|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML111.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "DML111.SCO") calling SQL
* procedures in file "DML111.MCO".
****************************************************************
*
* COMMENT SECTION
*
* DATE 1993/11/17 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* DML111.SCO
* WRITTEN BY: David W. Flater
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests DATETIME features in Transitional
* SQL with cursors. This is the dynamic version of
* DML110.
*
* REFERENCES
* FIPS PUB 127-2 14.1 Transitional SQL
* ANSI SQL-1992
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 int2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 int3 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 dstmt PIC X(50).
01 longst PIC X(240).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "FLATER " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid " expected. User ", uidx "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, dml111.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0620 *******************
MOVE 1 TO flag
DISPLAY " TEST0620 "
DISPLAY " DATETIME cursor operations (dynamic)"
DISPLAY "References:"
DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features
- " 1, 5, 20"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
* EXEC SQL DELETE FROM CONCATBUF;
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CONCATBUF VALUES (
* 'CREATE TABLE TEMPS (' ||
* ' ENTERED TIMESTAMP,' ||
* ' START DATE,' ||
* ' APPT INTERVAL DAY,' ||
* ' HOUR_IN TIME,' ||
* ' HOUR_OUT TIME,' ||
* ' LUNCH INTERVAL HOUR TO MINUTE)'
* );
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
CALL "SUB5" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "EXECUTE IMMEDIATE :longst;"
* EXEC SQL EXECUTE IMMEDIATE :longst;
CALL "SUB7" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
* EXEC SQL DELETE FROM CONCATBUF;
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CONCATBUF VALUES (
* 'INSERT INTO TEMPS VALUES (' ||
* ' TIMESTAMP ''1993-11-10 12:25:14'',' ||
* ' DATE ''1993-11-12'',' ||
* ' INTERVAL ''4'' DAY,' ||
* ' TIME ''08:30:00'',' ||
* ' TIME ''16:30:00'',' ||
* ' INTERVAL ''1:00'' HOUR TO MINUTE)'
* );
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
CALL "SUB11" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "EXECUTE IMMEDIATE :longst;"
* EXEC SQL EXECUTE IMMEDIATE :longst;
CALL "SUB12" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
* EXEC SQL DELETE FROM CONCATBUF;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CONCATBUF VALUES (
* 'INSERT INTO TEMPS VALUES (' ||
* ' TIMESTAMP ''1993-11-10 13:15:14'',' ||
* ' DATE ''1993-11-15'',' ||
* ' INTERVAL ''5'' DAY,' ||
* ' TIME ''08:30:00'',' ||
* ' TIME ''17:30:00'',' ||
* ' INTERVAL ''0:30'' HOUR TO MINUTE)'
* );
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
CALL "SUB15" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "EXECUTE IMMEDIATE :longst;"
* EXEC SQL EXECUTE IMMEDIATE :longst;
CALL "SUB16" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
* EXEC SQL DELETE FROM CONCATBUF;
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CONCATBUF VALUES (
* 'INSERT INTO TEMPS VALUES (' ||
* ' TIMESTAMP ''1993-11-17 09:56:48'',' ||
* ' DATE ''1994-11-18'',' ||
* ' INTERVAL ''3'' DAY,' ||
* ' TIME ''09:00:00'',' ||
* ' TIME ''17:00:00'',' ||
* ' INTERVAL ''1:00'' HOUR TO MINUTE)'
* );
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
CALL "SUB19" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "EXECUTE IMMEDIATE :longst;"
* EXEC SQL EXECUTE IMMEDIATE :longst;
CALL "SUB20" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "dstmt=""SELECT EXTRACT (MINUTE FROM LUNCH) FROM
- " TEMPS"""
MOVE "SELECT EXTRACT (MINUTE FROM LUNCH) FROM TEMPS "
TO dstmt
DISPLAY "PREPARE S11111 FROM :dstmt;"
* EXEC SQL PREPARE S11111 FROM :dstmt;
CALL "SUB21" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C11111 CURSOR FOR S11111;"
* EXEC SQL DECLARE C11111 CURSOR FOR S11111 END-EXEC
DISPLAY " "
DISPLAY "OPEN C11111;"
* EXEC SQL OPEN C11111;
CALL "SUB22" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
MOVE 0 TO int2
MOVE 0 TO int3
DISPLAY "FETCH C11111 INTO :int1;"
* EXEC SQL FETCH C11111 INTO :int1;
CALL "SUB23" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 is ", int1
if (int1 = 0) then
COMPUTE int2 = int2 + 1
END-IF
if (int1 = 30) then
COMPUTE int3 = int3 + 1
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C11111 INTO :int1;"
* EXEC SQL FETCH C11111 INTO :int1;
CALL "SUB24" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 is ", int1
if (int1 = 0) then
COMPUTE int2 = int2 + 1
END-IF
if (int1 = 30) then
COMPUTE int3 = int3 + 1
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C11111 INTO :int1;"
* EXEC SQL FETCH C11111 INTO :int1;
CALL "SUB25" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 is ", int1
if (int1 = 0) then
COMPUTE int2 = int2 + 1
END-IF
if (int1 = 30) then
COMPUTE int3 = int3 + 1
END-IF
DISPLAY "FETCH C11111 INTO :int1;"
* EXEC SQL FETCH C11111 INTO :int1;
CALL "SUB26" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 100 OR NORMSQ NOT = "02000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY "int1 should have shown 0 twice and 30 once."
DISPLAY "There were ", int2 " 0(s) and ", int3 " 30(s)."
if (int2 NOT = 2 OR int3 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C11111;"
* EXEC SQL CLOSE C11111;
CALL "SUB27" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "OPEN C11111;"
* EXEC SQL OPEN C11111;
CALL "SUB22" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C11111 INTO :int1;"
* EXEC SQL FETCH C11111 INTO :int1;
CALL "SUB29" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 is ", int1
*<preparable dynamic update statement: positioned> is Full SQL
*Jim Melton says that the "dynamic" positioned updates and
*deletes have to pass the compiler despite the unquoted presence
*of a table name that isn't known at compile time.
DISPLAY "UPDATE TEMPS"
DISPLAY " SET LUNCH = INTERVAL '0:45' HOUR TO MINUTE"
DISPLAY " WHERE CURRENT OF C11111;"
* EXEC SQL UPDATE TEMPS
* SET LUNCH = INTERVAL '0:45' HOUR TO MINUTE
* WHERE CURRENT OF C11111;
CALL "SUB30" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "CLOSE C11111;"
* EXEC SQL CLOSE C11111;
CALL "SUB31" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
* EXEC SQL DELETE FROM CONCATBUF;
CALL "SUB32" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CONCATBUF VALUES (
* 'SELECT COUNT(*) FROM TEMPS WHERE' ||
* ' EXTRACT (MINUTE FROM LUNCH) <> 0' ||
* ' AND EXTRACT (MINUTE FROM LUNCH) <> 30'
* );
CALL "SUB33" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
CALL "SUB34" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S11113 FROM :longst;"
* EXEC SQL PREPARE S11113 FROM :longst;
CALL "SUB35" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C11113 CURSOR FOR S11113;"
* EXEC SQL DECLARE C11113 CURSOR FOR S11113 END-EXEC
DISPLAY " "
DISPLAY "OPEN C11113;"
* EXEC SQL OPEN C11113;
CALL "SUB36" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C11113 INTO :int1;"
* EXEC SQL FETCH C11113 INTO :int1;
CALL "SUB37" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C11113;"
* EXEC SQL CLOSE C11113;
CALL "SUB38" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
* EXEC SQL DELETE FROM CONCATBUF;
CALL "SUB39" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CONCATBUF VALUES (
* 'SELECT COUNT(*) FROM TEMPS WHERE' ||
* ' EXTRACT (MINUTE FROM LUNCH) = 45'
* );
CALL "SUB40" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
CALL "SUB41" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S11114 FROM :longst;"
* EXEC SQL PREPARE S11114 FROM :longst;
CALL "SUB42" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C11114 CURSOR FOR S11114;"
* EXEC SQL DECLARE C11114 CURSOR FOR S11114 END-EXEC
DISPLAY " "
DISPLAY "OPEN C11114;"
* EXEC SQL OPEN C11114;
CALL "SUB43" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C11114 INTO :int1;"
* EXEC SQL FETCH C11114 INTO :int1;
CALL "SUB44" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C11114;"
* EXEC SQL CLOSE C11114;
CALL "SUB45" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
* EXEC SQL DELETE FROM CONCATBUF;
CALL "SUB46" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CONCATBUF VALUES (
* 'SELECT EXTRACT (YEAR FROM ENTERED) FROM TEMPS WHERE' ||
* ' LUNCH = INTERVAL ''0:45'' HOUR TO MINUTE'
* );
CALL "SUB47" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
CALL "SUB48" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S11115 FROM :longst;"
* EXEC SQL PREPARE S11115 FROM :longst;
CALL "SUB49" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C11115 CURSOR FOR S11115;"
* EXEC SQL DECLARE C11115 CURSOR FOR S11115 END-EXEC
DISPLAY " "
DISPLAY "OPEN C11115;"
* EXEC SQL OPEN C11115;
CALL "SUB50" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C11115 INTO :int1;"
* EXEC SQL FETCH C11115 INTO :int1;
CALL "SUB51" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 is ", int1
*Jim Melton says that the "dynamic" positioned updates and
*deletes have to pass the compiler despite the unquoted presence
*of a table name that isn't known at compile time.
DISPLAY "DELETE FROM TEMPS"
DISPLAY " WHERE CURRENT OF C11115;"
* EXEC SQL DELETE FROM TEMPS
* WHERE CURRENT OF C11115;
CALL "SUB52" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "CLOSE C11115;"
* EXEC SQL CLOSE C11115;
CALL "SUB53" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "OPEN C11114;"
* EXEC SQL OPEN C11114;
CALL "SUB43" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C11114 INTO :int1;"
* EXEC SQL FETCH C11114 INTO :int1;
CALL "SUB55" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 0; its value is ", int1
if (int1 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C11114;"
* EXEC SQL CLOSE C11114;
CALL "SUB56" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "dstmt=""SELECT COUNT(*) FROM TEMPS"""
MOVE "SELECT COUNT(*) FROM TEMPS
- " " TO dstmt
DISPLAY "PREPARE S11116 FROM :dstmt;"
* EXEC SQL PREPARE S11116 FROM :dstmt;
CALL "SUB57" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C11116 CURSOR FOR S11116;"
* EXEC SQL DECLARE C11116 CURSOR FOR S11116 END-EXEC
DISPLAY " "
DISPLAY "OPEN C11116;"
* EXEC SQL OPEN C11116;
CALL "SUB58" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C11116 INTO :int1;"
* EXEC SQL FETCH C11116 INTO :int1;
CALL "SUB59" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB60" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "dstmt=""DROP TABLE TEMPS CASCADE"""
MOVE "DROP TABLE TEMPS CASCADE "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB61" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB62" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0620','pass','MCO');
CALL "SUB63" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml111.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0620','fail','MCO');
CALL "SUB64" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB65" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0620 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.33 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
