|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML183.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "DML183.SCO") calling SQL
* procedures in file "DML183.MCO".
****************************************************************
*
* COMMENT SECTION
*
* DATE 1996-05-22 Module COBOL LANGUAGE
* SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* DML183.SCO
* WRITTEN BY: David Flater
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests Intermediate SQL.
*
* REFERENCES
* FIPS PUB 127-2 14.2 Intermediate SQL
* ANSI SQL-1992
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 enuum PIC X(3).
01 casgrd PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "FLATER " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, dml183.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0896 *******************
MOVE 1 TO flag
DISPLAY " FIPS sizing TEST0896"
DISPLAY "FIPS sizing, 50 WHEN clauses in a CASE expression"
DISPLAY "References:"
DISPLAY "FIPS 16.6 -- Sizing #38, WHEN clauses in a CASE
- " expression"
DISPLAY "F#26 -- CASE expression"
DISPLAY "6.9 -- "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
MOVE 0 TO casgrd
MOVE "xxx" TO enuum
DISPLAY "SELECT EMPNUM,"
DISPLAY " CASE GRADE"
DISPLAY " WHEN 0 THEN 1000"
DISPLAY " WHEN 1 THEN 997"
DISPLAY " WHEN 2 THEN 994"
DISPLAY " WHEN 3 THEN 991"
DISPLAY " WHEN 4 THEN 988"
DISPLAY " WHEN 5 THEN 985"
DISPLAY " WHEN 6 THEN 982"
DISPLAY " WHEN 7 THEN 979"
DISPLAY " WHEN 8 THEN 976"
DISPLAY " WHEN 9 THEN 973"
DISPLAY " WHEN 10 THEN 970"
DISPLAY " WHEN 11 THEN 967"
DISPLAY " WHEN 12 THEN 964"
DISPLAY " WHEN 13 THEN 961"
DISPLAY " WHEN 14 THEN 958"
DISPLAY " WHEN 15 THEN 955"
DISPLAY " WHEN 16 THEN 952"
DISPLAY " WHEN 17 THEN 949"
DISPLAY " WHEN 18 THEN 946"
DISPLAY " WHEN 19 THEN 943"
DISPLAY " WHEN 20 THEN 940"
DISPLAY " WHEN 21 THEN 937"
DISPLAY " WHEN 22 THEN 934"
DISPLAY " WHEN 23 THEN 931"
DISPLAY " WHEN 24 THEN 928"
DISPLAY " WHEN 25 THEN 925"
DISPLAY " WHEN 26 THEN 922"
DISPLAY " WHEN 27 THEN 919"
DISPLAY " WHEN 28 THEN 916"
DISPLAY " WHEN 29 THEN 913"
DISPLAY " WHEN 30 THEN 910"
DISPLAY " WHEN 31 THEN 907"
DISPLAY " WHEN 32 THEN 904"
DISPLAY " WHEN 33 THEN 901"
DISPLAY " WHEN 34 THEN 898"
DISPLAY " WHEN 35 THEN 895"
DISPLAY " WHEN 36 THEN 892"
DISPLAY " WHEN 37 THEN 889"
DISPLAY " WHEN 38 THEN 886"
DISPLAY " WHEN 39 THEN 883"
DISPLAY " WHEN 40 THEN 880"
DISPLAY " WHEN 41 THEN 877"
DISPLAY " WHEN 42 THEN 874"
DISPLAY " WHEN 43 THEN 871"
DISPLAY " WHEN 44 THEN 868"
DISPLAY " WHEN 45 THEN 865"
DISPLAY " WHEN 46 THEN 862"
DISPLAY " WHEN 47 THEN 859"
DISPLAY " WHEN 48 THEN 856"
DISPLAY " WHEN 49 THEN 853"
DISPLAY " END"
DISPLAY " INTO :enuum, :casgrd"
DISPLAY " FROM HU.STAFF"
DISPLAY " WHERE EMPNAME = 'Betty';"
* EXEC SQL SELECT EMPNUM,
* CASE GRADE
* WHEN 0 THEN 1000
* WHEN 1 THEN 997
* WHEN 2 THEN 994
* WHEN 3 THEN 991
* WHEN 4 THEN 988
* WHEN 5 THEN 985
* WHEN 6 THEN 982
* WHEN 7 THEN 979
* WHEN 8 THEN 976
* WHEN 9 THEN 973
* WHEN 10 THEN 970
* WHEN 11 THEN 967
* WHEN 12 THEN 964
* WHEN 13 THEN 961
* WHEN 14 THEN 958
* WHEN 15 THEN 955
* WHEN 16 THEN 952
* WHEN 17 THEN 949
* WHEN 18 THEN 946
* WHEN 19 THEN 943
* WHEN 20 THEN 940
* WHEN 21 THEN 937
* WHEN 22 THEN 934
* WHEN 23 THEN 931
* WHEN 24 THEN 928
* WHEN 25 THEN 925
* WHEN 26 THEN 922
* WHEN 27 THEN 919
* WHEN 28 THEN 916
* WHEN 29 THEN 913
* WHEN 30 THEN 910
* WHEN 31 THEN 907
* WHEN 32 THEN 904
* WHEN 33 THEN 901
* WHEN 34 THEN 898
* WHEN 35 THEN 895
* WHEN 36 THEN 892
* WHEN 37 THEN 889
* WHEN 38 THEN 886
* WHEN 39 THEN 883
* WHEN 40 THEN 880
* WHEN 41 THEN 877
* WHEN 42 THEN 874
* WHEN 43 THEN 871
* WHEN 44 THEN 868
* WHEN 45 THEN 865
* WHEN 46 THEN 862
* WHEN 47 THEN 859
CALL "SUB3" USING SQLCODE SQLSTATE enuum casgrd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "enuum should be 'E2 '; its value is '", enuum, "'"
if (enuum NOT = "E2 ") then
MOVE 0 TO flag
END-IF
DISPLAY "casgrd should be 970; its value is ", casgrd
if (casgrd NOT = 970) then
MOVE 0 TO flag
END-IF
MOVE 0 TO casgrd
MOVE "xxx" TO enuum
DISPLAY "SELECT EMPNUM,"
DISPLAY " CASE"
DISPLAY " WHEN GRADE = 0 THEN 1000"
DISPLAY " WHEN GRADE = 1 THEN 997"
DISPLAY " WHEN GRADE = 2 THEN 994"
DISPLAY " WHEN GRADE = 3 THEN 991"
DISPLAY " WHEN GRADE = 4 THEN 988"
DISPLAY " WHEN GRADE = 5 THEN 985"
DISPLAY " WHEN GRADE = 6 THEN 982"
DISPLAY " WHEN GRADE = 7 THEN 979"
DISPLAY " WHEN GRADE = 8 THEN 976"
DISPLAY " WHEN GRADE = 9 THEN 973"
DISPLAY " WHEN GRADE = 11 THEN 967"
DISPLAY " WHEN GRADE = 12 THEN 964"
DISPLAY " WHEN GRADE = 13 THEN 961"
DISPLAY " WHEN GRADE = 14 THEN 958"
DISPLAY " WHEN GRADE = 15 THEN 955"
DISPLAY " WHEN GRADE = 16 THEN 952"
DISPLAY " WHEN GRADE = 17 THEN 949"
DISPLAY " WHEN GRADE = 18 THEN 946"
DISPLAY " WHEN GRADE = 19 THEN 943"
DISPLAY " WHEN GRADE = 20 THEN 940"
DISPLAY " WHEN GRADE = 21 THEN 937"
DISPLAY " WHEN GRADE = 22 THEN 934"
DISPLAY " WHEN GRADE = 23 THEN 931"
DISPLAY " WHEN GRADE = 24 THEN 928"
DISPLAY " WHEN GRADE = 25 THEN 925"
DISPLAY " WHEN GRADE = 26 THEN 922"
DISPLAY " WHEN GRADE = 27 THEN 919"
DISPLAY " WHEN GRADE = 28 THEN 916"
DISPLAY " WHEN GRADE = 29 THEN 913"
DISPLAY " WHEN GRADE = 30 THEN 910"
DISPLAY " WHEN GRADE = 31 THEN 907"
DISPLAY " WHEN GRADE = 32 THEN 904"
DISPLAY " WHEN GRADE = 33 THEN 901"
DISPLAY " WHEN GRADE = 34 THEN 898"
DISPLAY " WHEN GRADE = 35 THEN 895"
DISPLAY " WHEN GRADE = 36 THEN 892"
DISPLAY " WHEN GRADE = 37 THEN 889"
DISPLAY " WHEN GRADE = 38 THEN 886"
DISPLAY " WHEN GRADE = 39 THEN 883"
DISPLAY " WHEN GRADE = 40 THEN 880"
DISPLAY " WHEN GRADE = 41 THEN 877"
DISPLAY " WHEN GRADE = 42 THEN 874"
DISPLAY " WHEN GRADE = 43 THEN 871"
DISPLAY " WHEN GRADE = 44 THEN 868"
DISPLAY " WHEN GRADE = 45 THEN 865"
DISPLAY " WHEN GRADE = 46 THEN 862"
DISPLAY " WHEN GRADE = 47 THEN 859"
DISPLAY " WHEN GRADE = 48 THEN 856"
DISPLAY " WHEN GRADE = 49 THEN 853"
DISPLAY " WHEN GRADE = 10 THEN 970"
DISPLAY " END"
DISPLAY " INTO :enuum, :casgrd"
DISPLAY " FROM HU.STAFF"
DISPLAY " WHERE EMPNAME = 'Betty';"
* EXEC SQL SELECT EMPNUM,
* CASE
* WHEN GRADE = 0 THEN 1000
* WHEN GRADE = 1 THEN 997
* WHEN GRADE = 2 THEN 994
* WHEN GRADE = 3 THEN 991
* WHEN GRADE = 4 THEN 988
* WHEN GRADE = 5 THEN 985
* WHEN GRADE = 6 THEN 982
* WHEN GRADE = 7 THEN 979
* WHEN GRADE = 8 THEN 976
* WHEN GRADE = 9 THEN 973
* WHEN GRADE = 11 THEN 967
* WHEN GRADE = 12 THEN 964
* WHEN GRADE = 13 THEN 961
* WHEN GRADE = 14 THEN 958
* WHEN GRADE = 15 THEN 955
* WHEN GRADE = 16 THEN 952
* WHEN GRADE = 17 THEN 949
* WHEN GRADE = 18 THEN 946
* WHEN GRADE = 19 THEN 943
* WHEN GRADE = 20 THEN 940
* WHEN GRADE = 21 THEN 937
* WHEN GRADE = 22 THEN 934
* WHEN GRADE = 23 THEN 931
* WHEN GRADE = 24 THEN 928
* WHEN GRADE = 25 THEN 925
* WHEN GRADE = 26 THEN 922
* WHEN GRADE = 27 THEN 919
* WHEN GRADE = 28 THEN 916
* WHEN GRADE = 29 THEN 913
* WHEN GRADE = 30 THEN 910
* WHEN GRADE = 31 THEN 907
* WHEN GRADE = 32 THEN 904
* WHEN GRADE = 33 THEN 901
* WHEN GRADE = 34 THEN 898
* WHEN GRADE = 35 THEN 895
* WHEN GRADE = 36 THEN 892
* WHEN GRADE = 37 THEN 889
* WHEN GRADE = 38 THEN 886
* WHEN GRADE = 39 THEN 883
* WHEN GRADE = 40 THEN 880
* WHEN GRADE = 41 THEN 877
* WHEN GRADE = 42 THEN 874
* WHEN GRADE = 43 THEN 871
* WHEN GRADE = 44 THEN 868
* WHEN GRADE = 45 THEN 865
* WHEN GRADE = 46 THEN 862
* WHEN GRADE = 47 THEN 859
* WHEN GRADE = 48 THEN 856
CALL "SUB4" USING SQLCODE SQLSTATE enuum casgrd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "enuum should be 'E2 '; its value is '", enuum, "'"
if (enuum NOT = "E2 ") then
MOVE 0 TO flag
END-IF
DISPLAY "casgrd should be 970; its value is ", casgrd
if (casgrd NOT = 970) then
MOVE 0 TO flag
END-IF
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0896','pass','MCO');
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml183.mco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0896','fail','MCO');
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0896 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.16 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
