|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML144.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "DML144.SCO") calling SQL
* procedures in file "DML144.MCO".
****************************************************************
*
* COMMENT SECTION
*
* DATE 1995/1/25 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* DML144.SCO
* WRITTEN BY: David W. Flater
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests several string-related features that were
* hiding under VARCHAR.
*
* REFERENCES
* FIPS PUB 127-2 14.1 Transitional SQL
* ANSI SQL-1992
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 ch1 PIC X(10).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "FLATER " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid " expected. User ", uidx "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, dml144.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0834 *******************
MOVE 1 TO flag
DISPLAY " TEST0834 "
DISPLAY " (static)"
DISPLAY "References:"
DISPLAY " F# 6 -- VARCHAR data type"
DISPLAY " 6.6 LR.2.a -- Leveling rule relaxed by F# 6"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "CREATE TABLE GRUB (C1 VARCHAR (10));"
* EXEC SQL CREATE TABLE GRUB (C1 VARCHAR (10));
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "SELECT CHAR_LENGTH (EMPNAME) INTO :int1"
DISPLAY " FROM HU.STAFF WHERE GRADE = 10;"
* EXEC SQL SELECT CHAR_LENGTH (EMPNAME) INTO :int1
* FROM HU.STAFF WHERE GRADE = 10;
CALL "SUB5" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 20; its value is ", int1
if (int1 NOT = 20) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "SELECT CHARACTER_LENGTH ('HI' || 'THERE')"
DISPLAY " INTO :int1 FROM HU.ECCO;"
* EXEC SQL SELECT CHARACTER_LENGTH ('HI' || 'THERE')
* INTO :int1 FROM HU.ECCO;
CALL "SUB6" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 7; its value is ", int1
if (int1 NOT = 7) then
MOVE 0 TO flag
END-IF
DISPLAY "INSERT INTO GRUB VALUES ('Hi ');"
* EXEC SQL INSERT INTO GRUB VALUES ('Hi ');
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "SELECT CHARACTER_LENGTH (C1)"
DISPLAY " INTO :int1 FROM GRUB;"
* EXEC SQL SELECT CHARACTER_LENGTH (C1)
* INTO :int1 FROM GRUB;
CALL "SUB8" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 4; its value is ", int1
if (int1 NOT = 4) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "SELECT OCTET_LENGTH (C1)"
DISPLAY " INTO :int1 FROM GRUB;"
* EXEC SQL SELECT OCTET_LENGTH (C1)
* INTO :int1 FROM GRUB;
CALL "SUB9" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be > 2; its value is ", int1
if (int1 NOT > 2) then
MOVE 0 TO flag
END-IF
DISPLAY "UPDATE GRUB SET C1 = NULL;"
* EXEC SQL UPDATE GRUB SET C1 = NULL;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 50 TO indic1
DISPLAY "SELECT CHARACTER_LENGTH (C1)"
DISPLAY " INTO :int1:indic1 FROM GRUB;"
* EXEC SQL SELECT CHARACTER_LENGTH (C1)
* INTO :int1:indic1 FROM GRUB;
CALL "SUB11" USING SQLCODE SQLSTATE int1 indic1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "indic1 should be -1; its value is ", indic1
if (indic1 NOT = -1) then
MOVE 0 TO flag
END-IF
MOVE 50 TO indic1
DISPLAY "SELECT OCTET_LENGTH (C1)"
DISPLAY " INTO :int1:indic1 FROM GRUB;"
* EXEC SQL SELECT OCTET_LENGTH (C1)
* INTO :int1:indic1 FROM GRUB;
CALL "SUB12" USING SQLCODE SQLSTATE int1 indic1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "indic1 should be -1; its value is ", indic1
if (indic1 NOT = -1) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE GRUB CASCADE;"
* EXEC SQL DROP TABLE GRUB CASCADE;
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB15" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0834','pass','MCO');
CALL "SUB16" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml144.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0834','fail','MCO');
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0834 ********************
******************** BEGIN TEST0835 *******************
MOVE 1 TO flag
DISPLAY " TEST0835 "
DISPLAY " (static)"
DISPLAY "References:"
DISPLAY " F# 6 -- VARCHAR data type"
DISPLAY " 6.7 LR.2.a -- Leveling rule relaxed by F# 6"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "CREATE TABLE MOREGRUB (C1 VARCHAR (10), ID INT);"
* EXEC SQL CREATE TABLE MOREGRUB (C1 VARCHAR (10), ID INT)
* ;
CALL "SUB19" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB20" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "CREATE VIEW X4 (S1, S2, ID) AS"
DISPLAY " SELECT SUBSTRING (C1 FROM 6),"
DISPLAY " SUBSTRING (C1 FROM 2 FOR 4), ID"
DISPLAY " FROM MOREGRUB;"
* EXEC SQL CREATE VIEW X4 (S1, S2, ID) AS
* SELECT SUBSTRING (C1 FROM 6),
* SUBSTRING (C1 FROM 2 FOR 4), ID
* FROM MOREGRUB;
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB22" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE "qqqqqqqqqq" TO ch1
DISPLAY "SELECT SUBSTRING (CITY FROM 4 FOR 10)"
DISPLAY " INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';"
* EXEC SQL SELECT SUBSTRING (CITY FROM 4 FOR 10)
* INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';
CALL "SUB23" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch1 should be 'on '; its value is '" ch1 "'"
if (ch1 NOT = "on ") then
MOVE 0 TO flag
END-IF
MOVE "qqqqqqqqqq" TO ch1
DISPLAY "SELECT SUBSTRING (CITY FROM 4)"
DISPLAY " INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';"
* EXEC SQL SELECT SUBSTRING (CITY FROM 4)
* INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';
CALL "SUB24" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be >= 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 01004; its value is ", SQLSTATE
if (SQLCODE < 0 OR SQLSTATE NOT = "01004") then
MOVE 0 TO flag
END-IF
DISPLAY "ch1 should be 'on '; its value is '" ch1 "'"
if (ch1 NOT = "on ") then
MOVE 0 TO flag
END-IF
*6.7 GR.1.d
DISPLAY "SELECT SUBSTRING (CITY FROM 4 FOR -1)"
DISPLAY " INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';"
* EXEC SQL SELECT SUBSTRING (CITY FROM 4 FOR -1)
* INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';
CALL "SUB25" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 22011; its value is ", SQLSTATE
if (SQLCODE NOT < 0 OR SQLSTATE NOT = "22011") then
MOVE 0 TO flag
END-IF
*6.7 GR.1.e.ii.1 (let S1 be the larger of S and 1)
MOVE "qqqqqqqqqq" TO ch1
DISPLAY "SELECT SUBSTRING (CITY FROM 0 FOR 10)"
DISPLAY " INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';"
* EXEC SQL SELECT SUBSTRING (CITY FROM 0 FOR 10)
* INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';
CALL "SUB26" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch1 should be 'Akron '; its value is '" ch1 "'"
if (ch1 NOT = "Akron ") then
MOVE 0 TO flag
END-IF
*6.7 GR.1.e.ii
MOVE 4 TO int1
DISPLAY "int1 is ", int1
MOVE "qqqqqqqqqq" TO ch1
DISPLAY "SELECT SUBSTRING (CITY FROM :int1 FOR 100)"
DISPLAY " INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';"
* EXEC SQL SELECT SUBSTRING (CITY FROM :int1 FOR 100)
* INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';
CALL "SUB27" USING SQLCODE SQLSTATE int1 ch1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be >= 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 01004; its value is ", SQLSTATE
if (SQLCODE < 0 OR SQLSTATE NOT = "01004") then
MOVE 0 TO flag
END-IF
DISPLAY "ch1 should be 'on '; its value is '" ch1 "'"
if (ch1 NOT = "on ") then
MOVE 0 TO flag
END-IF
MOVE "qqqqqqqqqq" TO ch1
DISPLAY "SELECT SUBSTRING (CITY FROM 1 FOR 1)"
DISPLAY " INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';"
* EXEC SQL SELECT SUBSTRING (CITY FROM 1 FOR 1)
* INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';
CALL "SUB28" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch1 should be 'A '; its value is '" ch1 "'"
if (ch1 NOT = "A ") then
MOVE 0 TO flag
END-IF
*6.7 GR.1.e.i
MOVE "qqqqqqqqqq" TO ch1
DISPLAY "SELECT SUBSTRING (CITY FROM 1 FOR 0)"
DISPLAY " INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';"
* EXEC SQL SELECT SUBSTRING (CITY FROM 1 FOR 0)
* INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';
CALL "SUB29" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch1 should be ' '; its value is '" ch1 "'"
if (ch1 NOT = " ") then
MOVE 0 TO flag
END-IF
*6.7 GR.1.e.i
MOVE "qqqqqqqqqq" TO ch1
DISPLAY "SELECT SUBSTRING (CITY FROM 12 FOR 1)"
DISPLAY " INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';"
* EXEC SQL SELECT SUBSTRING (CITY FROM 12 FOR 1)
* INTO :ch1 FROM HU.STAFF WHERE EMPNAME = 'Ed';
CALL "SUB30" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch1 should be ' '; its value is '" ch1 "'"
if (ch1 NOT = " ") then
MOVE 0 TO flag
END-IF
DISPLAY "INSERT INTO MOREGRUB VALUES ('Pretzels', 1);"
* EXEC SQL INSERT INTO MOREGRUB VALUES ('Pretzels', 1)
* ;
CALL "SUB31" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO MOREGRUB VALUES (NULL, 2);"
* EXEC SQL INSERT INTO MOREGRUB VALUES (NULL, 2);
CALL "SUB32" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO MOREGRUB VALUES ('Chips', 3);"
* EXEC SQL INSERT INTO MOREGRUB VALUES ('Chips', 3);
CALL "SUB33" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE "qqqqqqqqqq" TO ch1
DISPLAY "SELECT S1 INTO :ch1"
DISPLAY " FROM X4 WHERE ID = 1;"
* EXEC SQL SELECT S1 INTO :ch1
* FROM X4 WHERE ID = 1;
CALL "SUB34" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch1 should be 'els '; its value is '" ch1 "'"
if (ch1 NOT = "els ") then
MOVE 0 TO flag
END-IF
MOVE "qqqqqqqqqq" TO ch1
DISPLAY "SELECT S1 INTO :ch1"
DISPLAY " FROM X4 WHERE ID = 3;"
* EXEC SQL SELECT S1 INTO :ch1
* FROM X4 WHERE ID = 3;
CALL "SUB35" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch1 should be ' '; its value is '" ch1 "'"
if (ch1 NOT = " ") then
MOVE 0 TO flag
END-IF
MOVE "qqqqqqqqqq" TO ch1
DISPLAY "SELECT S2 INTO :ch1"
DISPLAY " FROM X4 WHERE ID = 1;"
* EXEC SQL SELECT S2 INTO :ch1
* FROM X4 WHERE ID = 1;
CALL "SUB36" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch1 should be 'retz '; its value is '" ch1 "'"
if (ch1 NOT = "retz ") then
MOVE 0 TO flag
END-IF
MOVE "qqqqqqqqqq" TO ch1
DISPLAY "SELECT S2 INTO :ch1"
DISPLAY " FROM X4 WHERE ID = 3;"
* EXEC SQL SELECT S2 INTO :ch1
* FROM X4 WHERE ID = 3;
CALL "SUB37" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch1 should be 'hips '; its value is '" ch1 "'"
if (ch1 NOT = "hips ") then
MOVE 0 TO flag
END-IF
*Column references
MOVE "qqqqqqqqqq" TO ch1
DISPLAY "SELECT SUBSTRING (C1 FROM ID)"
DISPLAY " INTO :ch1 FROM MOREGRUB"
DISPLAY " WHERE C1 LIKE 'Ch%';"
* EXEC SQL SELECT SUBSTRING (C1 FROM ID)
* INTO :ch1 FROM MOREGRUB
* WHERE C1 LIKE 'Ch%';
CALL "SUB38" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch1 should be 'ips '; its value is '" ch1 "'"
if (ch1 NOT = "ips ") then
MOVE 0 TO flag
END-IF
MOVE "qqqqqqqqqq" TO ch1
DISPLAY "SELECT SUBSTRING (C1 FROM 1 FOR ID)"
DISPLAY " INTO :ch1 FROM MOREGRUB"
DISPLAY " WHERE C1 LIKE 'Ch%';"
* EXEC SQL SELECT SUBSTRING (C1 FROM 1 FOR ID)
* INTO :ch1 FROM MOREGRUB
* WHERE C1 LIKE 'Ch%';
CALL "SUB39" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch1 should be 'Chi '; its value is '" ch1 "'"
if (ch1 NOT = "Chi ") then
MOVE 0 TO flag
END-IF
MOVE "salsa " TO ch1
MOVE 8 TO int1
DISPLAY "int1 is ", int1 " and ch1 is ", ch1
DISPLAY "SELECT SUBSTRING (C1 || ' with ' || :ch1"
DISPLAY " FROM 4 FOR :int1 + 1)"
DISPLAY " INTO :ch1 FROM MOREGRUB"
DISPLAY " WHERE C1 LIKE 'Ch%';"
* EXEC SQL SELECT SUBSTRING (C1 || ' with ' || :ch1
* FROM 4 FOR :int1 + 1)
* INTO :ch1 FROM MOREGRUB
* WHERE C1 LIKE 'Ch%';
CALL "SUB40" USING SQLCODE SQLSTATE ch1 int1 ch1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "ch1 should be 'ps with s '; its value is '" ch1 "'"
if (ch1 NOT = "ps with s ") then
MOVE 0 TO flag
END-IF
*6.7 GR.1.c (brutal null column references)
MOVE 19 TO indic1
DISPLAY "SELECT S1 INTO :ch1:indic1"
DISPLAY " FROM X4 WHERE ID = 2;"
* EXEC SQL SELECT S1 INTO :ch1:indic1
* FROM X4 WHERE ID = 2;
CALL "SUB41" USING SQLCODE SQLSTATE ch1 indic1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "indic1 should be -1; its value is ", indic1
if (indic1 NOT = -1) then
MOVE 0 TO flag
END-IF
DISPLAY "DELETE FROM MOREGRUB;"
* EXEC SQL DELETE FROM MOREGRUB;
CALL "SUB42" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO MOREGRUB VALUES ('Tacos', NULL);"
* EXEC SQL INSERT INTO MOREGRUB VALUES ('Tacos', NULL)
* ;
CALL "SUB43" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Future work: test the following cases in a view too
MOVE 19 TO indic1
DISPLAY "SELECT SUBSTRING (C1 FROM 1 FOR ID)"
DISPLAY " INTO :ch1:indic1 FROM MOREGRUB;"
* EXEC SQL SELECT SUBSTRING (C1 FROM 1 FOR ID)
* INTO :ch1:indic1 FROM MOREGRUB;
CALL "SUB44" USING SQLCODE SQLSTATE ch1 indic1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "indic1 should be -1; its value is ", indic1
if (indic1 NOT = -1) then
MOVE 0 TO flag
END-IF
MOVE 19 TO indic1
DISPLAY "SELECT SUBSTRING (C1 FROM ID FOR 1)"
DISPLAY " INTO :ch1:indic1 FROM MOREGRUB;"
* EXEC SQL SELECT SUBSTRING (C1 FROM ID FOR 1)
* INTO :ch1:indic1 FROM MOREGRUB;
CALL "SUB45" USING SQLCODE SQLSTATE ch1 indic1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "indic1 should be -1; its value is ", indic1
if (indic1 NOT = -1) then
MOVE 0 TO flag
END-IF
DISPLAY "UPDATE MOREGRUB SET C1 = NULL;"
* EXEC SQL UPDATE MOREGRUB SET C1 = NULL;
CALL "SUB46" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 19 TO indic1
DISPLAY "SELECT SUBSTRING (C1 FROM ID FOR ID)"
DISPLAY " INTO :ch1:indic1 FROM MOREGRUB;"
* EXEC SQL SELECT SUBSTRING (C1 FROM ID FOR ID)
* INTO :ch1:indic1 FROM MOREGRUB;
CALL "SUB47" USING SQLCODE SQLSTATE ch1 indic1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "indic1 should be -1; its value is ", indic1
if (indic1 NOT = -1) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB48" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE MOREGRUB CASCADE;"
* EXEC SQL DROP TABLE MOREGRUB CASCADE;
CALL "SUB49" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB50" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0835','pass','MCO');
CALL "SUB51" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml144.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0835','fail','MCO');
CALL "SUB52" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB53" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0835 ********************
******************** BEGIN TEST0839 *******************
MOVE 1 TO flag
DISPLAY " TEST0839 "
DISPLAY " Composed and SUBSTRING"
DISPLAY "References:"
DISPLAY " F# 6 -- VARCHAR data type"
DISPLAY " 6.6 LR.2.a -- Leveling rule relaxed by F# 6"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
COMPUTE int1 = -1
DISPLAY "SELECT CHAR_LENGTH (SUBSTRING"
DISPLAY " (CITY FROM 4 FOR 4)) INTO :int1"
DISPLAY " FROM HU.STAFF WHERE EMPNAME = 'Ed';"
* EXEC SQL SELECT CHAR_LENGTH (SUBSTRING
* (CITY FROM 4 FOR 4)) INTO :int1
* FROM HU.STAFF WHERE EMPNAME = 'Ed';
CALL "SUB54" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 4; its value is ", int1
if (int1 NOT = 4) then
MOVE 0 TO flag
END-IF
COMPUTE int1 = -1
DISPLAY "SELECT CHARACTER_LENGTH (SUBSTRING"
DISPLAY " (EMPNUM FROM 1)) INTO :int1"
DISPLAY " FROM HU.STAFF WHERE EMPNAME = 'Ed';"
* EXEC SQL SELECT CHARACTER_LENGTH (SUBSTRING
* (EMPNUM FROM 1)) INTO :int1
* FROM HU.STAFF WHERE EMPNAME = 'Ed';
CALL "SUB55" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 3; its value is ", int1
if (int1 NOT = 3) then
MOVE 0 TO flag
END-IF
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB56" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0839','pass','MCO');
CALL "SUB57" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml144.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0839','fail','MCO');
CALL "SUB58" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB59" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0839 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.83 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
