3
DISPLAY "ch20 = ", ch20
DISPLAY "int1 = ", int1
DISPLAY "ch15 = ", ch15
DISPLAY "indic1 = ", indic1
DISPLAY "indic2 = ", indic2
DISPLAY "indic3 = ", indic3
DISPLAY "indic4 = ", indic4
DISPLAY "EXECUTE MOD1 "
DISPLAY " USING
- " :ch20:indic1,:ch15:indic2,:ch3:indic3,:int1:indic4;"
* EXEC SQL EXECUTE MOD1 USING
* :ch20:indic1,
* :ch15:indic2,
* :ch3:indic3,
* :int1:indic4;
CALL "SUB41" USING SQLCODE SQLSTATE ch20 indic1
ch15 indic2 ch3
indic3 int1 indic4
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF"
DISPLAY " WHERE EMPNAME = 'Flash in the pan';"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF
* WHERE EMPNAME = 'Flash in the pan';
CALL "SUB42" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF"
DISPLAY " WHERE CITY = 'Migrane';"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF
* WHERE CITY = 'Migrane';
CALL "SUB43" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 0; its value is ", int1
if (int1 NOT = 0) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF"
DISPLAY " WHERE EMPNAME IS NULL;"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF
* WHERE EMPNAME IS NULL;
CALL "SUB44" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF"
DISPLAY " WHERE CITY IS NULL;"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF
* WHERE CITY IS NULL;
CALL "SUB45" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
MOVE "P4 " TO ch3
MOVE "Flash in the pan " TO ch20
MOVE 13 TO int1
MOVE "Migrane " TO ch15
COMPUTE indic1 = -1
MOVE 0 TO indic2
COMPUTE indic3 = -1
MOVE 0 TO indic4
DISPLAY "ch3 = ", ch3
DISPLAY "ch20 = ", ch20
DISPLAY "int1 = ", int1
DISPLAY "ch15 = ", ch15
DISPLAY "indic1 = ", indic1
DISPLAY "indic2 = ", indic2
DISPLAY "indic3 = ", indic3
DISPLAY "indic4 = ", indic4
DISPLAY "EXECUTE MOD1 "
DISPLAY " USING
- " :ch20:indic1,:ch15:indic2,:ch3:indic3,:int1:indic4;"
* EXEC SQL EXECUTE MOD1 USING
* :ch20:indic1,
* :ch15:indic2,
* :ch3:indic3,
* :int1:indic4;
CALL "SUB46" USING SQLCODE SQLSTATE ch20 indic1
ch15 indic2 ch3
indic3 int1 indic4
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF"
DISPLAY " WHERE EMPNAME = 'Flash in the pan';"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF
* WHERE EMPNAME = 'Flash in the pan';
CALL "SUB47" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 0; its value is ", int1
if (int1 NOT = 0) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF"
DISPLAY " WHERE CITY = 'Migrane';"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF
* WHERE CITY = 'Migrane';
CALL "SUB48" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF"
DISPLAY " WHERE EMPNAME IS NULL;"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF
* WHERE EMPNAME IS NULL;
CALL "SUB49" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 4; its value is ", int1
if (int1 NOT = 4) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM HU.STAFF"
DISPLAY " WHERE CITY IS NULL;"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM HU.STAFF
* WHERE CITY IS NULL;
CALL "SUB50" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB51" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0845','pass','MCO');
CALL "SUB52" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml150.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0845','fail','MCO');
CALL "SUB53" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB54" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0845 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
[ Verzeichnis aufwärts0.41unsichere Verbindung
Übersetzung europäischer Sprachen durch Browser
]
|
