|
IDENTIFICATION DIVISION.
PROGRAM-ID. YTS814.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "YTS814.SCO") calling SQL
* procedures in file "YTS814.MCO".
*Copyright 1996 National Computing Centre Ltd,
*and Computer Logic R&D S.A
*on behalf of CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* YTS814.SCO
* WRITTEN BY: Susan Watters
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests <module character set specification>
*
*
* REFERENCES
* 12.2 <module name clause>
* 5.3 SR.6a <literal>
* 5.4 SR.1a Names and identifiers
* 6.1 GR.1 <data types>
* 19.1 SR.14b <embedded SQL host program>,derived<module>
* F#45 Character set definition
* F#46 Named character sets
* F#3 Basic schema manipulation
* F#2 Basic information schema
*
* DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
*
* QA Status: Full FC
*
* Revised by DWF 1996-04-04
* Added rollback after authid
* Added timestamp
* Added FIPS
* Cleanups
* Fixed printouts
* Fixed test reporting
* Fixed cursor usage
* Fixed SDL transactions
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 co PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 co2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 co3 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 val1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 val2 PIC X(1).
01 uid PIC X(18).
01 uidx PIC X(18).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, yts814.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7571 *******************
MOVE 1 TO flag
DISPLAY " FIPS TEST7571 "
DISPLAY " "
DISPLAY "References:"
DISPLAY " 12.2
DISPLAY " 5.3 SR.6a "
DISPLAY " 5.4 SR.1a Names and identifiers"
DISPLAY " 6.1 GR.1 "
DISPLAY " 19.1 SR.14b ,"
DISPLAY " derived "
DISPLAY " F#45 Character set definition"
DISPLAY " F#46 Named character sets"
DISPLAY " F#3 Basic schema manipulation"
DISPLAY " F#2 Basic information schema"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "!!!!!! This program requires the use of
- " characters"
DISPLAY "in the LATIN1 character set.!!!!!! "
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*initialise all host variables
MOVE 99 TO co
MOVE 99 TO co2
MOVE 99 TO co3
*The names of the table and both its columns
*include letters from LATIN1
DISPLAY "CREATE TABLE TAB���"
DISPLAY "(COL� INTEGER,"
DISPLAY "COL� CHAR(1) CHARACTER SET ASCII_GRAPHIC);"
* EXEC SQL CREATE TABLE TAB���
* (COL� INTEGER,
* COL� CHAR(1) CHARACTER SET ASCII_GRAPHIC);
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.TABLES"
DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND"
DISPLAY "TABLE_NAME = 'TAB���';"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.TABLES
* WHERE TABLE_SCHEMA = 'CTS1' AND
* TABLE_NAME = 'TAB���';
CALL "SUB5" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 1; its value is ", co
if (co NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "SELECT COUNT (*) INTO :co2"
DISPLAY "FROM INFORMATION_SCHEMA.COLUMNS"
DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND"
DISPLAY "TABLE_NAME = 'TAB���' AND"
DISPLAY "COLUMN_NAME = 'COL�';"
* EXEC SQL SELECT COUNT (*) INTO :co2
* FROM INFORMATION_SCHEMA.COLUMNS
* WHERE TABLE_SCHEMA = 'CTS1' AND
* TABLE_NAME = 'TAB���' AND
* COLUMN_NAME = 'COL�';
CALL "SUB6" USING SQLCODE SQLSTATE co2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co2 should be 1; its value is ", co2
if (co2 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "SELECT COUNT (*) INTO :co3"
DISPLAY "FROM INFORMATION_SCHEMA.COLUMNS"
DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND"
DISPLAY "TABLE_NAME = 'TAB���' AND"
DISPLAY "COLUMN_NAME = 'COL�';"
* EXEC SQL SELECT COUNT (*) INTO :co3
* FROM INFORMATION_SCHEMA.COLUMNS
* WHERE TABLE_SCHEMA = 'CTS1' AND
* TABLE_NAME = 'TAB���' AND
* COLUMN_NAME = 'COL�';
CALL "SUB7" USING SQLCODE SQLSTATE co3
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co3 should be 1; its value is ", co3
if (co3 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "INSERT INTO TAB��� VALUES"
DISPLAY "(1, _ASCII_GRAPHIC '#')"
* EXEC SQL INSERT INTO TAB��� VALUES
* (1, _ASCII_GRAPHIC '#');
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 2 TO val1
DISPLAY "val1 = 2;"
MOVE "^" TO val2
DISPLAY "val2 = '^'"
DISPLAY "INSERT INTO TAB��� VALUES"
DISPLAY "(:val1, :val2);"
* EXEC SQL INSERT INTO TAB��� VALUES
* (:val1, :val2);
CALL "SUB9" USING SQLCODE SQLSTATE val1 val2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO TAB��� VALUES"
DISPLAY "(3, _LATIN1 '�');"
* EXEC SQL INSERT INTO TAB��� VALUES
* (3, _LATIN1 '�');
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
*that should cause a data exception - character not
*in reportoire - code 22021
DISPLAY "SQLSTATE should be 22021; its value is ", SQLSTATE
if (SQLSTATE NOT = "22021") then
MOVE 0 TO flag
END-IF
*reinitialise host variables
MOVE 4 TO val1
MOVE "�" TO val2
DISPLAY "val1 = 4;"
DISPLAY "val2 = '�';"
DISPLAY "INSERT INTO TAB��� VALUES"
DISPLAY "(:val1, :val2);"
* EXEC SQL INSERT INTO TAB��� VALUES
* (:val1, :val2);
CALL "SUB11" USING SQLCODE SQLSTATE val1 val2
MOVE SQLCODE TO SQL-COD
*that should cause a data exception - character not
*in reportoire - code 22021
DISPLAY "SQLSTATE should be 22021; its value is ", SQLSTATE
if (SQLSTATE NOT = "22021") then
MOVE 0 TO flag
END-IF
DISPLAY "DECLARE AA CURSOR FOR"
DISPLAY "SELECT COL�, COL� FROM TAB���"
DISPLAY "ORDER BY COL�"
* EXEC SQL DECLARE AA CURSOR FOR
* SELECT COL�, COL� FROM TAB���
* ORDER BY COL� END-EXEC
DISPLAY "OPEN AA;"
* EXEC SQL OPEN AA;
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 99 TO val1
MOVE "x" TO val2
DISPLAY "FETCH AA INTO :val1, :val2;"
* EXEC SQL FETCH AA INTO :val1, :val2;
CALL "SUB13" USING SQLCODE SQLSTATE val1 val2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "val1 should be 1; its value is ", val1
DISPLAY "val2 should be #; its value is ", val2
if (val1 NOT = 1 OR val2 NOT = "#") then
MOVE 0 TO flag
END-IF
MOVE 99 TO val1
MOVE "x" TO val2
DISPLAY "FETCH AA INTO :val1, :val2;"
* EXEC SQL FETCH AA INTO :val1, :val2;
CALL "SUB14" USING SQLCODE SQLSTATE val1 val2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "val1 should be 2; its value is ", val1
DISPLAY "val2 should be ^; its value is ", val2
if (val1 NOT = 2 OR val2 NOT = "^") then
MOVE 0 TO flag
END-IF
* EXEC SQL FETCH AA INTO :val1, :val2;
CALL "SUB15" USING SQLCODE SQLSTATE val1 val2
MOVE SQLCODE TO SQL-COD
*that should produce a no data excepetion which is
*SQLSTATE 02000
DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 100 OR NORMSQ NOT = "02000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB16" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE TAB��� CASCADE;"
* EXEC SQL DROP TABLE TAB��� CASCADE;
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7571','pass','MCO');
CALL "SUB19" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts814.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7571','fail','MCO');
CALL "SUB20" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7571 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
[ zur Elbe Produktseite wechseln0.16Quellennavigators
Analyse erneut starten
]
|
