|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML186.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "DML186.SCO") calling SQL
* procedures in file "DML186.MCO".
****************************************************************
*
* COMMENT SECTION
*
* DATE 1996-05-24 Module COBOL LANGUAGE
* SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* DML186.SCO
* WRITTEN BY: David Flater
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests Intermediate SQL.
*
* REFERENCES
* FIPS PUB 127-2 14.2 Intermediate SQL
* ANSI SQL-1992
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 int2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 int3 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 int4 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 int5 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 int6 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 int7 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "FLATER " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, dml186.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0899 *******************
MOVE 1 TO flag
DISPLAY " FIPS sizing TEST0899"
DISPLAY "FIPS sizing, INTERVAL decimal leading field
- " precision"
DISPLAY "References:"
DISPLAY "FIPS 16.6 -- Sizing #23, INTERVAL decimal leading
- " field precision"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*Intermediate value = 7
DISPLAY "CREATE TABLE TIMEPREC ("
DISPLAY " C1 INTERVAL YEAR (7) TO MONTH,"
DISPLAY " C2 INTERVAL MONTH (7),"
DISPLAY " C3 INTERVAL DAY (7) TO HOUR,"
DISPLAY " C4 INTERVAL HOUR (7) TO MINUTE,"
DISPLAY " C5 INTERVAL MINUTE (7) TO SECOND,"
DISPLAY " C6 INTERVAL SECOND (7),"
DISPLAY " C7 INTERVAL SECOND (7, 0));"
* EXEC SQL CREATE TABLE TIMEPREC (
* C1 INTERVAL YEAR (7) TO MONTH,
* C2 INTERVAL MONTH (7),
* C3 INTERVAL DAY (7) TO HOUR,
* C4 INTERVAL HOUR (7) TO MINUTE,
* C5 INTERVAL MINUTE (7) TO SECOND,
* C6 INTERVAL SECOND (7),
* C7 INTERVAL SECOND (7, 0));
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*10.1 SR.6 If interval frac seconds precision not specified,
*then it's 6.
DISPLAY "INSERT INTO TIMEPREC VALUES ("
DISPLAY " INTERVAL '9999999-03' YEAR TO MONTH,"
DISPLAY " INTERVAL '9999999' MONTH,"
DISPLAY " INTERVAL '9999999 3' DAY TO HOUR,"
DISPLAY " INTERVAL '9999999:03' HOUR TO MINUTE,"
DISPLAY " INTERVAL '9999999:03' MINUTE TO SECOND,"
DISPLAY " INTERVAL '9999999.444444' SECOND,"
DISPLAY " INTERVAL '9999999' SECOND);"
* EXEC SQL INSERT INTO TIMEPREC VALUES (
* INTERVAL '9999999-03' YEAR TO MONTH,
* INTERVAL '9999999' MONTH,
* INTERVAL '9999999 3' DAY TO HOUR,
* INTERVAL '9999999:03' HOUR TO MINUTE,
* INTERVAL '9999999:03' MINUTE TO SECOND,
* INTERVAL '9999999.444444' SECOND,
* INTERVAL '9999999' SECOND);
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 0 TO int1
MOVE 0 TO int2
MOVE 0 TO int3
MOVE 0 TO int4
MOVE 0 TO int5
MOVE 0 TO int6
MOVE 0 TO int7
DISPLAY "SELECT EXTRACT (YEAR FROM C1),"
DISPLAY " EXTRACT (MONTH FROM C2),"
DISPLAY " EXTRACT (DAY FROM C3),"
DISPLAY " EXTRACT (HOUR FROM C4),"
DISPLAY " EXTRACT (MINUTE FROM C5),"
DISPLAY " EXTRACT (SECOND FROM C6),"
DISPLAY " EXTRACT (SECOND FROM C7)"
DISPLAY " INTO :int1, :int2, :int3, :int4, :int5, :int6,
- " :int7"
DISPLAY " FROM TIMEPREC;"
* EXEC SQL SELECT EXTRACT (YEAR FROM C1),
* EXTRACT (MONTH FROM C2),
* EXTRACT (DAY FROM C3),
* EXTRACT (HOUR FROM C4),
* EXTRACT (MINUTE FROM C5),
* EXTRACT (SECOND FROM C6),
* EXTRACT (SECOND FROM C7)
* INTO :int1, :int2, :int3, :int4, :int5, :int6, :int7
* FROM TIMEPREC;
CALL "SUB6" USING SQLCODE SQLSTATE int1 int2 int3 int4 int5
int6 int7
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 9999999; its value is ", int1
if (int1 NOT = 9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "int2 should be 9999999; its value is ", int2
if (int2 NOT = 9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "int3 should be 9999999; its value is ", int3
if (int3 NOT = 9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "int4 should be 9999999; its value is ", int4
if (int4 NOT = 9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "int5 should be 9999999; its value is ", int5
if (int5 NOT = 9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "int6 should be 9999999; its value is ", int6
if (int6 NOT = 9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "int7 should be 9999999; its value is ", int7
if (int7 NOT = 9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "DELETE FROM TIMEPREC;"
* EXEC SQL DELETE FROM TIMEPREC;
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO TIMEPREC VALUES ("
DISPLAY " INTERVAL -'9999999-03' YEAR TO MONTH,"
DISPLAY " INTERVAL -'9999999' MONTH,"
DISPLAY " INTERVAL -'9999999 3' DAY TO HOUR,"
DISPLAY " INTERVAL -'9999999:03' HOUR TO MINUTE,"
DISPLAY " INTERVAL -'9999999:03' MINUTE TO SECOND,"
DISPLAY " INTERVAL -'9999999.444444' SECOND,"
DISPLAY " INTERVAL -'9999999' SECOND);"
* EXEC SQL INSERT INTO TIMEPREC VALUES (
* INTERVAL -'9999999-03' YEAR TO MONTH,
* INTERVAL -'9999999' MONTH,
* INTERVAL -'9999999 3' DAY TO HOUR,
* INTERVAL -'9999999:03' HOUR TO MINUTE,
* INTERVAL -'9999999:03' MINUTE TO SECOND,
* INTERVAL -'9999999.444444' SECOND,
* INTERVAL -'9999999' SECOND);
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 0 TO int1
MOVE 0 TO int2
MOVE 0 TO int3
MOVE 0 TO int4
MOVE 0 TO int5
MOVE 0 TO int6
MOVE 0 TO int7
DISPLAY "SELECT EXTRACT (YEAR FROM C1),"
DISPLAY " EXTRACT (MONTH FROM C2),"
DISPLAY " EXTRACT (DAY FROM C3),"
DISPLAY " EXTRACT (HOUR FROM C4),"
DISPLAY " EXTRACT (MINUTE FROM C5),"
DISPLAY " EXTRACT (SECOND FROM C6),"
DISPLAY " EXTRACT (SECOND FROM C7)"
DISPLAY " INTO :int1, :int2, :int3, :int4, :int5, :int6,
- " :int7"
DISPLAY " FROM TIMEPREC;"
* EXEC SQL SELECT EXTRACT (YEAR FROM C1),
* EXTRACT (MONTH FROM C2),
* EXTRACT (DAY FROM C3),
* EXTRACT (HOUR FROM C4),
* EXTRACT (MINUTE FROM C5),
* EXTRACT (SECOND FROM C6),
* EXTRACT (SECOND FROM C7)
* INTO :int1, :int2, :int3, :int4, :int5, :int6, :int7
* FROM TIMEPREC;
CALL "SUB9" USING SQLCODE SQLSTATE int1 int2 int3 int4 int5
int6 int7
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be -9999999; its value is ", int1
if (int1 NOT = -9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "int2 should be -9999999; its value is ", int2
if (int2 NOT = -9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "int3 should be -9999999; its value is ", int3
if (int3 NOT = -9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "int4 should be -9999999; its value is ", int4
if (int4 NOT = -9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "int5 should be -9999999; its value is ", int5
if (int5 NOT = -9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "int6 should be -9999999; its value is ", int6
if (int6 NOT = -9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "int7 should be -9999999; its value is ", int7
if (int7 NOT = -9999999) then
MOVE 0 TO flag
END-IF
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE TIMEPREC CASCADE;"
* EXEC SQL DROP TABLE TIMEPREC CASCADE;
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0899','pass','MCO');
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml186.mco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0899','fail','MCO');
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB15" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0899 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.28 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
