|
IDENTIFICATION DIVISION.
PROGRAM-ID. XTS727.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "XTS727.SCO") calling SQL
* procedures in file "XTS727.MCO".
*Copyright 1995 National Computing Centre Limited
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* XTS727.SCO
* WRITTEN BY: Vassilis Kogakis
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* Flagging - FULL SQL - <explicit table> in <query expression>
*
* REFERENCES
* 7.10 -- <query expression>
* 7.10 SR.2
* 7.10 SR.5b
* 7.10 LR.1b -- Intermediate SQL restriction which prohibits
* the use of <explicit table> in a <simple
* table> in a <query expression>
* F#37 -- Intermediate SQL Flagging.
*
* DATE LAST ALTERED 09/02/96 Alpha Release V1.0
*
* Cleanups and fixes by V. Kogakis 09/02/96
*
* Rewritten by V. Kogakis on 09/02/96
*
* Revised by DWF 1996-02-14
* Fixed char string lengths
* Fixed refs to non-existent columns
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 coun PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 c_num1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 c_num2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 c_ch1 PIC X(10).
01 c_ch2 PIC X(10).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Module COBOL, xts727.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7027 *******************
MOVE 1 TO flag
DISPLAY " TEST7027"
DISPLAY " Flagging - Full SQL - in
- " exprssn>"
DISPLAY " References "
DISPLAY " 7.10 -- "
DISPLAY " 7.10 SR.2"
DISPLAY " 7.10 SR.5b"
DISPLAY " 7.10 LR.1b Intermediate SQL restriction which
- " prohibits the"
DISPLAY " use of on a
- " expression> "
DISPLAY " F#37 -- Intermediate SQL Flagging."
DISPLAY " - - - - - - - - - - - - - - - - - - -"
*Initialise error reporting variables
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*initialise host variables
MOVE "xxxxxxxxxx" TO c_ch1
MOVE "xxxxxxxxxx" TO c_ch2
MOVE 0 TO c_num1
MOVE 0 TO c_num2
MOVE 0 TO coun
*Insert into TEST6840C all rows from table CL_STANDARD
DISPLAY "INSERT INTO TEST6840C"
DISPLAY "TABLE CL_STANDARD;"
* EXEC SQL INSERT INTO TEST6840C
* TABLE CL_STANDARD;
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "SELECT COUNT(*) INTO :coun FROM TEST6840C;"
* EXEC SQL SELECT COUNT(*) INTO :coun FROM TEST6840C;
CALL "SUB4" USING SQLCODE SQLSTATE coun
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "Coun should be 5; its value is: ", coun
if (coun NOT = 5) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*now check if all rows were inserted correctly
*First row
DISPLAY "SELECT NUM_C1,CH_C1,NUM_C2,CH_C2"
DISPLAY "INTO :c_num1,:c_ch1,:c_num2,:c_ch2"
DISPLAY "FROM TEST6840C"
DISPLAY "WHERE NUM_C1 = 1000;"
* EXEC SQL SELECT NUM_C1,CH_C1,NUM_C2,CH_C2
* INTO :c_num1,:c_ch1,:c_num2,:c_ch2
* FROM TEST6840C
* WHERE NUM_C1 = 1000;
CALL "SUB5" USING SQLCODE SQLSTATE c_num1 c_ch1 c_num2
c_ch2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
*check results returned by the <query specification>*
DISPLAY "NUM_C1 should be 1000; it is : ", c_num1
DISPLAY "CH_C1 should be NICKOS; it is : ", c_ch1
DISPLAY "NUM_C2 should be 4000; it is : ", c_num2
DISPLAY "CH_C2 should be ATHENS; it is : ", c_ch2
if (c_ch1 NOT = "NICKOS" OR c_ch2 NOT = "ATHENS")
then
MOVE 0 TO flag
END-IF
if (c_num2 NOT = 4000 OR c_num1 NOT = 1000) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*initialise host variables
MOVE "xxxxxxxxxx" TO c_ch1
MOVE "xxxxxxxxxx" TO c_ch2
MOVE 0 TO c_num1
MOVE 0 TO c_num2
*Second row
DISPLAY "SELECT NUM_C1,CH_C1,NUM_C2,CH_C2"
DISPLAY "INTO :c_num1,:c_ch1,:c_num2,:c_ch2"
DISPLAY "FROM TEST6840C"
DISPLAY "WHERE NUM_C1 = 1001;"
* EXEC SQL SELECT NUM_C1,CH_C1,NUM_C2,CH_C2
* INTO :c_num1,:c_ch1,:c_num2,:c_ch2
* FROM TEST6840C
* WHERE NUM_C1 = 1001;
CALL "SUB6" USING SQLCODE SQLSTATE c_num1 c_ch1 c_num2
c_ch2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
*check results returned by the <query specification>*
DISPLAY "NUM_C1 should be 1001; it is : ", c_num1
DISPLAY "CH_C1 should be MARIA; it is : ", c_ch1
DISPLAY "NUM_C2 should be 4001; it is : ", c_num2
DISPLAY "CH_C2 should be RHODES; it is : ", c_ch2
if (c_ch1 NOT = "MARIA" OR c_ch2 NOT = "RHODES")
then
MOVE 0 TO flag
END-IF
if (c_num2 NOT = 4001 OR c_num1 NOT = 1001) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*initialise host variables
MOVE "xxxxxxxxxx" TO c_ch1
MOVE "xxxxxxxxxx" TO c_ch2
MOVE 0 TO c_num1
MOVE 0 TO c_num2
*Third row
DISPLAY "SELECT NUM_C1,CH_C1,NUM_C2,CH_C2"
DISPLAY "INTO :c_num1,:c_ch1,:c_num2,:c_ch2"
DISPLAY "FROM TEST6840C"
DISPLAY "WHERE NUM_C1 = 1002;"
* EXEC SQL SELECT NUM_C1,CH_C1,NUM_C2,CH_C2
* INTO :c_num1,:c_ch1,:c_num2,:c_ch2
* FROM TEST6840C
* WHERE NUM_C1 = 1002;
CALL "SUB7" USING SQLCODE SQLSTATE c_num1 c_ch1 c_num2
c_ch2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
*check results returned by the <query specification>*
DISPLAY "NUM_C1 should be 1002; it is : ", c_num1
DISPLAY "CH_C1 should be MAKIS; it is : ", c_ch1
DISPLAY "NUM_C2 should be 4002; it is : ", c_num2
DISPLAY "CH_C2 should be HANIA; it is : ", c_ch2
if (c_ch1 NOT = "MAKIS" OR c_ch2 NOT = "HANIA")
then
MOVE 0 TO flag
END-IF
if (c_num2 NOT = 4002 OR c_num1 NOT = 1002) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*initialise host variables
MOVE "xxxxxxxxxx" TO c_ch1
MOVE "xxxxxxxxxx" TO c_ch2
MOVE 0 TO c_num1
MOVE 0 TO c_num2
*Forth row
DISPLAY "SELECT NUM_C1,CH_C1,NUM_C2,CH_C2"
DISPLAY "INTO :c_num1,:c_ch1,:c_num2,:c_ch2"
DISPLAY "FROM TEST6840C"
DISPLAY "WHERE NUM_C1 = 1003;"
* EXEC SQL SELECT NUM_C1,CH_C1,NUM_C2,CH_C2
* INTO :c_num1,:c_ch1,:c_num2,:c_ch2
* FROM TEST6840C
* WHERE NUM_C1 = 1003;
CALL "SUB8" USING SQLCODE SQLSTATE c_num1 c_ch1 c_num2
c_ch2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
*check results returned by the <query specification>*
DISPLAY "NUM_C1 should be 1003; it is : ", c_num1
DISPLAY "CH_C1 should be GEORGE; it is : ", c_ch1
DISPLAY "NUM_C2 should be 4003; it is : ", c_num2
DISPLAY "CH_C2 should be ARTA; it is : ", c_ch2
if (c_ch1 NOT = "GEORGE" OR c_ch2 NOT = "ARTA")
then
MOVE 0 TO flag
END-IF
if (c_num2 NOT = 4003 OR c_num1 NOT = 1003) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*initialise host variables
MOVE "xxxxxxxxxx" TO c_ch1
MOVE "xxxxxxxxxx" TO c_ch2
MOVE 0 TO c_num1
MOVE 0 TO c_num2
*Fifth row
DISPLAY "SELECT NUM_C1,CH_C1,NUM_C2,CH_C2"
DISPLAY "INTO :c_num1,:c_ch1,:c_num2,:c_ch2"
DISPLAY "FROM TEST6840C"
DISPLAY "WHERE NUM_C1 = 1004;"
* EXEC SQL SELECT NUM_C1,CH_C1,NUM_C2,CH_C2
* INTO :c_num1,:c_ch1,:c_num2,:c_ch2
* FROM TEST6840C
* WHERE NUM_C1 = 1004;
CALL "SUB9" USING SQLCODE SQLSTATE c_num1 c_ch1 c_num2
c_ch2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
*check results returned by the <query specification>*
DISPLAY "NUM_C1 should be 1004; it is : ", c_num1
DISPLAY "CH_C1 should be MORRIS; it is : ", c_ch1
DISPLAY "NUM_C2 should be 4004; it is : ", c_num2
DISPLAY "CH_C2 should be PARGA; it is : ", c_ch2
if (c_ch1 NOT = "MORRIS" OR c_ch2 NOT = "PARGA")
then
MOVE 0 TO flag
END-IF
if (c_num2 NOT = 4004 OR c_num1 NOT = 1004) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*restore table CL_STANDARD in its original state
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*record results
if ( flag = 1 ) then
DISPLAY " xts727.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7027','pass','MCO');
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "Intermediate SQL extension"
DISPLAY "Explicit table in "
DISPLAY "executed successfully."
DISPLAY "Vendor must demonstrate Intermediate Flagger
- " WARNING"
else
DISPLAY " xts727.mco *** NOGO *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7027','NOGO','MCO');
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
DISPLAY "Vendor does not support fully "
DISPLAY "Intermediate SQL extension "
DISPLAY "Support explicit table in query expression is
- " not required"
END-IF
DISPLAY "========================================"
* EXEC SQL COMMIT WORK;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7027 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
[ Verzeichnis aufwärts0.42unsichere Verbindung
Übersetzung europäischer Sprachen durch Browser
]
|
