|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML110.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "DML110.SCO") calling SQL
* procedures in file "DML110.MCO".
****************************************************************
*
* COMMENT SECTION
*
* DATE 1993/11/17 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* DML110.SCO
* WRITTEN BY: David W. Flater
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests DATETIME features in Transitional
* SQL with cursors. This is the non-dynamic version of
* DML111.
*
* REFERENCES
* FIPS PUB 127-2 14.1 Transitional SQL
* ANSI SQL-1992
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 int2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 int3 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "FLATER " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid " expected. User ", uidx "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, dml110.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0619 *******************
MOVE 1 TO flag
DISPLAY " TEST0619 "
DISPLAY " DATETIME cursor operations (static)"
DISPLAY "References:"
DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features
- " 5, 20"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "CREATE TABLE TEMPS ("
DISPLAY " ENTERED TIMESTAMP,"
DISPLAY " START DATE,"
DISPLAY " APPT INTERVAL DAY,"
DISPLAY " HOUR_IN TIME,"
DISPLAY " HOUR_OUT TIME,"
DISPLAY " LUNCH INTERVAL HOUR TO MINUTE);"
* EXEC SQL CREATE TABLE TEMPS (
* ENTERED TIMESTAMP,
* START DATE,
* APPT INTERVAL DAY,
* HOUR_IN TIME,
* HOUR_OUT TIME,
* LUNCH INTERVAL HOUR TO MINUTE);
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO TEMPS VALUES ("
DISPLAY " TIMESTAMP '1993-11-10 12:25:14',"
DISPLAY " DATE '1993-11-12',"
DISPLAY " INTERVAL '4' DAY,"
DISPLAY " TIME '08:30:00',"
DISPLAY " TIME '16:30:00',"
DISPLAY " INTERVAL '1:00' HOUR TO MINUTE);"
* EXEC SQL INSERT INTO TEMPS VALUES (
* TIMESTAMP '1993-11-10 12:25:14',
* DATE '1993-11-12',
* INTERVAL '4' DAY,
* TIME '08:30:00',
* TIME '16:30:00',
* INTERVAL '1:00' HOUR TO MINUTE);
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO TEMPS VALUES ("
DISPLAY " TIMESTAMP '1993-11-10 13:15:14',"
DISPLAY " DATE '1993-11-15',"
DISPLAY " INTERVAL '5' DAY,"
DISPLAY " TIME '08:30:00',"
DISPLAY " TIME '17:30:00',"
DISPLAY " INTERVAL '0:30' HOUR TO MINUTE);"
* EXEC SQL INSERT INTO TEMPS VALUES (
* TIMESTAMP '1993-11-10 13:15:14',
* DATE '1993-11-15',
* INTERVAL '5' DAY,
* TIME '08:30:00',
* TIME '17:30:00',
* INTERVAL '0:30' HOUR TO MINUTE);
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO TEMPS VALUES ("
DISPLAY " TIMESTAMP '1993-11-17 09:56:48',"
DISPLAY " DATE '1994-11-18',"
DISPLAY " INTERVAL '3' DAY,"
DISPLAY " TIME '09:00:00',"
DISPLAY " TIME '17:00:00',"
DISPLAY " INTERVAL '1:00' HOUR TO MINUTE);"
* EXEC SQL INSERT INTO TEMPS VALUES (
* TIMESTAMP '1993-11-17 09:56:48',
* DATE '1994-11-18',
* INTERVAL '3' DAY,
* TIME '09:00:00',
* TIME '17:00:00',
* INTERVAL '1:00' HOUR TO MINUTE);
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C11011 CURSOR FOR"
DISPLAY " SELECT EXTRACT (MINUTE FROM LUNCH) FROM TEMPS;"
* EXEC SQL DECLARE C11011 CURSOR FOR
* SELECT EXTRACT (MINUTE FROM LUNCH) FROM TEMPS END-EXEC
DISPLAY " "
DISPLAY "OPEN C11011;"
* EXEC SQL OPEN C11011;
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
MOVE 0 TO int2
MOVE 0 TO int3
DISPLAY "FETCH C11011 INTO :int1;"
* EXEC SQL FETCH C11011 INTO :int1;
CALL "SUB9" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 is ", int1
if (int1 = 0) then
COMPUTE int2 = int2 + 1
END-IF
if (int1 = 30) then
COMPUTE int3 = int3 + 1
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C11011 INTO :int1;"
* EXEC SQL FETCH C11011 INTO :int1;
CALL "SUB10" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 is ", int1
if (int1 = 0) then
COMPUTE int2 = int2 + 1
END-IF
if (int1 = 30) then
COMPUTE int3 = int3 + 1
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C11011 INTO :int1;"
* EXEC SQL FETCH C11011 INTO :int1;
CALL "SUB11" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 is ", int1
if (int1 = 0) then
COMPUTE int2 = int2 + 1
END-IF
if (int1 = 30) then
COMPUTE int3 = int3 + 1
END-IF
DISPLAY "FETCH C11011 INTO :int1;"
* EXEC SQL FETCH C11011 INTO :int1;
CALL "SUB12" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 100 OR NORMSQ NOT = "02000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY "int1 should have shown 0 twice and 30 once."
DISPLAY "There were ", int2 " 0(s) and ", int3 " 30(s)."
if (int2 NOT = 2 OR int3 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C11011;"
* EXEC SQL CLOSE C11011;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "OPEN C11011;"
* EXEC SQL OPEN C11011;
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C11011 INTO :int1;"
* EXEC SQL FETCH C11011 INTO :int1;
CALL "SUB15" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 is ", int1
DISPLAY "UPDATE TEMPS"
DISPLAY " SET LUNCH = INTERVAL '0:45' HOUR TO MINUTE"
DISPLAY " WHERE CURRENT OF C11011;"
* EXEC SQL UPDATE TEMPS
* SET LUNCH = INTERVAL '0:45' HOUR TO MINUTE
* WHERE CURRENT OF C11011;
CALL "SUB16" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "CLOSE C11011;"
* EXEC SQL CLOSE C11011;
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1"
DISPLAY " FROM TEMPS WHERE"
DISPLAY " EXTRACT (MINUTE FROM LUNCH) <> 0"
DISPLAY " AND EXTRACT (MINUTE FROM LUNCH)"
DISPLAY " <> 30;"
* EXEC SQL SELECT COUNT(*) INTO :int1
* FROM TEMPS WHERE
* EXTRACT (MINUTE FROM LUNCH) <> 0
* AND EXTRACT (MINUTE FROM LUNCH)
* <> 30;
CALL "SUB18" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1"
DISPLAY " FROM TEMPS WHERE"
DISPLAY " EXTRACT (MINUTE FROM LUNCH) = 45;"
* EXEC SQL SELECT COUNT(*) INTO :int1
* FROM TEMPS WHERE
* EXTRACT (MINUTE FROM LUNCH) = 45;
CALL "SUB19" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "DECLARE C11012 CURSOR FOR"
DISPLAY " SELECT EXTRACT (YEAR FROM ENTERED) FROM TEMPS
- " WHERE"
DISPLAY " LUNCH = INTERVAL '0:45' HOUR TO MINUTE;"
* EXEC SQL DECLARE C11012 CURSOR FOR
* SELECT EXTRACT (YEAR FROM ENTERED) FROM TEMPS WHERE
* LUNCH = INTERVAL '0:45' HOUR TO MINUTE END-EXEC
DISPLAY " "
DISPLAY "OPEN C11012;"
* EXEC SQL OPEN C11012;
CALL "SUB20" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C11012 INTO :int1;"
* EXEC SQL FETCH C11012 INTO :int1;
CALL "SUB21" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 is ", int1
DISPLAY "DELETE FROM TEMPS"
DISPLAY " WHERE CURRENT OF C11012;"
* EXEC SQL DELETE FROM TEMPS
* WHERE CURRENT OF C11012;
CALL "SUB22" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "CLOSE C11012;"
* EXEC SQL CLOSE C11012;
CALL "SUB23" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1"
DISPLAY " FROM TEMPS WHERE"
DISPLAY " EXTRACT (MINUTE FROM LUNCH) = 45;"
* EXEC SQL SELECT COUNT(*) INTO :int1
* FROM TEMPS WHERE
* EXTRACT (MINUTE FROM LUNCH) = 45;
CALL "SUB24" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 0; its value is ", int1
if (int1 NOT = 0) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1"
DISPLAY " FROM TEMPS;"
* EXEC SQL SELECT COUNT(*) INTO :int1
* FROM TEMPS;
CALL "SUB25" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB26" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE TEMPS CASCADE;"
* EXEC SQL DROP TABLE TEMPS CASCADE;
CALL "SUB27" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB28" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0619','pass','MCO');
CALL "SUB29" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml110.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0619','fail','MCO');
CALL "SUB30" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB31" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0619 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.16 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
