|
IDENTIFICATION DIVISION.
PROGRAM-ID. XTS729.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "XTS729.SCO") calling SQL
* procedures in file "XTS729.MCO".
*Copyright 1995 National Computing Centre Limited
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* XTS729.SCO
* WRITTEN BY: Manolis Megaloikonomou
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* Column name with 19 and 128 characters - regular.
*
* REFERENCES
* 11.4 -- <column definition>
* 5.4 -- <Names and identifiers>
* 5.4 GR.4
* 5.4 SR.3
* 5.2 -- <token> and <separator>
* 5.2 SR.8
* 5.2 SR.10
* 5.2 SR.11
* 5.2 LR.2a -- Raised. Entry SQL restriction which
* restricted the length of a <regular identifier>
* up to 18 <character representation>s.
* 21.2.9 -- COLUMNS view.
* F#1 -- Dynamic SQL.
* F#2 -- Basic information schema.
* F#3 -- Basic schema manipulation.
* F#39 -- Long identifiers.
*
* DATE LAST ALTERED 14/12/95 CTS5 Hand-over Test
*
* Cleanups and fixes by V. Kogakis 05/12/95:
* Include Files
* Define NOSUBCLASS/CHCKOK at test beginning
* Define cal variable
* Fix Syntax errors
* Add ROLLBACK after AUTHID
* print timestamp
* delete multiple SQLCODE and SQLSTATE initialisation
* change string initialisation
* Clean-up database at the end of the test
*
* QA Status: Full FC
*
* Revised by DWF 1996-02-01
* Fixed SDL transactions
* Removed untranslatable field widths in printfs
* Fixed char string lengths
* Fixed opening & closing of wrong cursor
* Added whitespace where required in table definition
* Make variable names 6 chars
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 aa PIC X(149).
01 bb PIC X(10).
01 cc PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 dd PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ee PIC X(9).
01 sqlstm PIC X(190).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 int3 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 str1 PIC X(128).
01 str2 PIC X(128).
01 str3 PIC X(128).
01 str4 PIC X(128).
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, xts729.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7029 *******************
MOVE 1 TO flag
DISPLAY " TEST7029 "
DISPLAY " Column name with 19 and 128 characters -
- " regular."
DISPLAY "References:"
DISPLAY " 11.4 -- "
DISPLAY " 5.4 -- "
DISPLAY " 5.4 GR.4"
DISPLAY " 5.4 SR.3"
DISPLAY " 5.2 -- and "
DISPLAY " 5.2 SR.8"
DISPLAY " 5.2 SR.10"
DISPLAY " 5.2 SR.11"
DISPLAY " 5.2 LR.2a -- Raised. Entry SQL restriction
- " which"
DISPLAY " restricted the length of a
- " identifier>"
DISPLAY " up to 18
- " representation>s."
DISPLAY " 21.2.9 -- COLUMNS view."
DISPLAY " F#1 -- Dynamic SQL."
DISPLAY " F#2 -- Basic information schema."
DISPLAY " F#3 -- Basic schema manipulation."
DISPLAY " F#39 -- Long identifiers."
DISPLAY " - - - - - - - - - - - - - - - - - - -"
*Initialise error reporting variables
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*Set up long strings for comparison statements
MOVE "COLUMNOFCHARACTERDATATYPE123456789012345
- "6789012345678901234567890123456789012345
- "678901234567890123456789012345678901234567890123" TO
str1
MOVE "columnofcharacterdatatype123456789012345
- "6789012345678901234567890123456789012345
- "67890123456789012345678901234567890123456789012b" TO
str2
MOVE "cOlUmNoFNUMERIC1234567890123456789012345
- "6789012345678901234567890123456789012345
- "6789012345678901234567890123456789012345678901_0" TO
str3
MOVE "CoLuMnOfNUMERIC1234567890123456789012345
- "6789012345678901234567890123456789012345
- "6789012345678901234567890123456789012345678901_1" TO
str4
*Create table
*ensure all columns names are of length 19
*the first column is to upper case
*the second column is to be lower case
*the third and fourth cols are to combine upper & lower cases &
DISPLAY "CREATE TABLE TESTA6439"
DISPLAY "(COLUMNOFCHARACTERSA CHARACTER(10),"
DISPLAY " columnofcharactersb CHARACTER(10),"
DISPLAY " cOlUmNoFNUMERICss_0 NUMERIC(5),"
DISPLAY " cOlUmNoFNUMERICss_1 NUMERIC(5));"
* EXEC SQL CREATE TABLE TESTA6439
* (COLUMNOFCHARACTERSA CHARACTER(10),
* columnofcharactersb CHARACTER(10),
* cOlUmNoFNUMERICss_0 NUMERIC(5),
* cOlUmNoFNUMERICss_1 NUMERIC(5));
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*The NIST programming requirement for a maximum line length can
*be met in this test which checks for a column identifier of 128
*Create second table
*Ensure col names are a maximum width of 128 characters
DISPLAY "CREATE TABLE TESTB6439"
DISPLAY
"(COLUMNOFCHARACTERDATATYPE12345678901234567890
- "123456789012"
DISPLAY
"3456789012345678901234567890123456789012345678
- "901234567890"
DISPLAY "1234567890123 CHARACTER(3),"
DISPLAY
"columnofcharacterdatatype12345678901234567890
- "1234567890123"
DISPLAY
"456789012345678901234567890123456789012345678
- "9012345678901"
DISPLAY "23456789012b CHARACTER(3),"
DISPLAY
"cOlUmNoFNUMERIC123456789012345678901234567890
- "1234567890123"
DISPLAY
"4567890123456789012345678901234567890
- "123456789012345678901"
DISPLAY "2345678901_0 NUMERIC(5),"
DISPLAY
"CoLuMnOfNUMERIC12345678901234567890
- "12345678901234567890123"
DISPLAY
"4567890123456789012345678901234567890
- "123456789012345678901"
DISPLAY "2345678901_1 NUMERIC(5));"
* EXEC SQL CREATE TABLE TESTB6439
* (COLUMNOFCHARACTERDATATYPE12345678901234567890
* 123456789012345678901234567890123456789012345678
* 90123456789012345678901234567890123 CHARACTER(3),
* columnofcharacterdatatype12345678901234567890123
* 456789012345678901234567890123456789012345678901
* 2345678901234567890123456789012b CHARACTER(3),
* cOlUmNoFNUMERIC12345678901234567890123456789012345
* 67890123456789012345678901234567890123456789012345
* 67890123456789012345678901_0 NUMERIC(5),
* CoLuMnOfNUMERIC123456789012345678901234567890123456
* 789012345678901234567890123456789012345678901234567
* 890123456789012345678901_1 NUMERIC(5));
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO CTS1.TESTA6439"
DISPLAY "VALUES('ABCD','DCBA',1,9999);"
* EXEC SQL INSERT INTO CTS1.TESTA6439
* VALUES('ABCD','DCBA',1,9999);
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE "xxxxxxxxxx" TO bb
MOVE 99 TO cc
MOVE 99 TO dd
DISPLAY "SELECT COLUMNOFCHARACTERSA, columnofcharactersb, "
DISPLAY "cOlUmNoFNUMERICss_0,"
DISPLAY "cOlUmNoFNUMERICss_1 INTO :aa, :bb, :cc, :dd FROM
- " CTS1.TESTA6439;"
* EXEC SQL SELECT COLUMNOFCHARACTERSA, columnofcharactersb,
* cOlUmNoFNUMERICss_0, cOlUmNoFNUMERICss_1
* INTO :aa, :bb, :cc, :dd FROM CTS1.TESTA6439;
CALL "SUB8" USING SQLCODE SQLSTATE aa bb cc dd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "COLUMNOFCHARACTERSA should be ABCD; its value is
- " ", aa
DISPLAY "columnofcharactersb should be DCBA; its value is
- " ", bb
DISPLAY "cOlUmNoFNUMERICss_0 should be 1; its value is
- " ", cc
DISPLAY "cOlUmNoFNUMERICss_1 should be 9999; its value is
- " ", dd
if (aa NOT = "ABCD" OR bb NOT = "DCBA" ) then
MOVE 0 TO flag
END-IF
if (cc NOT = 1 OR dd NOT = 9999) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*Ensure columns in the second table can be referenced correctly
DISPLAY "INSERT INTO CTS1.TESTB6439"
DISPLAY "VALUES('AA','BB',1,2);"
* EXEC SQL INSERT INTO CTS1.TESTB6439
* VALUES('AA','BB',1,2);
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO CTS1.TESTB6439"
DISPLAY "VALUES('CC','DD',3,4);"
* EXEC SQL INSERT INTO CTS1.TESTB6439
* VALUES('CC','DD',3,4);
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO CTS1.TESTB6439"
DISPLAY "VALUES('EE','FF',5,6);"
* EXEC SQL INSERT INTO CTS1.TESTB6439
* VALUES('EE','FF',5,6);
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO CTS1.TESTB6439"
DISPLAY "VALUES('GG','HH',7,8);"
* EXEC SQL INSERT INTO CTS1.TESTB6439
* VALUES('GG','HH',7,8);
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO CTS1.TESTB6439"
DISPLAY "VALUES('II','KK',9,0);"
* EXEC SQL INSERT INTO CTS1.TESTB6439
* VALUES('II','KK',9,0);
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Ensure the values stored in the second table can be retrieved c
DISPLAY "DECLARE a CURSOR"
DISPLAY "FOR SELECT * FROM CTS1.TESTB6439 ORDER BY
- " cOlUmNoFNUMERIC12345"
DISPLAY
"678901234567890123456789012345678901234567890
- "1234567890123"
DISPLAY
"456789012345678901234567890123456789012345678901_0;"
* EXEC SQL DECLARE a CURSOR
* FOR SELECT * FROM CTS1.TESTB6439
* ORDER BY
* cOlUmNoFNUMERIC123456789012345678901234567890
* 123456789012345678901234567890123456789012345
* 678901234567890123456789012345678901_0 END-EXEC
DISPLAY "OPEN a;"
* EXEC SQL OPEN a;
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Re-initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE "xxxxxxxxxx" TO bb
MOVE 99 TO cc
MOVE 99 TO dd
*Check first value fetched
DISPLAY "FETCH a INTO :aa, :bb, :cc, :dd;"
* EXEC SQL FETCH a INTO :aa, :bb, :cc, :dd;
CALL "SUB15" USING SQLCODE SQLSTATE aa bb cc dd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "COLUMNOFCHARACTERSA should be AA; its value is ",
aa
DISPLAY "columnofcharactersb should be BB; its value is ",
bb
DISPLAY "cOlUmNoFNUMERICss_0 should be 1; its value is ",
cc
DISPLAY "cOlUmNoFNUMERICss_1 should be 2; its value is ",
dd
if (aa NOT = "AA" OR bb NOT = "BB" ) then
MOVE 0 TO flag
END-IF
if (cc NOT = 1 OR dd NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*Re-initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE "xxxxxxxxxx" TO bb
MOVE 99 TO cc
MOVE 99 TO dd
*Check second value fetched
DISPLAY "FETCH a INTO :aa, :bb, :cc, :dd;"
* EXEC SQL FETCH a INTO :aa, :bb, :cc, :dd;
CALL "SUB16" USING SQLCODE SQLSTATE aa bb cc dd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "COLUMNOFCHARACTERSA should be CC; its value is ",
aa
DISPLAY "columnofcharactersb should be DD; its value is ",
bb
DISPLAY "cOlUmNoFNUMERICss_0 should be 3; its value is ",
cc
DISPLAY "cOlUmNoFNUMERICss_1 should be 4; its value is ",
dd
if (aa NOT = "CC" OR bb NOT = "DD" ) then
MOVE 0 TO flag
END-IF
if (cc NOT = 3 OR dd NOT = 4) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*Re-initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE "xxxxxxxxxx" TO bb
MOVE 99 TO cc
MOVE 99 TO dd
*Check third value fetched
DISPLAY "FETCH a INTO :aa, :bb, :cc, :dd;"
* EXEC SQL FETCH a INTO :aa, :bb, :cc, :dd;
CALL "SUB17" USING SQLCODE SQLSTATE aa bb cc dd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "COLUMNOFCHARACTERSA should be EE; its value is ",
aa
DISPLAY "columnofcharactersb should be FF; its value is ",
bb
DISPLAY "cOlUmNoFNUMERICss_0 should be 5; its value is ",
cc
DISPLAY "cOlUmNoFNUMERICss_1 should be 6; its value is ",
dd
if (aa NOT = "EE" OR bb NOT = "FF" ) then
MOVE 0 TO flag
END-IF
if (cc NOT = 5 OR dd NOT = 6) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*Re-initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE "xxxxxxxxxx" TO bb
MOVE 99 TO cc
MOVE 99 TO dd
*Check fourth value fetched
DISPLAY "FETCH a INTO :aa, :bb, :cc, :dd;"
* EXEC SQL FETCH a INTO :aa, :bb, :cc, :dd;
CALL "SUB18" USING SQLCODE SQLSTATE aa bb cc dd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "COLUMNOFCHARACTERSA should be GG; its value is ",
aa
DISPLAY "columnofcharactersb should be HH; its value is ",
bb
DISPLAY "cOlUmNoFNUMERICss_0 should be 7; its value is ",
cc
DISPLAY "cOlUmNoFNUMERICss_1 should be 8; its value is ",
dd
if (aa NOT = "GG" OR bb NOT = "HH" ) then
MOVE 0 TO flag
END-IF
if (cc NOT = 7 OR dd NOT = 8) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*Re-initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE "xxxxxxxxxx" TO bb
MOVE 99 TO cc
MOVE 99 TO dd
*Check fifth value fetched
DISPLAY "FETCH a INTO :aa, :bb, :cc, :dd;"
* EXEC SQL FETCH a INTO :aa, :bb, :cc, :dd;
CALL "SUB19" USING SQLCODE SQLSTATE aa bb cc dd
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "COLUMNOFCHARACTERSA should be II; its value is ",
aa
DISPLAY "columnofcharactersb should be KK; its value is ",
bb
DISPLAY "cOlUmNoFNUMERICss_0 should be 9; its value is ",
cc
DISPLAY "cOlUmNoFNUMERICss_1 should be 0; its value is ",
dd
if (aa NOT = "II" OR bb NOT = "KK" ) then
MOVE 0 TO flag
END-IF
if (cc NOT = 9 OR dd NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "CLOSE a;"
* EXEC SQL CLOSE a;
CALL "SUB20" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*check columns are referenced correctly in the information schem
DISPLAY "DECLARE b CURSOR"
DISPLAY "FOR SELECT COLUMN_NAME, ORDINAL_POSITION FROM "
DISPLAY "INFORMATION_SCHEMA.COLUMNS"
DISPLAY "WHERE TABLE_SCHEMA = 'CTS1' AND TABLE_NAME =
- " 'TESTB6439';"
* EXEC SQL DECLARE b CURSOR
* FOR SELECT COLUMN_NAME, ORDINAL_POSITION
* FROM INFORMATION_SCHEMA.COLUMNS
* WHERE TABLE_SCHEMA = 'CTS1' AND TABLE_NAME = 'TESTB6439'
* ORDER BY ORDINAL_POSITION END-EXEC
DISPLAY "OPEN b;"
* EXEC SQL OPEN b;
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Re-initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE 99 TO cc
DISPLAY "FETCH b INTO :aa, :cc;"
* EXEC SQL FETCH b INTO :aa, :cc;
CALL "SUB22" USING SQLCODE SQLSTATE aa cc
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "aa should be:"
DISPLAY
"COLUMNOFCHARACTERDATATYPE12345678901234567890
- "1234567890123456789"
DISPLAY
"012345678901234567890123456789012345678901234
- "5678901234567890123"
DISPLAY "its value is:"
PERFORM P50
DISPLAY " "
PERFORM P49
DISPLAY " "
DISPLAY "cc should be 1; its value is ", cc
if (aa NOT = str1 OR cc NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY " "
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE 99 TO cc
DISPLAY "FETCH b INTO :aa, :cc;"
* EXEC SQL FETCH b INTO :aa, :cc;
CALL "SUB23" USING SQLCODE SQLSTATE aa cc
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "aa should be:"
DISPLAY
"COLUMNOFCHARACTERDATATYPE12345678901234567890
- "1234567890123456789"
DISPLAY
"0123456789012345678901234567890123456789012345
- "67890123456789012B"
DISPLAY "its value is:"
PERFORM P48
DISPLAY " "
PERFORM P47
DISPLAY " "
DISPLAY "cc should be 2; its value is ", cc
if (aa NOT = str2 OR cc NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY " "
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE 99 TO cc
DISPLAY "FETCH b INTO :aa, :cc;"
* EXEC SQL FETCH b INTO :aa, :cc;
CALL "SUB24" USING SQLCODE SQLSTATE aa cc
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "aa should be:"
DISPLAY
"COLUMNOFNUMERIC123456789012345678901234567890
- "1234567890123456789"
DISPLAY
"0123456789012345678901234567890123456789012345
- "6789012345678901_0"
DISPLAY "its value is:"
PERFORM P46
DISPLAY " "
PERFORM P45
DISPLAY " "
DISPLAY "cc should be 3; its value is ", cc
if (aa NOT = str3 OR cc NOT = 3) then
MOVE 0 TO flag
END-IF
DISPLAY " "
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE 99 TO cc
DISPLAY "FETCH b INTO :aa, :cc;"
* EXEC SQL FETCH b INTO :aa, :cc;
CALL "SUB25" USING SQLCODE SQLSTATE aa cc
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "aa should be:"
DISPLAY
"COLUMNOFNUMERIC123456789012345678901234567890
- "1234567890123456789"
DISPLAY
"01234567890123456789012345678901234567890123456
- "789012345678901_1"
DISPLAY "its value is:"
PERFORM P44
DISPLAY " "
PERFORM P43
DISPLAY " "
DISPLAY "cc should be 4; its value is ", cc
if (aa NOT = str4 OR cc NOT = 4) then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "CLOSE b;"
* EXEC SQL CLOSE b;
CALL "SUB26" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB27" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Create third table
*dynamically create a table containing columns of length 19 and
*set up the long string for the host variable :sqlstm
MOVE "CREATE TABLE TESTC6439 (COLUMNOFCHARACTE
- "RSA CHAR(3), COLUMNOFCHARACTERDATATYPE12
- "345678901234567890123456789012345678901234567890
- "1234567890123456789012345678901234567890
- "1234567890123 CHAR(3))" TO sqlstm
DISPLAY "sqlstm = CREATE TABLE TESTC6439
- " (COLUMNOFCHARACTERSA CHAR(3),"
DISPLAY
"COLUMNOFCHARACTERDATATYPE12345678901234567890
- "1234567890123456789"
DISPLAY
"0123456789012345678901234567890123456789012345
- "678901234567890123"
DISPLAY " CHAR(3))"
DISPLAY "EXECUTE IMMEDIATE :sqlstm;"
* EXEC SQL EXECUTE IMMEDIATE :sqlstm;
CALL "SUB28" USING SQLCODE SQLSTATE sqlstm
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB29" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO CTS1.TESTC6439"
DISPLAY "VALUES('aaa','bbb');"
* EXEC SQL INSERT INTO CTS1.TESTC6439
* VALUES('aaa','bbb');
CALL "SUB30" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO CTS1.TESTC6439"
DISPLAY "VALUES('ccc','ddd);"
* EXEC SQL INSERT INTO CTS1.TESTC6439
* VALUES ('ccc','ddd');
CALL "SUB31" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO CTS1.TESTC6439"
DISPLAY "VALUES('eee','fff');"
* EXEC SQL INSERT INTO CTS1.TESTC6439
* VALUES('eee','fff');
CALL "SUB32" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*select values from dynamically created table
DISPLAY "DECLARE c CURSOR"
DISPLAY "FOR SELECT * FROM CTS1.TESTC6439 ORDER BY
- " COLUMNOFCHARACTERSA;"
* EXEC SQL DECLARE c CURSOR
* FOR SELECT * FROM CTS1.TESTC6439
* ORDER BY COLUMNOFCHARACTERSA END-EXEC
DISPLAY "OPEN c;"
* EXEC SQL OPEN c;
CALL "SUB33" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE "xxxxxxxxxx" TO bb
DISPLAY "FETCH c INTO :aa, :bb;"
* EXEC SQL FETCH c INTO :aa, :bb;
CALL "SUB34" USING SQLCODE SQLSTATE aa bb
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "aa should be aaa; its value is ", aa
DISPLAY "bb should be bbb; its value is ", bb
if (aa NOT = "aaa" OR bb NOT = "bbb") then
MOVE 0 TO flag
END-IF
DISPLAY " "
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE "xxxxxxxxxx" TO bb
DISPLAY "FETCH c INTO :aa, :bb;"
* EXEC SQL FETCH c INTO :aa, :bb;
CALL "SUB35" USING SQLCODE SQLSTATE aa bb
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "aa should be ccc; its value is ", aa
DISPLAY "bb should be ddd; its value is ", bb
if (aa NOT = "ccc" OR bb NOT = "ddd") then
MOVE 0 TO flag
END-IF
DISPLAY " "
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE "xxxxxxxxxx" TO bb
DISPLAY "FETCH c INTO :aa, :bb;"
* EXEC SQL FETCH c INTO :aa, :bb;
CALL "SUB36" USING SQLCODE SQLSTATE aa bb
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "aa should be eee; its value is ", aa
DISPLAY "bb should be fff; its value is ", bb
if (aa NOT = "eee" OR bb NOT = "fff") then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "CLOSE c;"
* EXEC SQL CLOSE c;
CALL "SUB37" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB38" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*ADD column to table TESTB6439
DISPLAY "ALTER TABLE CTS1.TESTB6439 ADD COLUMN
- " COLUMNOFCHARACTERDATATYPE"
DISPLAY
"1234567890123456789012345678901234567890
- "123456789012345678"
DISPLAY "90123456789012345678901234567890123456789012C
- " CHAR(3);"
* EXEC SQL ALTER TABLE CTS1.TESTB6439
* ADD COLUMN
* COLUMNOFCHARACTERDATATYPE12345678901234567890
* 123456789012345678901234567890123456789012345
* 6789012345678901234567890123456789012C CHAR(3)
* ;
CALL "SUB39" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB40" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*check values can be inserted into new column
DISPLAY "INSERT INTO CTS1.TESTB6439"
DISPLAY "VALUES('TTT','TTT',100,100,'ADD');"
* EXEC SQL INSERT INTO CTS1.TESTB6439
* VALUES('TTT','TTT',100,100,'ADD');
CALL "SUB41" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
TO aa
MOVE "xxxxxxxxxx" TO bb
MOVE 99 TO cc
MOVE 99 TO dd
MOVE "xxxxxxxxx" TO ee
*check values inserted correctly
DISPLAY "SELECT * INTO :aa, :bb, :cc, :dd, :ee FROM
- " CTS1.TESTB6439"
DISPLAY "WHERE
- " COLUMNOFCHARACTERDATATYPE123456789012345678901234567"
DISPLAY
"89012345678901234567890123456789012345678901234567
- "89012345"
DISPLAY "67890123456789012C = 'ADD';"
* EXEC SQL SELECT * INTO :aa, :bb, :cc, :dd, :ee FROM
* CTS1.TESTB6439
* WHERE
* COLUMNOFCHARACTERDATATYPE1234567890123456789012345
* 67890123456789012345678901234567890123456789012345
* 678901234567890123456789012C = 'ADD';
CALL "SUB42" USING SQLCODE SQLSTATE aa bb cc dd ee
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "aa should be TTT; its value is ", aa
DISPLAY "bb should be TTT; its value is ", bb
DISPLAY "cc should be 100; its value is ", cc
DISPLAY "dd should be 100; its value is ", dd
DISPLAY "ee should be ADD; its value is ", ee
if (aa NOT = "TTT" OR bb NOT = "TTT" ) then
MOVE 0 TO flag
END-IF
if (cc NOT = 100 OR dd NOT = 100 OR ee NOT =
"ADD") then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB43" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Now clean-up database
DISPLAY "DROP TABLE TESTA6439 CASCADE;"
* EXEC SQL DROP TABLE TESTA6439 CASCADE;
CALL "SUB44" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB45" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE TESTB6439 CASCADE;"
* EXEC SQL DROP TABLE TESTB6439 CASCADE;
CALL "SUB46" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB47" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE TESTC6439 CASCADE;"
* EXEC SQL DROP TABLE TESTC6439 CASCADE;
CALL "SUB48" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB49" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*now record results
if ( flag = 1 ) then
DISPLAY " xts729.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7029','pass','MCO');
CALL "SUB50" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " xts729.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7029','fail','MCO');
CALL "SUB51" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "========================================"
* EXEC SQL COMMIT WORK;
CALL "SUB52" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7029 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
P50.
DISPLAY aa
.
P49.
DISPLAY aa
.
P48.
DISPLAY aa
.
P47.
DISPLAY aa
.
P46.
DISPLAY aa
.
P45.
DISPLAY aa
.
P44.
DISPLAY aa
.
P43.
DISPLAY aa
.
[ Verzeichnis aufwärts0.72unsichere Verbindung
Übersetzung europäischer Sprachen durch Browser
]
|
