|
IDENTIFICATION DIVISION.
PROGRAM-ID. CDR004.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "CDR004.SCO") calling SQL
* procedures in file "CDR004.MCO"
****************************************************************
*
* COMMENT SECTION
*
* DATE 1989/04/07 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* CDR004.SCO
* WRITTEN BY: SUN DAJUN
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* THIS ROUTINE TESTS THE <CHECK> CONSTRAINT.
*
* REFERENCES
* AMERICAN NATIONAL STANDARD database language - SQL
* with Integrity Enhancement
*
* SECTION 6.8
* <check constraint definition>::=
* CHECK (<search condition>)
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 count2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQLCODE PIC S9(9) COMP.
01 errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 code1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 code2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* date_time declaration *
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
PROCEDURE DIVISION.
P0.
MOVE "SUN" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
CALL "AUTHCK" USING SQLCODE uidx
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User " uid " expected."
DISPLAY "User " uidx " connected."
DISPLAY " "
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, cdr004.sco"
DISPLAY " "
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
DISPLAY " "
* date_time print *
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0309 ******************
*This procedure tests CHECK specification on two
*columns with AND.
* CHECK condition
* GRADE NOT IN (5,22) AND EMPNAME LIKE 'T%'
DISPLAY " TEST0309 "
DISPLAY " CHECK CONSTRAINTS "
DISPLAY " SQL with Integrity Enhancement section 6.8"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " INSERT INTO STAFF11"
DISPLAY " VALUES('E1','Thomas',0,'Deale');"
DISPLAY "code1 = SQLCODE;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF11"
DISPLAY " VALUES('E2','Dom',22,'Newyork');"
DISPLAY "code2 = SQLCODE;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF11"
DISPLAY " VALUES('E3','Susan',11,'Hawaii');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM STAFF11;"
* EXEC SQL DELETE FROM STAFF11;
CALL "SUB1" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF11
* VALUES('E1','Thomas',0,'Deale') END-EXEC
CALL "SUB2" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL INSERT INTO STAFF11
* VALUES('E2','Tom',22,'Newyork') END-EXEC
CALL "SUB3" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code2
* EXEC SQL INSERT INTO STAFF11
* VALUES('E3','Susan',11,'Hawaii') END-EXEC
CALL "SUB4" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM STAFF11 END-EXEC
CALL "SUB5" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is:"
DISPLAY " code1 < 0,code2 < 0,count1 = 1."
DISPLAY " Your answer is:"
DISPLAY " code1 = ", code1 ",code2 = ", code2
DISPLAY ",count1= ", count1
if (code1 NOT = 0 AND count1 = 1 ) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0309','pass','MCO') END-EXEC
CALL "SUB6" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0309','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB7" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr004.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB8" USING SQLCODE
MOVE SQLCODE TO SQL-COD
****************** END TEST0309 *****************************
******************** BEGIN TEST0310 ******************
*This procedure tests if x NOT IN and NOT x IN of the
*CHECK specification has the same meaning .
* CHECK condition
* NOT GRADE IN (5,22) on STAFF12
DISPLAY " TEST0310 "
DISPLAY " CHECK CONSTRAINTS "
DISPLAY " SQL with Integrity Enhancement section 6.8"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " INSERT INTO STAFF12"
DISPLAY " VALUES('E1','Thomas',0,'Deale');"
DISPLAY "code1 = SQLCODE;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF12"
DISPLAY " VALUES('E2','Dom',22,'Newyork');"
DISPLAY "code2 = SQLCODE;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF12"
DISPLAY " VALUES('E3','Susan',11,'Hawaii');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM STAFF12;"
* EXEC SQL DELETE FROM STAFF12;
CALL "SUB9" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF12
* VALUES('E1','Thomas',0,'Deale') END-EXEC
CALL "SUB10" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL INSERT INTO STAFF12
* VALUES('E2','Tom',22,'Newyork') END-EXEC
CALL "SUB11" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code2
* EXEC SQL INSERT INTO STAFF12
* VALUES('E3','Susan',11,'Hawaii') END-EXEC
CALL "SUB12" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM STAFF12 END-EXEC
CALL "SUB13" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is:"
DISPLAY " code1 < 0,code2 < 0,count1 = 1."
DISPLAY " Your answer is:"
DISPLAY " code1 = ", code1 ",code2 = ", code2
DISPLAY ",count1= ", count1
if (code1 NOT = 0 AND count1 = 1 ) then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0310','pass','MCO') END-EXEC
CALL "SUB14" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0310','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB15" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr004.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB16" USING SQLCODE
MOVE SQLCODE TO SQL-COD
****************** END TEST0310 *****************************
******************** BEGIN TEST0311 *******************
*This test check the constraint NOT NULL in column
*definition constraint.
* CHECK condition
* NOT NULL in EMPNAME def. of STAFF15
* INSERT NULL INTO EMPNAME explicitly
DISPLAY " TEST0311 "
DISPLAY " CHECK CONSTRAINT "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " INSERT INTO STAFF15"
DISPLAY " VALUES('E1','Alice',52,'Deale');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count1"
DISPLAY " FROM STAFF15;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF15"
DISPLAY " VALUES('E1',NULL,52,'Newyork');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO:count2"
DISPLAY " FROM STAFF15;"
MOVE 0 TO count1
MOVE 0 TO count2
* EXEC SQL DELETE FROM STAFF15;
CALL "SUB17" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF15
* VALUES('E1','Alice',52,'Deale') END-EXEC
CALL "SUB18" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM STAFF15 END-EXEC
CALL "SUB19" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF15
* VALUES('E2',NULL,52,'Newyork') END-EXEC
CALL "SUB20" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO :count2
* FROM STAFF15 END-EXEC
CALL "SUB21" USING SQLCODE count2
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " SQLCODE of second INSERT not equal to 0."
DISPLAY " count1 is 1"
DISPLAY " count2 is 1"
DISPLAY " Your answer is :"
DISPLAY " SQLCOD of second INSERT is ", code1
DISPLAY " count1 is ", count1
DISPLAY " count2 is ", count2
if (code1 NOT = 0 AND count1 = 1 AND count2 = 1)
then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0311','pass','MCO') END-EXEC
CALL "SUB22" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0311','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB23" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr004.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB24" USING SQLCODE
MOVE SQLCODE TO SQL-COD
**************** END TEST 0311 **********
******************** BEGIN TEST0312 *******************
*This test checks NOT NULL in table definition con-
*straint.
* CHECK condition
* EMPNAME IS NOT NULL. on STAFF15
* INSERT VALUE INTO all columns except EMPNAME
DISPLAY " TEST0312 "
DISPLAY " CHECK CONSTRAINT "
DISPLAY " SQL with Integrity Enhancement section
- " 6.5,6.6"
DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
DISPLAY " "
DISPLAY " INSERT INTO STAFF15"
DISPLAY " VALUES('E1','Alice',52,'Deale');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count1"
DISPLAY " FROM STAFF15;"
DISPLAY " "
DISPLAY " INSERT INTO STAFF15(EMPNUM,GRADE,CITY)"
DISPLAY " VALUES('E1',52,'Newyork');"
DISPLAY " "
DISPLAY " SELECT COUNT(*) INTO :count2"
DISPLAY " FROM STAFF15;"
COMPUTE count1 = -1
COMPUTE count2 = -1
* EXEC SQL DELETE FROM STAFF15;
CALL "SUB25" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF15
* VALUES('E1','Alice',52,'Deale') END-EXEC
CALL "SUB26" USING SQLCODE
MOVE SQLCODE TO SQL-COD
* EXEC SQL SELECT COUNT(*) INTO :count1
* FROM STAFF15 END-EXEC
CALL "SUB27" USING SQLCODE count1
MOVE SQLCODE TO SQL-COD
* EXEC SQL INSERT INTO STAFF15(EMPNUM,GRADE,CITY)
* VALUES('E2',52,'Newyork') END-EXEC
CALL "SUB28" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO code1
* EXEC SQL SELECT COUNT(*) INTO :count2
* FROM STAFF15 END-EXEC
CALL "SUB29" USING SQLCODE count2
MOVE SQLCODE TO SQL-COD
DISPLAY " The correct answer is :"
DISPLAY " SQLCODE of second INSERT not equal to 0."
DISPLAY " count1 is 1"
DISPLAY " count2 is 1"
DISPLAY " Your answer is :"
DISPLAY " SQLCOD of second INSERT is ", code1
DISPLAY " count1 is ", count1
DISPLAY " count2 is ", count2
if (code1 NOT = 0 AND count1 = 1 AND count2 = 1)
then
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0312','pass','MCO') END-EXEC
CALL "SUB30" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " *** pass *** "
else
* EXEC SQL INSERT INTO TESTREPORT
* VALUES('0312','fail','MCO') END-EXEC
ADD 1 TO errcnt
CALL "SUB31" USING SQLCODE
MOVE SQLCODE TO SQL-COD
DISPLAY " cdr004.sco *** fail *** "
END-IF
DISPLAY "================================================"
DISPLAY " "
* EXEC SQL COMMIT WORK;
CALL "SUB32" USING SQLCODE
MOVE SQLCODE TO SQL-COD
**************** END TEST 0312 **********
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
[ zur Elbe Produktseite wechseln0.4Quellennavigators
Analyse erneut starten
]
|
