Quellcode-Bibliothek
© Kompilation durch diese Firma
[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]
Datei:
dml183.mco
Sprache: Unknown
IDENTIFICATION DIVISION.
PROGRAM-ID. DML126.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "DML126.SCO") calling SQL
* procedures in file "DML126.MCO".
****************************************************************
*
* COMMENT SECTION
*
* DATE 1994/7/1 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* DML126.SCO
* WRITTEN BY: David W. Flater
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests Dynamic SQL SQLSTATEs and F# 12.
*
* REFERENCES
* FIPS PUB 127-2 14.1 Transitional SQL
* ANSI SQL-1992
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 dstmt PIC X(50).
01 ch1 PIC X(10).
01 ch2 PIC X(10).
01 cmd PIC X(21).
01 cmd2 PIC X(21).
01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "FLATER " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid " expected. User ", uidx "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, dml126.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0660 *******************
MOVE 1 TO flag
DISPLAY " TEST0660 "
DISPLAY " Dynamic SQL SQLSTATEs"
DISPLAY "References:"
DISPLAY " F# 1 -- Dynamic SQL"
DISPLAY " 22.1 -- SQLSTATE"
DISPLAY " 17.6 GR.9.b"
DISPLAY " 17.9 GR.5.a GR.6.a"
DISPLAY " 17.10 GR.4"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*07003 cursor specification cannot be executed
*This one cannot be generated in TSQL because first you have to
*violate the syntactical leveling rule against specifying INTO
*with an EXECUTE.
*07005 prepared statement not a cursor specification
*Before correction: 17.6 GR.9.b.ii
*After correction: 17.6 GR.9.b.i
*4.22 <dynamic declare cursor> is declarative - not executable
DISPLAY "DECLARE C12611 CURSOR FOR S12611;"
* EXEC SQL DECLARE C12611 CURSOR FOR S12611 END-EXEC
DISPLAY " "
DISPLAY "dstmt=""INSERT INTO CONCATBUF VALUES (?)"""
MOVE "INSERT INTO CONCATBUF VALUES (?) "
TO dstmt
*07005 cannot be pushed back to the open (see above citation)
DISPLAY "PREPARE S12611 FROM :dstmt;"
* EXEC SQL PREPARE S12611 FROM :dstmt;
CALL "SUB3" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 07005; its value is ", SQLSTATE
if (SQLSTATE NOT = "07005" OR SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "OPEN C12611;"
* EXEC SQL OPEN C12611;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SQLSTATE should be 26000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "26000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "26000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "CLOSE C12611;"
* EXEC SQL CLOSE C12611;
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "PREPARE S12613 FROM :dstmt;"
* EXEC SQL PREPARE S12613 FROM :dstmt;
CALL "SUB6" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*07006 restricted data type attribute violation
*See test 0658
*07001 using clause does not match dynamic parameter specificati
*17.9 GR.5.a
MOVE "xxxxxxxxxx" TO ch1
MOVE "xxxxxxxxxx" TO ch2
DISPLAY "EXECUTE S12613 USING :ch1, :ch2;"
* EXEC SQL EXECUTE S12613 USING :ch1, :ch2;
CALL "SUB7" USING SQLCODE SQLSTATE ch1 ch2
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 07001; its value is ", SQLSTATE
if (SQLSTATE NOT = "07001" OR SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
*07002 using clause does not match target specifications
*17.9 GR.6.a
DISPLAY "dstmt=""SELECT * FROM HU.WORKS WHERE HOURS = ?"""
MOVE "SELECT * FROM HU.WORKS WHERE HOURS = ?
- " " TO dstmt
DISPLAY "PREPARE S12612 FROM :dstmt;"
* EXEC SQL PREPARE S12612 FROM :dstmt;
CALL "SUB8" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C12612 CURSOR FOR S12612;"
* EXEC SQL DECLARE C12612 CURSOR FOR S12612 END-EXEC
DISPLAY " "
MOVE 12 TO int1
DISPLAY "OPEN C12612 USING :int1;"
* EXEC SQL OPEN C12612 USING :int1;
CALL "SUB9" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "FETCH C12612 INTO :ch1;"
* EXEC SQL FETCH C12612 INTO :ch1;
CALL "SUB10" USING SQLCODE SQLSTATE ch1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 07002; its value is ", SQLSTATE
if (SQLSTATE NOT = "07002" OR SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C12612;"
* EXEC SQL CLOSE C12612;
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*07001 using clause does not match dynamic parameter specificati
*17.9 GR.5.a
MOVE 12 TO int1
MOVE "xxxxxxxxxx" TO ch1
DISPLAY "OPEN C12612 USING :int1, :ch1;"
* EXEC SQL OPEN C12612 USING :int1, :ch1;
CALL "SUB12" USING SQLCODE SQLSTATE int1 ch1
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 07001; its value is ", SQLSTATE
if (SQLSTATE NOT = "07001" OR SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C12612;"
* EXEC SQL CLOSE C12612;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*07004 using clause required for dynamic parameters
*17.14 GR.3
DISPLAY "OPEN C12612;"
* EXEC SQL OPEN C12612;
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 07004; its value is ", SQLSTATE
if (SQLSTATE NOT = "07004" OR SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C12612;"
* EXEC SQL CLOSE C12612;
CALL "SUB15" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*07004 using clause required for dynamic parameters
*17.10 GR.4
DISPLAY "EXECUTE S12613;"
* EXEC SQL EXECUTE S12613;
CALL "SUB16" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 07004; its value is ", SQLSTATE
if (SQLSTATE NOT = "07004" OR SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
*07007 using clause required for result fields
*This one cannot be generated in TSQL because first you have to
*violate the syntactical leveling rule against specifying INTO
*with an EXECUTE.
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0660','pass','MCO');
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml126.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0660','fail','MCO');
CALL "SUB19" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB20" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0660 ********************
******************** BEGIN TEST0670 *******************
MOVE 1 TO flag
DISPLAY " TEST0670"
DISPLAY " Diagnostics: COMMAND_FUNCTION (dynamic)"
DISPLAY "References:"
DISPLAY " F# 12 -- Get diagnostics"
DISPLAY " 18.1 -- "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*ALLOCATE DESCRIPTOR
DISPLAY "ALLOCATE DESCRIPTOR 'YAWL';"
* EXEC SQL ALLOCATE DESCRIPTOR 'YAWL';
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;
CALL "SUB22" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'ALLOCATE DESCRIPTOR '; its value
- " is ", cmd
if (cmd NOT = "ALLOCATE DESCRIPTOR ") then
MOVE 0 TO flag
END-IF
*SET DESCRIPTOR
DISPLAY "SET DESCRIPTOR 'YAWL' COUNT = 1;"
* EXEC SQL SET DESCRIPTOR 'YAWL' COUNT = 1;
CALL "SUB23" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;
CALL "SUB24" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'SET DESCRIPTOR '; its value
- " is ", cmd
if (cmd NOT = "SET DESCRIPTOR ") then
MOVE 0 TO flag
END-IF
*PREPARE
DISPLAY "dstmt=""SELECT HOURS FROM HU.WORKS"""
MOVE "SELECT HOURS FROM HU.WORKS "
TO dstmt
DISPLAY "PREPARE S12621 FROM :dstmt;"
* EXEC SQL PREPARE S12621 FROM :dstmt;
CALL "SUB25" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;
CALL "SUB26" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'PREPARE '; its value
- " is ", cmd
if (cmd NOT = "PREPARE ") then
MOVE 0 TO flag
END-IF
*DESCRIBE
DISPLAY "DESCRIBE S12621 USING SQL DESCRIPTOR 'YAWL';"
* EXEC SQL DESCRIBE S12621 USING SQL DESCRIPTOR 'YAWL'
* ;
CALL "SUB27" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;
CALL "SUB28" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'DESCRIBE '; its value
- " is ", cmd
if (cmd NOT = "DESCRIBE ") then
MOVE 0 TO flag
END-IF
*GET DESCRIPTOR
DISPLAY "GET DESCRIPTOR 'YAWL' :int1 = COUNT;"
* EXEC SQL GET DESCRIPTOR 'YAWL' :int1 = COUNT;
CALL "SUB29" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;
CALL "SUB30" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'GET DESCRIPTOR '; its value
- " is ", cmd
if (cmd NOT = "GET DESCRIPTOR ") then
MOVE 0 TO flag
END-IF
*DEALLOCATE DESCRIPTOR
DISPLAY "DEALLOCATE DESCRIPTOR 'YAWL';"
* EXEC SQL DEALLOCATE DESCRIPTOR 'YAWL';
CALL "SUB31" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;
CALL "SUB32" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'DEALLOCATE DESCRIPTOR'; its value
- " is ", cmd
if (cmd NOT = "DEALLOCATE DESCRIPTOR") then
MOVE 0 TO flag
END-IF
*DYNAMIC OPEN
DISPLAY "DECLARE C12621 CURSOR FOR S12621;"
* EXEC SQL DECLARE C12621 CURSOR FOR S12621 END-EXEC
DISPLAY "OPEN C12621;"
* EXEC SQL OPEN C12621;
CALL "SUB33" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;
CALL "SUB34" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'DYNAMIC OPEN '; its value
- " is ", cmd
if (cmd NOT = "DYNAMIC OPEN ") then
MOVE 0 TO flag
END-IF
*DYNAMIC FETCH
DISPLAY "FETCH C12621 INTO :int1;"
* EXEC SQL FETCH C12621 INTO :int1;
CALL "SUB35" USING SQLCODE SQLSTATE int1
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;
CALL "SUB36" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'DYNAMIC FETCH '; its value
- " is ", cmd
if (cmd NOT = "DYNAMIC FETCH ") then
MOVE 0 TO flag
END-IF
*DYNAMIC UPDATE CURSOR
DISPLAY "UPDATE HU.WORKS SET HOURS = 10"
DISPLAY " WHERE CURRENT OF C12621;"
* EXEC SQL UPDATE HU.WORKS SET HOURS = 10
* WHERE CURRENT OF C12621;
CALL "SUB37" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;
CALL "SUB38" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'DYNAMIC UPDATE CURSOR'; its value
- " is ", cmd
if (cmd NOT = "DYNAMIC UPDATE CURSOR") then
MOVE 0 TO flag
END-IF
*DYNAMIC DELETE CURSOR (<dynamic delete statement: positioned>)
DISPLAY "DELETE FROM HU.WORKS WHERE CURRENT OF C12621;"
* EXEC SQL DELETE FROM HU.WORKS WHERE CURRENT OF C12621
* ;
CALL "SUB39" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;
CALL "SUB40" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'DYNAMIC DELETE CURSOR'; its value
- " is ", cmd
if (cmd NOT = "DYNAMIC DELETE CURSOR") then
MOVE 0 TO flag
END-IF
*DYNAMIC CLOSE
DISPLAY "CLOSE C12621;"
* EXEC SQL CLOSE C12621;
CALL "SUB41" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;
CALL "SUB42" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'DYNAMIC CLOSE '; its value
- " is ", cmd
if (cmd NOT = "DYNAMIC CLOSE ") then
MOVE 0 TO flag
END-IF
*EXECUTE
DISPLAY "dstmt=""INSERT INTO CONCATBUF VALUES ('SPAM')"""
MOVE "INSERT INTO CONCATBUF VALUES ('SPAM') "
TO dstmt
DISPLAY "PREPARE S12622 FROM :dstmt;"
* EXEC SQL PREPARE S12622 FROM :dstmt;
CALL "SUB43" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
DISPLAY "EXECUTE S12622;"
* EXEC SQL EXECUTE S12622;
CALL "SUB44" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;
CALL "SUB45" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'EXECUTE '; its value
- " is ", cmd
if (cmd NOT = "EXECUTE ") then
MOVE 0 TO flag
END-IF
*EXECUTE IMMEDIATE
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB46" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = COMMAND_FUNCTION;
CALL "SUB47" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'EXECUTE IMMEDIATE '; its value
- " is ", cmd
if (cmd NOT = "EXECUTE IMMEDIATE ") then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB48" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0670','pass','MCO');
CALL "SUB49" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml126.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0670','fail','MCO');
CALL "SUB50" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB51" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0670 ********************
******************** BEGIN TEST0671 *******************
MOVE 1 TO flag
DISPLAY " TEST0671"
DISPLAY " Diagnostics: DYNAMIC_FUNCTION"
DISPLAY "References:"
DISPLAY " F# 12 -- Get diagnostics"
DISPLAY " 18.1 -- "
DISPLAY " TC #2 18.1 -- info from "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "INSERT INTO CONCATBUF VALUES ('AAA');"
* EXEC SQL INSERT INTO CONCATBUF VALUES ('AAA');
CALL "SUB52" USING SQLCODE SQLSTATE
DISPLAY " "
*SELECT
DISPLAY "dstmt=""SELECT COUNT(*) FROM USIG"""
MOVE "SELECT COUNT(*) FROM USIG
- " " TO dstmt
DISPLAY "PREPARE S12631 FROM :dstmt;"
* EXEC SQL PREPARE S12631 FROM :dstmt;
CALL "SUB53" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;
CALL "SUB54" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'SELECT '; its value
- " is ", cmd
if (cmd NOT = "SELECT ") then
MOVE 0 TO flag
END-IF
*Intentional repetition -- GET DIAGNOSTICS should not set diagno
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;
CALL "SUB55" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'SELECT '; its value
- " is ", cmd
if (cmd NOT = "SELECT ") then
MOVE 0 TO flag
END-IF
*DELETE WHERE
DISPLAY "dstmt=""DELETE FROM CONCATBUF"""
MOVE "DELETE FROM CONCATBUF "
TO dstmt
DISPLAY "PREPARE S12632 FROM :dstmt;"
* EXEC SQL PREPARE S12632 FROM :dstmt;
CALL "SUB56" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;
CALL "SUB57" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'DELETE WHERE '; its value
- " is ", cmd
if (cmd NOT = "DELETE WHERE ") then
MOVE 0 TO flag
END-IF
*INSERT
DISPLAY "dstmt=""INSERT INTO CONCATBUF VALUES (?)"""
MOVE "INSERT INTO CONCATBUF VALUES (?) "
TO dstmt
DISPLAY "PREPARE S12633 FROM :dstmt;"
* EXEC SQL PREPARE S12633 FROM :dstmt;
CALL "SUB58" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;
CALL "SUB59" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'INSERT '; its value
- " is ", cmd
if (cmd NOT = "INSERT ") then
MOVE 0 TO flag
END-IF
*UPDATE WHERE
DISPLAY "dstmt=""UPDATE CONCATBUF SET ZZ = ?"""
MOVE "UPDATE CONCATBUF SET ZZ = ? "
TO dstmt
DISPLAY "PREPARE S12634 FROM :dstmt;"
* EXEC SQL PREPARE S12634 FROM :dstmt;
CALL "SUB60" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;
CALL "SUB61" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'UPDATE WHERE '; its value
- " is ", cmd
if (cmd NOT = "UPDATE WHERE ") then
MOVE 0 TO flag
END-IF
*Unrecognized statement: TC #2 18.1
*If your database recognizes FROB, change it to a command
*that it doesn't recognize. This should not be rejected at
*compile time because it's Dynamic SQL.
DISPLAY "dstmt=""FROB"""
MOVE "FROB "
TO dstmt
DISPLAY "PREPARE S12635 FROM :dstmt;"
* EXEC SQL PREPARE S12635 FROM :dstmt;
CALL "SUB62" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd2
DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION,"
DISPLAY " :cmd2 = COMMAND_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION,
* :cmd2 = COMMAND_FUNCTION;
CALL "SUB63" USING SQLCODE SQLSTATE cmd cmd2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be ' '; its value
- " is '", cmd, "'"
if (cmd NOT = " ") then
MOVE 0 TO flag
END-IF
DISPLAY "cmd2 should be 'PREPARE '; its value
- " is '", cmd2, "'"
if (cmd2 NOT = "PREPARE ") then
MOVE 0 TO flag
END-IF
*Execute UPDATE WHERE
MOVE "If an SQL-transaction" TO cmd
DISPLAY "cmd = ", cmd
DISPLAY "EXECUTE S12634 USING :cmd;"
* EXEC SQL EXECUTE S12634 USING :cmd;
CALL "SUB64" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;
CALL "SUB65" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'UPDATE WHERE '; its value
- " is ", cmd
if (cmd NOT = "UPDATE WHERE ") then
MOVE 0 TO flag
END-IF
*Frob even faster
*If your database recognizes FROB, change it to a command
*that it doesn't recognize. This should not be rejected at
*compile time because it's Dynamic SQL.
DISPLAY "dstmt=""FROB"""
MOVE "FROB "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB66" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;
CALL "SUB67" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be ' '; its value
- " is '", cmd "'"
if (cmd NOT = " ") then
MOVE 0 TO flag
END-IF
*Execute immediate INSERT
DISPLAY "dstmt=""INSERT INTO CONCATBUF VALUES ('FNORD')"""
MOVE "INSERT INTO CONCATBUF VALUES ('FNORD') "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
* EXEC SQL EXECUTE IMMEDIATE :dstmt;
CALL "SUB68" USING SQLCODE SQLSTATE dstmt
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;
CALL "SUB69" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'INSERT '; its value
- " is ", cmd
if (cmd NOT = "INSERT ") then
MOVE 0 TO flag
END-IF
*Executed DELETE WHERE
DISPLAY "EXECUTE S12632;"
* EXEC SQL EXECUTE S12632;
CALL "SUB70" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
MOVE "xxxxxxxxxxxxxxxxxxxxx" TO cmd
DISPLAY "GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;"
* EXEC SQL GET DIAGNOSTICS :cmd = DYNAMIC_FUNCTION;
CALL "SUB71" USING SQLCODE SQLSTATE cmd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "cmd should be 'DELETE WHERE '; its value
- " is ", cmd
if (cmd NOT = "DELETE WHERE ") then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB72" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0671','pass','MCO');
CALL "SUB73" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml126.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0671','fail','MCO');
CALL "SUB74" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB75" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST0671 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
[ Dauer der Verarbeitung: 0.20 Sekunden
(vorverarbeitet)
]
|
|
