|
IDENTIFICATION DIVISION.
PROGRAM-ID. XTS724.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "XTS724.SCO") calling SQL
* procedures in file "XTS724.MCO".
*Copyright 1995 National Computing Centre Limited
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* XTS724.SCO
* WRITTEN BY: Nickos Backalidis
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* Access to COLUMN_DOMAIN_USAGE view
*
* REFERENCES
* 21.2.25 -- COLUMN_DOMAIN_USAGE view
* 11.21 -- <domain definition>
* 11.27 -- <drop domain statement>
* F#25 -- Domain definition
* F#2 -- Basic information schema
* F#3 -- Basic schema manipulation
* F#34 -- Usage tables
*
* DATE LAST ALTERED 14/12/95 CTS5 Hand-over Test
*
* Cleanups and fixes by V. Kogakis 04/12/95:
* Respect length of strings in variable initialization.
*
* QA Status: QA Check
*
* Revised by DWF 1/30/96
* Fixed SDL transactions
* Fixed SQL syntax errors
* Removed extraneous SQL syntax
* Removed status checks after cursor definition
* Upcased information schema identifiers
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 counok PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 domsch PIC X(128).
01 colnam PIC X(128).
01 tabnam PIC X(128).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 i PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS4 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Module COBOL, xts724.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7024 *******************
MOVE 1 TO flag
DISPLAY " TEST7024"
DISPLAY " Access to COLUMN_DOMAIN_USAGE view "
DISPLAY " References "
DISPLAY " 21.2.25 -- COLUMN_DOMAIN_USAGE view"
DISPLAY " 11.21 -- "
DISPLAY " 11.27 -- "
DISPLAY " F#25 -- Domain definition "
DISPLAY " F#2 -- Basic information schema "
DISPLAY " F#3 -- Basic schema manipulation "
DISPLAY " F#34 -- Usage tables "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
*initialise error reporting variables
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*initialise host variable
*we expect a zero so initialise it to a value <> 0
MOVE 9 TO counok
*Access the COLUMN_DOMAIN_USAGE view
DISPLAY "SELECT COUNT(*) INTO :counok"
DISPLAY "FROM INFORMATION_SCHEMA.COLUMN_DOMAIN_USAGE"
DISPLAY "WHERE DOMAIN_SCHEMA = 'CTS4';"
* EXEC SQL SELECT COUNT(*) INTO :counok
* FROM INFORMATION_SCHEMA.COLUMN_DOMAIN_USAGE
* WHERE DOMAIN_SCHEMA = 'CTS4';
CALL "SUB3" USING SQLCODE SQLSTATE counok
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "counok should be 0; its value is : ", counok
if (counok NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Now create a domain under the current schema
DISPLAY "CREATE DOMAIN TESTDOM AS NUMERIC(5)"
DISPLAY "CONSTRAINT CONSD724 CHECK (VALUE > 500);"
* EXEC SQL CREATE DOMAIN TESTDOM AS NUMERIC(5)
* CONSTRAINT CONSD724 CHECK (VALUE > 500);
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "CREATE TABLE TAB724a"
DISPLAY " (COLNUM1 TESTDOM,"
DISPLAY " COLNUM2 TESTDOM,"
DISPLAY " COLNUM3 TESTDOM,"
DISPLAY " COLNUM4 TESTDOM);"
* EXEC SQL CREATE TABLE TAB724a
* (COLNUM1 TESTDOM,
* COLNUM2 TESTDOM,
* COLNUM3 TESTDOM,
* COLNUM4 TESTDOM);
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Current contents of COLUMN_DOMAIN_USAGE:
*TESTDOM TAB724A.COLNUM1
*TESTDOM TAB724A.COLNUM2
*TESTDOM TAB724A.COLNUM3
*TESTDOM TAB724A.COLNUM4
*now access the COLUMN_DOMAIN_USAGE view and check that
*the columns of TAB724a are visible
DISPLAY "DECLARE ALPHA CURSOR FOR SELECT
- " DOMAIN_SCHEMA,COLUMN_NAME,"
DISPLAY "TABLE_NAME FROM
- " INFORMATION_SCHEMA.COLUMN_DOMAIN_USAGE"
DISPLAY "WHERE DOMAIN_NAME = 'TESTDOM'"
DISPLAY "ORDER BY COLUMN_NAME;"
* EXEC SQL DECLARE ALPHA CURSOR
* FOR SELECT DOMAIN_SCHEMA,COLUMN_NAME, TABLE_NAME
* FROM INFORMATION_SCHEMA.COLUMN_DOMAIN_USAGE
* WHERE DOMAIN_NAME = 'TESTDOM'
* ORDER BY COLUMN_NAME END-EXEC
DISPLAY "OPEN ALPHA;"
* EXEC SQL OPEN ALPHA;
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO colnam
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO tabnam
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO domsch
*four rows should be returned by the cursor
*fetch first row
DISPLAY "FETCH ALPHA INTO :domsch,:colnam,:tabnam;"
* EXEC SQL FETCH ALPHA INTO :domsch,:colnam,:tabnam;
CALL "SUB10" USING SQLCODE SQLSTATE domsch colnam tabnam
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "DOMAIN_SCHEMA should be CTS4; it is ", domsch
DISPLAY "COLUMN_NAME should be COLNUM1; it is ", colnam
DISPLAY "TABLE_NAME should be TAB724A; it is ", tabnam
if (domsch NOT = "CTS4" OR colnam NOT =
"COLNUM1") then
MOVE 0 TO flag
END-IF
if (tabnam NOT = "TAB724A") then
MOVE 0 TO flag
END-IF
DISPLAY " "
*re-initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO colnam
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO tabnam
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO domsch
*fetch the second row
DISPLAY "FETCH ALPHA INTO :domsch,:colnam,:tabnam;"
* EXEC SQL FETCH ALPHA INTO :domsch,:colnam,:tabnam;
CALL "SUB11" USING SQLCODE SQLSTATE domsch colnam tabnam
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "DOMAIN_SCHEMA should be CTS4; it is ", domsch
DISPLAY "COLUMN_NAME should be COLNUM2; it is ", colnam
DISPLAY "TABLE_NAME should be TAB724A; it is ", tabnam
if (domsch NOT = "CTS4" OR colnam NOT =
"COLNUM2") then
MOVE 0 TO flag
END-IF
if (tabnam NOT = "TAB724A") then
MOVE 0 TO flag
END-IF
DISPLAY " "
*re-initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO colnam
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO tabnam
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO domsch
*fetch third row
DISPLAY "FETCH ALPHA INTO :domsch,:colnam,:tabnam;"
* EXEC SQL FETCH ALPHA INTO :domsch,:colnam,:tabnam;
CALL "SUB12" USING SQLCODE SQLSTATE domsch colnam tabnam
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "DOMAIN_SCHEMA should be CTS4; it is ", domsch
DISPLAY "COLUMN_NAME should be COLNUM3; it is ", colnam
DISPLAY "TABLE_NAME should be TAB724A; it is ", tabnam
if (domsch NOT = "CTS4" OR colnam NOT =
"COLNUM3") then
MOVE 0 TO flag
END-IF
if (tabnam NOT = "TAB724A") then
MOVE 0 TO flag
END-IF
DISPLAY " "
*re-initialise host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO colnam
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO tabnam
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO domsch
*fetch fourth and final row
DISPLAY "FETCH ALPHA INTO :domsch,:colnam,:tabnam;"
* EXEC SQL FETCH ALPHA INTO :domsch,:colnam,:tabnam;
CALL "SUB13" USING SQLCODE SQLSTATE domsch colnam tabnam
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "DOMAIN_SCHEMA should be CTS4; it is ", domsch
DISPLAY "COLUMN_NAME should be COLNUM4; it is ", colnam
DISPLAY "TABLE_NAME should be TAB724A; it is ", tabnam
if (domsch NOT = "CTS4" OR colnam NOT =
"COLNUM4") then
MOVE 0 TO flag
END-IF
if (tabnam NOT = "TAB724A") then
MOVE 0 TO flag
END-IF
DISPLAY " "
*close the cursor
DISPLAY "CLOSE ALPHA;"
* EXEC SQL CLOSE ALPHA;
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB15" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*now drop the created domain
DISPLAY "DROP DOMAIN TESTDOM CASCADE;"
* EXEC SQL DROP DOMAIN TESTDOM CASCADE;
CALL "SUB16" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*now drop the created table
DISPLAY "DROP TABLE TAB724a CASCADE;"
* EXEC SQL DROP TABLE TAB724a CASCADE;
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB19" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Now access the COLUMN_DOMAIN_USAGE_VIEW
*and check that there exist no references
*to the above <schema elements>
*First initialise host variable
*we expect a zero so initialise it to a value <> 0
MOVE 9 TO counok
DISPLAY "SELECT COUNT(*) INTO :counok"
DISPLAY " FROM INFORMATION_SCHEMA.COLUMN_DOMAIN_USAGE"
DISPLAY " WHERE DOMAIN_SCHEMA = 'CTS4';"
* EXEC SQL SELECT COUNT(*) INTO :counok
* FROM INFORMATION_SCHEMA.COLUMN_DOMAIN_USAGE
* WHERE DOMAIN_SCHEMA = 'CTS4';
CALL "SUB20" USING SQLCODE SQLSTATE counok
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "counok should be 0; its value is : ", counok
if (counok NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY " "
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*record results
if ( flag = 1 ) then
DISPLAY " xts724.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7024','pass','MCO');
CALL "SUB22" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " xts724.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7024','fail','MCO');
CALL "SUB23" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "========================================"
* EXEC SQL COMMIT WORK;
CALL "SUB24" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7024 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.106 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
