|
IDENTIFICATION DIVISION.
PROGRAM-ID. MPB011.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "MPB011.SCO") calling SQL
* procedures in file "MPB011.MCO".
****************************************************************
*
* COMMENT SECTION
*
* DATE 1994/3/4 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* MPB011.SCO
* WRITTEN BY: David W. Flater
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This program tests <grant statement> and <revoke statement>
* in dynamic SQL. This is part B of a two-part
* concurrency test. It must be run as HU after MPA011 is
* run as FLATER.
*
* REFERENCES
* FIPS PUB 127-2 14.1 Transitional SQL
* ANSI SQL-1992
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 progno PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 dstmt PIC X(50).
* EXEC SQL END DECLARE SECTION END-EXEC
01 pauze PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 pauze2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 repcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 iii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 fails PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 maxfls PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 oldtok PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 waitin PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* Debugging is turned on by setting debug1 = 1
01 debug1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "HU " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, mpb011.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
DISPLAY "This is part B of a two-part test. It should be
- " started"
DISPLAY "AFTER mpa011. Table TOKENS must exist in schema
- " HU."
*to debug program, set debug1 = 1
MOVE 0 TO debug1
MOVE 1000 TO maxfls
MOVE 1 TO pauze
MOVE 2 TO pauze2
*This is not a concurrency test.
*Using TEd, increase variable pauze if there is MAYDAY message.
MOVE 11 TO progno
******************** BEGIN TEST0629 *******************
MOVE 1 TO flag
DISPLAY " TEST0629 "
DISPLAY " (dynamic)"
DISPLAY " This is program 'B'"
DISPLAY "References:"
DISPLAY " 11.36 "
DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features
- " 1, 3"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "You should have already started Program A."
MOVE 1 TO waitin
.
P194.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P194"
END-IF
if (waitin = -1) then
GO TO P197
END-IF
MOVE 0 TO fails
COMPUTE oldtok = -1
DISPLAY "Waiting for the token to reach ", waitin, "."
.
P104.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P104"
END-IF
COMPUTE int1 = -1
* EXEC SQL SELECT TOKEN_NO INTO :int1 FROM HU.TOKENS
* WHERE PROG_NO = :progno;
CALL "SUB3" USING SQLCODE SQLSTATE int1 progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
END-IF
if (int1 NOT = oldtok AND SQLCODE NOT < 0 AND
SQLCODE NOT = 100 ) then
DISPLAY "Token = ", int1
MOVE int1 TO oldtok
MOVE 0 TO fails
END-IF
if (SQLCODE < 0 OR SQLCODE = 100 OR int1 NOT =
waitin) then
*Waste time and try again
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ = "21000") then
GO TO P198
END-IF
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 018
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P104
END-IF
*Start new transaction
* EXEC SQL COMMIT WORK;
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
if (int1 = 1) then
GO TO P196
END-IF
if (int1 = 3) then
GO TO P190
END-IF
if (int1 = 5) then
GO TO P189
END-IF
GO TO P197
*token == 1
.
P196.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P196"
END-IF
DISPLAY "Program 'B' trying to access inaccessible table."
DISPLAY "dstmt=""SELECT COUNT(*) FROM FLATER.GRANT011"""
MOVE "SELECT COUNT(*) FROM FLATER.GRANT011 "
TO dstmt
DISPLAY "PREPARE S01111 FROM :dstmt;"
* EXEC SQL PREPARE S01111 FROM :dstmt;
CALL "SUB6" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
GO TO P100
END-IF
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C01111 CURSOR FOR S01111;"
* EXEC SQL DECLARE C01111 CURSOR FOR S01111 END-EXEC
DISPLAY " "
DISPLAY "OPEN C01111;"
* EXEC SQL OPEN C01111;
CALL "SUB7" USING SQLCODE SQLSTATE, SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
GO TO P100
END-IF
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C01111 INTO :int1;"
* EXEC SQL FETCH C01111 INTO :int1;
CALL "SUB8" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
DISPLAY "int1 should not be 1; its value is ", int1
if (int1 = 1) then
MOVE 0 TO flag
END-IF
.
P100.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P100"
END-IF
DISPLAY "SQLCODE is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "CLOSE C01111;"
* EXEC SQL CLOSE C01111;
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "dstmt=""INSERT INTO FLATER.GRANT011 VALUES (0)"""
MOVE "INSERT INTO FLATER.GRANT011 VALUES (0) "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB10" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "dstmt=""UPDATE FLATER.GRANT011 SET C1 = 0"""
MOVE "UPDATE FLATER.GRANT011 SET C1 = 0 "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB11" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "dstmt=""DELETE FROM FLATER.GRANT011"""
MOVE "DELETE FROM FLATER.GRANT011 "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB12" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE 3 TO waitin
GO TO P195
*token == 3
.
P190.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P190"
END-IF
DISPLAY "Program 'B' trying to access select-only table."
DISPLAY "dstmt=""SELECT COUNT(*) FROM FLATER.GRANT011"""
MOVE "SELECT COUNT(*) FROM FLATER.GRANT011 "
TO dstmt
DISPLAY "PREPARE S01112 FROM :dstmt;"
* EXEC SQL PREPARE S01112 FROM :dstmt;
CALL "SUB14" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C01112 CURSOR FOR S01112;"
* EXEC SQL DECLARE C01112 CURSOR FOR S01112 END-EXEC
DISPLAY " "
DISPLAY "OPEN C01112;"
* EXEC SQL OPEN C01112;
CALL "SUB15" USING SQLCODE SQLSTATE, SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C01112 INTO :int1;"
* EXEC SQL FETCH C01112 INTO :int1;
CALL "SUB16" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C01112;"
* EXEC SQL CLOSE C01112;
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "dstmt=""INSERT INTO FLATER.GRANT011 VALUES (0)"""
MOVE "INSERT INTO FLATER.GRANT011 VALUES (0) "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB18" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "dstmt=""UPDATE FLATER.GRANT011 SET C1 = 0"""
MOVE "UPDATE FLATER.GRANT011 SET C1 = 0 "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB19" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "dstmt=""DELETE FROM FLATER.GRANT011"""
MOVE "DELETE FROM FLATER.GRANT011 "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB20" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE 5 TO waitin
GO TO P195
*token == 5
.
P189.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P189"
END-IF
DISPLAY "Program 'B' trying to use all privileges."
DISPLAY "dstmt=""SELECT COUNT(*) FROM FLATER.GRANT011"""
MOVE "SELECT COUNT(*) FROM FLATER.GRANT011 "
TO dstmt
DISPLAY "PREPARE S01114 FROM :dstmt;"
* EXEC SQL PREPARE S01114 FROM :dstmt;
CALL "SUB22" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C01114 CURSOR FOR S01114;"
* EXEC SQL DECLARE C01114 CURSOR FOR S01114 END-EXEC
DISPLAY " "
DISPLAY "OPEN C01114;"
* EXEC SQL OPEN C01114;
CALL "SUB23" USING SQLCODE SQLSTATE, SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C01114 INTO :int1;"
* EXEC SQL FETCH C01114 INTO :int1;
CALL "SUB24" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C01114;"
* EXEC SQL CLOSE C01114;
CALL "SUB25" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "dstmt=""INSERT INTO FLATER.GRANT011 VALUES (0)"""
MOVE "INSERT INTO FLATER.GRANT011 VALUES (0) "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB26" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "OPEN C01114;"
* EXEC SQL OPEN C01114;
CALL "SUB23" USING SQLCODE SQLSTATE, SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C01114 INTO :int1;"
* EXEC SQL FETCH C01114 INTO :int1;
CALL "SUB28" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C01114;"
* EXEC SQL CLOSE C01114;
CALL "SUB29" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "dstmt=""UPDATE FLATER.GRANT011 SET C1 = 0"""
MOVE "UPDATE FLATER.GRANT011 SET C1 = 0 "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB30" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "dstmt=""SELECT COUNT(*) FROM FLATER.GRANT011 WHERE
- " C1 = 0"""
MOVE "SELECT COUNT(*) FROM FLATER.GRANT011 WHERE C1 = 0 "
TO dstmt
DISPLAY "PREPARE S01113 FROM :dstmt;"
* EXEC SQL PREPARE S01113 FROM :dstmt;
CALL "SUB31" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C01113 CURSOR FOR S01113;"
* EXEC SQL DECLARE C01113 CURSOR FOR S01113 END-EXEC
DISPLAY " "
DISPLAY "OPEN C01113;"
* EXEC SQL OPEN C01113;
CALL "SUB32" USING SQLCODE SQLSTATE, SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C01113 INTO :int1;"
* EXEC SQL FETCH C01113 INTO :int1;
CALL "SUB33" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C01113;"
* EXEC SQL CLOSE C01113;
CALL "SUB34" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "dstmt=""DELETE FROM FLATER.GRANT011"""
MOVE "DELETE FROM FLATER.GRANT011 "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB35" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "OPEN C01114;"
* EXEC SQL OPEN C01114;
CALL "SUB23" USING SQLCODE SQLSTATE, SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C01114 INTO :int1;"
* EXEC SQL FETCH C01114 INTO :int1;
CALL "SUB37" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 0; its value is ", int1
if (int1 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C01114;"
* EXEC SQL CLOSE C01114;
CALL "SUB38" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB39" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "Program 'B' trying to use grant option (should
- " fail)."
DISPLAY "dstmt=""GRANT SELECT ON FLATER.GRANT011 TO
- " SCHANZLE"""
MOVE "GRANT SELECT ON FLATER.GRANT011 TO SCHANZLE "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB40" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be >= 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 01007; its value is ", SQLSTATE
if (SQLCODE < 0 OR SQLSTATE NOT = "01007") then
MOVE 0 TO flag
END-IF
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB41" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE waitin = -1
.
P195.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P195"
END-IF
MOVE 0 TO fails
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
DISPLAY "Incrementing token"
.
P193.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P193"
END-IF
* EXEC SQL UPDATE TOKENS SET TOKEN_NO = TOKEN_NO + 1
* WHERE PROG_NO = :progno;
CALL "SUB42" USING SQLCODE SQLSTATE progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 019
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB43" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P193
END-IF
* EXEC SQL COMMIT WORK;
CALL "SUB44" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 020
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB45" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P193
END-IF
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
GO TO P194
*after token == 5
.
P197.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P197"
END-IF
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0629','pass','MCO');
CALL "SUB46" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " mpb011.sco *** fail *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0629','fail','MCO');
CALL "SUB47" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB48" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0629 ********************
******************** BEGIN TEST0630 *******************
MOVE 1 TO flag
DISPLAY " TEST0630 "
DISPLAY " (dynamic)"
DISPLAY " This is program 'B'"
DISPLAY "References:"
DISPLAY " 11.37 "
DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features
- " 1, 3"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
DISPLAY "You should have already started Program A."
MOVE 1 TO waitin
.
P160.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P160"
END-IF
if (waitin = -1) then
GO TO P163
END-IF
MOVE 0 TO fails
COMPUTE oldtok = -1
DISPLAY "Waiting for the token to reach ", waitin, "."
.
P161.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P161"
END-IF
COMPUTE int1 = -1
* EXEC SQL SELECT TOKEN_NO INTO :int1 FROM HU.TOKENS
* WHERE PROG_NO = :progno;
CALL "SUB49" USING SQLCODE SQLSTATE int1 progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
END-IF
if (int1 NOT = oldtok AND SQLCODE NOT < 0 AND
SQLCODE NOT = 100 ) then
DISPLAY "Token = ", int1
MOVE int1 TO oldtok
MOVE 0 TO fails
END-IF
if (SQLCODE < 0 OR SQLCODE = 100 OR int1 NOT =
waitin) then
*Waste time and try again
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ = "21000") then
GO TO P198
END-IF
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 021
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB50" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P161
END-IF
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
if (int1 = 1) then
GO TO P162
END-IF
if (int1 = 3) then
GO TO P170
END-IF
GO TO P163
*token == 1
.
P162.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P162"
END-IF
DISPLAY "Program 'B' trying to access insert-only table."
DISPLAY "dstmt=""SELECT COUNT(*) FROM FLATER.GRANT011"""
MOVE "SELECT COUNT(*) FROM FLATER.GRANT011 "
TO dstmt
DISPLAY "PREPARE S01121 FROM :dstmt;"
* EXEC SQL PREPARE S01121 FROM :dstmt;
CALL "SUB51" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
GO TO P101
END-IF
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C01121 CURSOR FOR S01121;"
* EXEC SQL DECLARE C01121 CURSOR FOR S01121 END-EXEC
DISPLAY " "
DISPLAY "OPEN C01121;"
* EXEC SQL OPEN C01121;
CALL "SUB52" USING SQLCODE SQLSTATE, SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
GO TO P101
END-IF
PERFORM CHCKOK
DISPLAY " "
DISPLAY "FETCH C01121 INTO :int1;"
* EXEC SQL FETCH C01121 INTO :int1;
CALL "SUB53" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
.
P101.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P101"
END-IF
DISPLAY "SQLCODE is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "CLOSE C01121;"
* EXEC SQL CLOSE C01121;
CALL "SUB54" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "dstmt=""INSERT INTO FLATER.GRANT011 VALUES (0)"""
MOVE "INSERT INTO FLATER.GRANT011 VALUES (0) "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB55" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "dstmt=""UPDATE FLATER.GRANT011 SET C1 = 0"""
MOVE "UPDATE FLATER.GRANT011 SET C1 = 0 "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB56" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "dstmt=""DELETE FROM FLATER.GRANT011"""
MOVE "DELETE FROM FLATER.GRANT011 "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB57" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB58" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE 3 TO waitin
GO TO P164
*token == 3
.
P170.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P170"
END-IF
DISPLAY "Program 'B' trying to access inaccessible table."
DISPLAY "dstmt=""SELECT COUNT(*) FROM FLATER.GRANT011"""
MOVE "SELECT COUNT(*) FROM FLATER.GRANT011 "
TO dstmt
DISPLAY "PREPARE S01122 FROM :dstmt;"
* EXEC SQL PREPARE S01122 FROM :dstmt;
CALL "SUB59" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
GO TO P102
END-IF
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C01122 CURSOR FOR S01122;"
* EXEC SQL DECLARE C01122 CURSOR FOR S01122 END-EXEC
DISPLAY " "
DISPLAY "OPEN C01122;"
* EXEC SQL OPEN C01122;
CALL "SUB60" USING SQLCODE SQLSTATE, SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
GO TO P102
END-IF
PERFORM CHCKOK
DISPLAY " "
DISPLAY "FETCH C01122 INTO :int1;"
* EXEC SQL FETCH C01122 INTO :int1;
CALL "SUB61" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
.
P102.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P102"
END-IF
DISPLAY "SQLCODE is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "CLOSE C01122;"
* EXEC SQL CLOSE C01122;
CALL "SUB62" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "dstmt=""INSERT INTO FLATER.GRANT011 VALUES (0)"""
MOVE "INSERT INTO FLATER.GRANT011 VALUES (0) "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB63" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "dstmt=""UPDATE FLATER.GRANT011 SET C1 = 0"""
MOVE "UPDATE FLATER.GRANT011 SET C1 = 0 "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB64" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "dstmt=""DELETE FROM FLATER.GRANT011"""
MOVE "DELETE FROM FLATER.GRANT011 "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB65" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT < 0 OR NORMSQ NOT = "42000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "42000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB66" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE waitin = -1
.
P164.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P164"
END-IF
MOVE 0 TO fails
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
DISPLAY "Incrementing token"
.
P165.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P165"
END-IF
* EXEC SQL UPDATE TOKENS SET TOKEN_NO = TOKEN_NO + 1
* WHERE PROG_NO = :progno;
CALL "SUB67" USING SQLCODE SQLSTATE progno
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 022
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB68" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P165
END-IF
* EXEC SQL COMMIT WORK;
CALL "SUB69" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (SQLCODE < 0) then
*Waste time and try again
DISPLAY "SQLCODE = ", SQL-COD, " SQLSTATE = '",
SQLSTATE, "'"
COMPUTE fails = fails + 1
if (fails > maxfls) then
GO TO P199
END-IF
*TEd hook for fixing delays: 023
PERFORM SLEEEP THRU P133
* EXEC SQL ROLLBACK WORK;
CALL "SUB70" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
GO TO P165
END-IF
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
GO TO P160
*after token == 3
.
P163.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P163"
END-IF
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0630','pass','MCO');
CALL "SUB71" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " mpb011.sco *** fail *** "
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0630','fail','MCO');
CALL "SUB72" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB73" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0630 ********************
STOP RUN.
P198.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P198"
END-IF
DISPLAY "CARDINALITY VIOLATION"
.
P199.
if (debug1 NOT = 0) then
DISPLAY "Debug trace: P199"
END-IF
if (fails > maxfls) then
DISPLAY "The number of attempts (fails) exceeds variable
- " maxfls."
DISPLAY "Increase the value of variable maxfls, if
- " needed."
DISPLAY "Or, increase the value of variable pauze."
END-IF
DISPLAY "MAYDAY MAYDAY PROGRAM ABORTING"
DISPLAY "You will have to start this test over."
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
SLEEEP.
COMPUTE repcnt = fails * pauze
if (repcnt > 17) then
COMPUTE repcnt = repcnt * repcnt + pauze2
END-IF
MOVE 1 TO iii
.
P133.
* EXEC SQL COMMIT WORK;
CALL "SUB74" USING SQLCODE SQLSTATE
COMPUTE int1 = -1
* EXEC SQL UPDATE HU.WORKS
* SET HOURS = -1 WHERE HOURS = :int1;
CALL "SUB75" USING SQLCODE SQLSTATE int1
COMPUTE iii = iii + 1
if (iii < repcnt) then
GO TO P133
END-IF
.
¤ Dauer der Verarbeitung: 0.65 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
