|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML142.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "DML142.SCO") calling SQL
* procedures in file "DML142.MCO".
****************************************************************
*
* COMMENT SECTION
*
* DATE 1994/11/1 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* DML142.SCO
* WRITTEN BY: David Flater
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests privilege violations by user HU and
* cursor operations on tables with duplicate rows.
*
* REFERENCES
* ANSI SQL-1992
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 c10 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 c12 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 c13 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 cxx PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "HU " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid " expected. User ", uidx "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, dml142.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0527 *******************
MOVE 1 TO flag
DISPLAY " TEST0527 "
DISPLAY " Priv. violation: HU"
DISPLAY "References:"
DISPLAY " 6.3 AR.1 -- Access rule violation"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*Select
COMPUTE int1 = -1
DISPLAY "SELECT COUNT(*) INTO :int1 FROM FLATER.USIG;"
* EXEC SQL SELECT COUNT(*) INTO :int1 FROM FLATER.USIG
* ;
CALL "SUB3" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY "int1 should NOT be 2; its value is ", int1
if (int1 = 2) then
MOVE 0 TO flag
END-IF
*Insert
DISPLAY "INSERT INTO FLATER.USIG VALUES (2, 4);"
* EXEC SQL INSERT INTO FLATER.USIG VALUES (2, 4);
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
*Update
DISPLAY "UPDATE FLATER.USIG SET C1 = 0;"
* EXEC SQL UPDATE FLATER.USIG SET C1 = 0;
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
*Delete
DISPLAY "DELETE FROM FLATER.USIG;"
* EXEC SQL DELETE FROM FLATER.USIG;
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if (flag = 1) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0527','pass','MCO');
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml142.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0527','fail','MCO');
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
* EXEC SQL COMMIT WORK;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "================================================"
******************** END TEST0527 ********************
******************** BEGIN TEST0528 *******************
MOVE 1 TO flag
DISPLAY " TEST0528 "
DISPLAY " Tables are multi-sets: cursor operations"
DISPLAY "References:"
DISPLAY " 4.9 PP.1 -- A table is a multiset of rows"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "DELETE FROM TEMP_S;"
* EXEC SQL DELETE FROM TEMP_S;
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "INSERT INTO TEMP_S"
DISPLAY " SELECT EMPNUM, GRADE, CITY FROM STAFF;"
* EXEC SQL INSERT INTO TEMP_S
* SELECT EMPNUM, GRADE, CITY FROM STAFF;
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO TEMP_S"
DISPLAY " SELECT EMPNUM, GRADE, CITY FROM STAFF"
DISPLAY " WHERE GRADE = 12;"
* EXEC SQL INSERT INTO TEMP_S
* SELECT EMPNUM, GRADE, CITY FROM STAFF
* WHERE GRADE = 12;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C14221 CURSOR FOR"
DISPLAY " SELECT GRADE FROM TEMP_S;"
* EXEC SQL DECLARE C14221 CURSOR FOR
* SELECT GRADE FROM TEMP_S END-EXEC
DISPLAY "OPEN C14221;"
* EXEC SQL OPEN C14221;
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 0 TO c10
MOVE 0 TO c12
MOVE 0 TO c13
MOVE 0 TO cxx
.
P101.
COMPUTE int1 = -1
DISPLAY "FETCH C14221 INTO :int1;"
* EXEC SQL FETCH C14221 INTO :int1;
CALL "SUB15" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
if (SQLCODE NOT = 0) then
GO TO P102
END-IF
DISPLAY "int1 is ", int1
if (int1 = 10) then
COMPUTE c10 = c10 + 1
END-IF
if (int1 = 12) then
COMPUTE c12 = c12 + 1
END-IF
if (int1 = 13) then
COMPUTE c13 = c13 + 1
END-IF
if (int1 NOT = 10 AND int1 NOT = 12 AND int1 NOT =
13) then
COMPUTE cxx = cxx + 1
END-IF
GO TO P101
.
P102.
DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 100 OR NORMSQ NOT = "02000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY "Count of 10s should be 1; its value is ", c10
DISPLAY "Count of 12s should be 4; its value is ", c12
DISPLAY "Count of 13s should be 2; its value is ", c13
DISPLAY "Count of others should be 0; its value is ", cxx
if (c10 NOT = 1 OR c12 NOT = 4) then
MOVE 0 TO flag
END-IF
if (c13 NOT = 2 OR cxx NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C14221;"
* EXEC SQL CLOSE C14221;
CALL "SUB16" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C14222 CURSOR FOR"
DISPLAY " SELECT GRADE FROM TEMP_S ORDER BY GRADE;"
* EXEC SQL DECLARE C14222 CURSOR FOR
* SELECT GRADE FROM TEMP_S ORDER BY GRADE END-EXEC
DISPLAY "OPEN C14222;"
* EXEC SQL OPEN C14222;
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB18" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 10; its value is ", int1
if (int1 NOT = 10) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB19" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 12; its value is ", int1
if (int1 NOT = 12) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB20" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 12; its value is ", int1
if (int1 NOT = 12) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB21" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 12; its value is ", int1
if (int1 NOT = 12) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB22" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 12; its value is ", int1
if (int1 NOT = 12) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB23" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 13; its value is ", int1
if (int1 NOT = 13) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB24" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 13; its value is ", int1
if (int1 NOT = 13) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C14222;"
* EXEC SQL CLOSE C14222;
CALL "SUB25" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "OPEN C14221;"
* EXEC SQL OPEN C14221;
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 4 TO cxx
.
P103.
COMPUTE int1 = -1
DISPLAY "FETCH C14221 INTO :int1;"
* EXEC SQL FETCH C14221 INTO :int1;
CALL "SUB27" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
if (SQLCODE NOT = 0) then
PERFORM CHCKOK
DISPLAY "Skipping remainder of subtest."
GO TO P104
END-IF
DISPLAY "int1 is ", int1
if (int1 = 12) then
GO TO P105
END-IF
COMPUTE cxx = cxx - 1
if (cxx > 0) then
GO TO P103
END-IF
DISPLAY "Error -- should have run into a grade 12 by now."
DISPLAY "Skipping remainder of subtest."
GO TO P104
.
P105.
DISPLAY "DELETE FROM TEMP_S WHERE CURRENT OF C14221;"
* EXEC SQL DELETE FROM TEMP_S WHERE CURRENT OF C14221
* ;
CALL "SUB28" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
.
P104.
DISPLAY "CLOSE C14221;"
* EXEC SQL CLOSE C14221;
CALL "SUB29" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "OPEN C14221;"
* EXEC SQL OPEN C14221;
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 0 TO c10
MOVE 0 TO c12
MOVE 0 TO c13
MOVE 0 TO cxx
.
P106.
COMPUTE int1 = -1
DISPLAY "FETCH C14221 INTO :int1;"
* EXEC SQL FETCH C14221 INTO :int1;
CALL "SUB31" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
if (SQLCODE NOT = 0) then
GO TO P107
END-IF
DISPLAY "int1 is ", int1
if (int1 = 10) then
COMPUTE c10 = c10 + 1
END-IF
if (int1 = 12) then
COMPUTE c12 = c12 + 1
END-IF
if (int1 = 13) then
COMPUTE c13 = c13 + 1
END-IF
if (int1 NOT = 10 AND int1 NOT = 12 AND int1 NOT =
13) then
COMPUTE cxx = cxx + 1
END-IF
GO TO P106
.
P107.
DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 100 OR NORMSQ NOT = "02000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY "Count of 10s should be 1; its value is ", c10
DISPLAY "Count of 12s should be 3; its value is ", c12
DISPLAY "Count of 13s should be 2; its value is ", c13
DISPLAY "Count of others should be 0; its value is ", cxx
if (c10 NOT = 1 OR c12 NOT = 3) then
MOVE 0 TO flag
END-IF
if (c13 NOT = 2 OR cxx NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C14221;"
* EXEC SQL CLOSE C14221;
CALL "SUB32" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "OPEN C14222;"
* EXEC SQL OPEN C14222;
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB34" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 10; its value is ", int1
if (int1 NOT = 10) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB35" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 12; its value is ", int1
if (int1 NOT = 12) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB36" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 12; its value is ", int1
if (int1 NOT = 12) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB37" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 12; its value is ", int1
if (int1 NOT = 12) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB38" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 13; its value is ", int1
if (int1 NOT = 13) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB39" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 13; its value is ", int1
if (int1 NOT = 13) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C14222;"
* EXEC SQL CLOSE C14222;
CALL "SUB40" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "OPEN C14221;"
* EXEC SQL OPEN C14221;
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 4 TO cxx
.
P108.
COMPUTE int1 = -1
DISPLAY "FETCH C14221 INTO :int1;"
* EXEC SQL FETCH C14221 INTO :int1;
CALL "SUB42" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
if (SQLCODE NOT = 0) then
PERFORM CHCKOK
DISPLAY "Skipping remainder of subtest."
GO TO P109
END-IF
DISPLAY "int1 is ", int1
if (int1 = 12) then
GO TO P110
END-IF
COMPUTE cxx = cxx - 1
if (cxx > 0) then
GO TO P108
END-IF
DISPLAY "Error -- should have run into a grade 12 by now."
DISPLAY "Skipping remainder of subtest."
GO TO P109
.
P110.
DISPLAY "UPDATE TEMP_S SET GRADE = 13 WHERE CURRENT OF
- " C14221;"
* EXEC SQL UPDATE TEMP_S SET GRADE = 13 WHERE CURRENT OF
* C14221;
CALL "SUB43" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
.
P109.
DISPLAY "CLOSE C14221;"
* EXEC SQL CLOSE C14221;
CALL "SUB44" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "OPEN C14221;"
* EXEC SQL OPEN C14221;
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 0 TO c10
MOVE 0 TO c12
MOVE 0 TO c13
MOVE 0 TO cxx
.
P111.
COMPUTE int1 = -1
DISPLAY "FETCH C14221 INTO :int1;"
* EXEC SQL FETCH C14221 INTO :int1;
CALL "SUB46" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
if (SQLCODE NOT = 0) then
GO TO P112
END-IF
DISPLAY "int1 is ", int1
if (int1 = 10) then
COMPUTE c10 = c10 + 1
END-IF
if (int1 = 12) then
COMPUTE c12 = c12 + 1
END-IF
if (int1 = 13) then
COMPUTE c13 = c13 + 1
END-IF
if (int1 NOT = 10 AND int1 NOT = 12 AND int1 NOT =
13) then
COMPUTE cxx = cxx + 1
END-IF
GO TO P111
.
P112.
DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 100 OR NORMSQ NOT = "02000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY "Count of 10s should be 1; its value is ", c10
DISPLAY "Count of 12s should be 2; its value is ", c12
DISPLAY "Count of 13s should be 3; its value is ", c13
DISPLAY "Count of others should be 0; its value is ", cxx
if (c10 NOT = 1 OR c12 NOT = 2) then
MOVE 0 TO flag
END-IF
if (c13 NOT = 3 OR cxx NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C14221;"
* EXEC SQL CLOSE C14221;
CALL "SUB47" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "OPEN C14222;"
* EXEC SQL OPEN C14222;
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB49" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 10; its value is ", int1
if (int1 NOT = 10) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB50" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 12; its value is ", int1
if (int1 NOT = 12) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB51" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 12; its value is ", int1
if (int1 NOT = 12) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB52" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 13; its value is ", int1
if (int1 NOT = 13) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB53" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 13; its value is ", int1
if (int1 NOT = 13) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "FETCH C14222 INTO :int1;"
* EXEC SQL FETCH C14222 INTO :int1;
CALL "SUB54" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 13; its value is ", int1
if (int1 NOT = 13) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C14222;"
* EXEC SQL CLOSE C14222;
CALL "SUB55" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB56" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if (flag = 1) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0528','pass','MCO');
CALL "SUB57" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml142.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0528','fail','MCO');
CALL "SUB58" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
* EXEC SQL COMMIT WORK;
CALL "SUB59" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "================================================"
******************** END TEST0528 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.47 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
