|
IDENTIFICATION DIVISION.
PROGRAM-ID. MPA011.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "MPA011.SCO") calling SQL
* procedures in file "MPA011.MCO".
****************************************************************
*
* COMMENT SECTION
*
* DATE 1993/3/4 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* MPA011.SCO
* WRITTEN BY: David W. Flater
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This program tests <grant statement> and <revoke statement>
* in dynamic SQL. This is part A of a two-part
* concurrency test. It must be run as FLATER before MPB011 is
* run as HU.
*
* REFERENCES
* FIPS PUB 127-2 14.1 Transitional SQL
* ANSI SQL-1992
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 progno PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 dstmt PIC X(50).
01 longst PIC X(240).
* EXEC SQL END DECLARE SECTION END-EXEC
01 pauze PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 repcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 iii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 fails PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 maxfls PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 oldtok PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 waitin PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* Debugging is turned on by setting debug1 = 1
01 debug1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "FLATER " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, mpa011.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
DISPLAY "This is part A of a two-part test. It should be
- " started"
DISPLAY "BEFORE mpb011. Table TOKENS must exist in schema
- " HU."
*to debug program, set debug1 = 1
MOVE 0 TO debug1
MOVE 1000 TO maxfls
MOVE 1 TO pauze
*This is not a concurrency test.
*Using TEd, increase variable pauze if there is MAYDAY message.
MOVE 11 TO progno
******************** BEGIN TEST0629 *******************
MOVE 1 TO flag
DISPLAY " TEST0629 "
DISPLAY " (dynamic)"
DISPLAY " This is program 'A'"
DISPLAY "References:"
DISPLAY " 11.36 "
DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features
- " 1, 3"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
MOVE 0 TO fails
DISPLAY "Checking for extraneous tokens...."
.
P100.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P100"
END-IF
* EXEC SQL SELECT COUNT(*) INTO :int1
* FROM HU.TOKENS WHERE PROG_NO = :progno;
CALL "SUB3" USING SQLCODE SQLSTATE int1 progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 000
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P100
END-IF
if (int1 = 0) then
GO TO P101
END-IF
MOVE 0 TO fails
DISPLAY "Extraneous tokens found!"
.
P102.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P102"
END-IF
* EXEC SQL DELETE FROM HU.TOKENS WHERE PROG_NO = :progno
* ;
CALL "SUB5" USING SQLCODE SQLSTATE progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 001
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P102
END-IF
* EXEC SQL COMMIT WORK;
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 002
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P102
END-IF
GO TO P199
*No extraneous tokens
.
P101.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P101"
END-IF
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
DISPLAY "Program 'A' now starting work."
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "dstmt=""DROP TABLE GRANT011 RESTRICT"""
MOVE "DROP TABLE GRANT011 RESTRICT "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB10" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "dstmt=""CREATE TABLE GRANT011 (C1 INT)"""
MOVE "CREATE TABLE GRANT011 (C1 INT) "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB12" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "dstmt=""INSERT INTO GRANT011 VALUES (1)"""
MOVE "INSERT INTO GRANT011 VALUES (1) "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB14" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB15" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
MOVE 0 TO fails
DISPLAY "Setting token = 1"
.
P103.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P103"
END-IF
* EXEC SQL INSERT INTO HU.TOKENS VALUES (:progno, 1);
CALL "SUB16" USING SQLCODE SQLSTATE progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 003
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P103
END-IF
* EXEC SQL COMMIT WORK;
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 004
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB19" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P103
END-IF
DISPLAY "START PROGRAM B if you haven't already!"
MOVE 2 TO waitin
.
P194.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P194"
END-IF
MOVE 0 TO fails
COMPUTE oldtok = -1
DISPLAY "Waiting for the token to reach ", waitin, "."
.
P104.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P104"
END-IF
COMPUTE int1 = -1
* EXEC SQL SELECT TOKEN_NO INTO :int1 FROM HU.TOKENS
* WHERE PROG_NO = :progno;
CALL "SUB20" USING SQLCODE SQLSTATE int1 progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
END-IF
if (int1 NOT = oldtok AND SQLCODE NOT < 0 AND
SQLCODE NOT = 100 ) then
DISPLAY "Token = ", int1
MOVE int1 TO oldtok
MOVE 0 TO fails
END-IF
if (SQLCODE < 0 OR int1 NOT = waitin) then
*Waste time and try again
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ = "21000") then
GO TO P198
END-IF
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 005
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P104
END-IF
*Start new transaction
* EXEC SQL COMMIT WORK;
CALL "SUB22" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
if (int1 = 2) then
GO TO P196
END-IF
if (int1 = 4) then
GO TO P190
END-IF
GO TO P197
*token == 2
.
P196.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P196"
END-IF
DISPLAY "dstmt=""GRANT SELECT ON GRANT011 TO HU"""
MOVE "GRANT SELECT ON GRANT011 TO HU "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB23" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB24" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 4 TO waitin
GO TO P195
*token == 4
.
P190.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P190"
END-IF
DISPLAY "dstmt=""GRANT ALL PRIVILEGES ON GRANT011 TO HU"""
MOVE "GRANT ALL PRIVILEGES ON GRANT011 TO HU "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB25" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB26" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 6 TO waitin
.
P195.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P195"
END-IF
MOVE 0 TO fails
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
DISPLAY "Incrementing token"
.
P193.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P193"
END-IF
* EXEC SQL UPDATE HU.TOKENS SET TOKEN_NO = TOKEN_NO + 1
* WHERE PROG_NO = :progno;
CALL "SUB27" USING SQLCODE SQLSTATE progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 006
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB28" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P193
END-IF
* EXEC SQL COMMIT WORK;
CALL "SUB29" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 007
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB30" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P193
END-IF
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
GO TO P194
*token == 6
.
P197.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P197"
END-IF
DISPLAY "Killing token and finishing up."
* EXEC SQL DELETE FROM HU.TOKENS WHERE PROG_NO = :progno
* ;
CALL "SUB31" USING SQLCODE SQLSTATE progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 008
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB32" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P197
END-IF
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0629','pass','MCO');
CALL "SUB33" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " mpa011.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0629','fail','MCO');
CALL "SUB34" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB35" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0629 ********************
******************** BEGIN TEST0630 *******************
MOVE 1 TO flag
DISPLAY " TEST0630 "
DISPLAY " (dynamic)"
DISPLAY " This is program 'A'"
DISPLAY "References:"
DISPLAY " 11.37 "
DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features
- " 1, 3"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
MOVE 0 TO fails
DISPLAY "Checking for extraneous tokens...."
.
P160.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P160"
END-IF
* EXEC SQL SELECT COUNT(*) INTO :int1
* FROM HU.TOKENS WHERE PROG_NO = :progno;
CALL "SUB36" USING SQLCODE SQLSTATE int1 progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 009
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB37" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P160
END-IF
if (int1 = 0) then
GO TO P161
END-IF
MOVE 0 TO fails
DISPLAY "Extraneous tokens found!"
.
P162.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P162"
END-IF
* EXEC SQL DELETE FROM HU.TOKENS WHERE PROG_NO = :progno
* ;
CALL "SUB38" USING SQLCODE SQLSTATE progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 010
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB39" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P162
END-IF
* EXEC SQL COMMIT WORK;
CALL "SUB40" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 011
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB41" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P162
END-IF
GO TO P199
*No extraneous tokens
.
P161.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P161"
END-IF
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
DISPLAY "Program 'A' now starting work."
* EXEC SQL DELETE FROM CONCATBUF;
CALL "SUB42" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO CONCATBUF VALUES (
* 'REVOKE SELECT, UPDATE, DELETE ON GRANT011' ||
* ' FROM HU CASCADE'
* );
CALL "SUB43" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF;
CALL "SUB44" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst, """"
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB45" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "EXECUTE IMMEDIATE :longst;"
* EXEC SQL EXECUTE IMMEDIATE :longst;
CALL "SUB46" USING SQLCODE SQLSTATE longst
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB47" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
MOVE 0 TO fails
DISPLAY "Setting token = 1"
.
P163.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P163"
END-IF
* EXEC SQL INSERT INTO HU.TOKENS VALUES (:progno, 1);
CALL "SUB48" USING SQLCODE SQLSTATE progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 012
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB49" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P163
END-IF
* EXEC SQL COMMIT WORK;
CALL "SUB50" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 013
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB51" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P163
END-IF
DISPLAY "START PROGRAM B if you haven't already!"
MOVE 2 TO waitin
.
P164.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P164"
END-IF
MOVE 0 TO fails
COMPUTE oldtok = -1
DISPLAY "Waiting for the token to reach ", waitin, "."
.
P165.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P165"
END-IF
COMPUTE int1 = -1
* EXEC SQL SELECT TOKEN_NO INTO :int1 FROM HU.TOKENS
* WHERE PROG_NO = :progno;
CALL "SUB52" USING SQLCODE SQLSTATE int1 progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
END-IF
if (int1 NOT = oldtok AND SQLCODE NOT < 0 AND
SQLCODE NOT = 100 ) then
DISPLAY "Token = ", int1
MOVE int1 TO oldtok
MOVE 0 TO fails
END-IF
if (SQLCODE < 0 OR int1 NOT = waitin) then
*Waste time and try again
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ = "21000") then
GO TO P198
END-IF
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 014
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB53" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P165
END-IF
*Start new transaction because of REVOKEs
* EXEC SQL COMMIT WORK;
CALL "SUB54" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
if (int1 = 2) then
GO TO P166
END-IF
GO TO P167
*token == 2
.
P166.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P166"
END-IF
DISPLAY "dstmt=""REVOKE ALL PRIVILEGES ON GRANT011 FROM HU
- " CASCADE"""
MOVE "REVOKE ALL PRIVILEGES ON GRANT011 FROM HU CASCADE "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB55" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB56" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 4 TO waitin
.
P168.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P168"
END-IF
MOVE 0 TO fails
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
DISPLAY "Incrementing token"
.
P169.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P169"
END-IF
* EXEC SQL UPDATE HU.TOKENS SET TOKEN_NO = TOKEN_NO + 1
* WHERE PROG_NO = :progno;
CALL "SUB57" USING SQLCODE SQLSTATE progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 015
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB58" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P169
END-IF
* EXEC SQL COMMIT WORK;
CALL "SUB59" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 016
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB60" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P169
END-IF
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
GO TO P164
*token == 4
.
P167.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P167"
END-IF
DISPLAY "Killing token and finishing up."
* EXEC SQL DELETE FROM HU.TOKENS WHERE PROG_NO = :progno
* ;
CALL "SUB61" USING SQLCODE SQLSTATE progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 017
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB62" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P167
END-IF
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0630','pass','MCO');
CALL "SUB63" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " mpa011.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0630','fail','MCO');
CALL "SUB64" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB65" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0630 ********************
STOP RUN.
P198.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P198"
END-IF
DISPLAY "CARDINALITY VIOLATION"
.
P199.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P199"
END-IF
if (fails > maxfls) then
DISPLAY "The number of attempts (fails) exceeds variable
- " maxfls."
DISPLAY "Increase the value of variable maxfls, if
- " needed."
DISPLAY "Or, increase the value of variable pauze."
END-IF
DISPLAY "MAYDAY MAYDAY PROGRAM ABORTING"
DISPLAY "You will have to start this test over."
DISPLAY "Trying to kill token (no retries)...."
* EXEC SQL DELETE FROM HU.TOKENS WHERE PROG_NO = :progno
* ;
CALL "SUB66" USING SQLCODE SQLSTATE progno
MOVE SQLCODE TO SQL-COD
* EXEC SQL COMMIT WORK;
CALL "SUB67" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
SLEEEP.
COMPUTE repcnt = fails * pauze
if (repcnt > 17) then
COMPUTE repcnt = repcnt * repcnt
END-IF
MOVE 1 TO iii
.
P133.
* EXEC SQL COMMIT WORK;
CALL "SUB68" USING SQLCODE SQLSTATE
COMPUTE int1 = -1
* EXEC SQL UPDATE HU.STAFF
* SET GRADE = -1 WHERE GRADE = :int1;
CALL "SUB69" USING SQLCODE SQLSTATE int1
COMPUTE iii = iii + 1
if (iii < repcnt) then
GO TO P133
END-IF
.
¤ Dauer der Verarbeitung: 0.62 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
