|
IDENTIFICATION DIVISION.
PROGRAM-ID. XTS770.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "XTS770.SCO") calling SQL
* procedures in file "XTS770.MCO".
*Copyright 1995 National Computing Centre Limited
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* XTS770.SCO TEST7070
* WRITTEN BY: Nickos Backalidis
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
*<Character set specification> of SQL_CHARACTER in an
* <identifier>
*
* REFERENCES
* 10.4 -- <Character set specification>
* 5.4 -- <Names and identifiers>
* 5.4 SR.2a
* F#3 -- Basic schema manipulation
* F#46 -- Named character sets
*
* DATE LAST ALTERED 18/12/95 CTS5 Hand-over Test
*
* Cleanups and fixes by V. Kogakis 18/12/95
* Print timestamp
* Include Files
* Define NOSUBCLASS/CHCKOK at test beginning
*
* QA STATUS : QA CHECK
*
* Revised by DWF 1996-02-26
* Added FIPS notice
* Fixed variable declaration
* Fixed string lengths
* Fixed SQL syntax errors
* Removed status checks after cursor definitions
* Removed field widths from printfs
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 cnum1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 cstr1 PIC X(10).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS3 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Module COBOL, xts770.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7070 *******************
MOVE 1 TO flag
DISPLAY " FIPS TEST7070"
DISPLAY " of SQL_CHARACTER
- " in an "
DISPLAY " References:"
DISPLAY " 10.4 -- "
DISPLAY " 5.4 -- "
DISPLAY " 5.4 SR.2a "
DISPLAY " F#3 -- Basic schema manipulation"
DISPLAY " F#46 -- Named character sets "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "Support for LATIN1 is only required by FIPS
- " 127-2,"
DISPLAY "not by SQL-92."
*Initialise error reporting variables
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*create a table under the current schema TAB770
DISPLAY "CREATE TABLE TAB770"
DISPLAY " (COLNUM1 NUMERIC(5),"
DISPLAY " COLSTR1 CHAR(10) CHARACTER SET
- " SQL_CHARACTER);"
* EXEC SQL CREATE TABLE TAB770
* (COLNUM1 NUMERIC(5),
* COLSTR1 CHAR(10) CHARACTER SET SQL_CHARACTER);
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*insert three rows in the table
DISPLAY "INSERT INTO TAB770 VALUES(10, _SQL_CHARACTER
- " 'BARBIE');"
* EXEC SQL INSERT INTO TAB770 VALUES(10, _SQL_CHARACTER
* 'BARBIE');
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO TAB770 VALUES(30, _SQL_CHARACTER
- " 'KILLER');"
* EXEC SQL INSERT INTO TAB770 VALUES(30, _SQL_CHARACTER
* 'KILLER');
CALL "SUB6" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO TAB770 VALUES(20, _SQL_CHARACTER '205
- " GTi');"
* EXEC SQL INSERT INTO TAB770 VALUES(20, _SQL_CHARACTER '205
* GTi');
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE F CURSOR"
DISPLAY "FOR SELECT COLNUM1,COLSTR1"
DISPLAY "FROM TAB770"
DISPLAY "ORDER BY COLNUM1;"
* EXEC SQL DECLARE F CURSOR
* FOR SELECT COLNUM1,COLSTR1
* FROM TAB770
* ORDER BY COLNUM1 END-EXEC
DISPLAY "OPEN F;"
* EXEC SQL OPEN F;
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*fetch the rows that satisfy the <search condition> - three in t
*initialise host variables
MOVE 0 TO cnum1
MOVE "xxxxxxxxx" TO cstr1
*fetch first row
DISPLAY "FETCH F INTO :cnum1,:cstr1;"
* EXEC SQL FETCH F INTO :cnum1,:cstr1;
CALL "SUB9" USING SQLCODE SQLSTATE cnum1 cstr1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "COLNUM1 should be 10; its value is ", cnum1
DISPLAY "COLSTR1 should be BARBIE; its value is ", cstr1
if (cstr1 NOT = "BARBIE" OR cnum1 NOT = 10) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*initialise host variables
MOVE 0 TO cnum1
MOVE "xxxxxxxxx" TO cstr1
*fetch second row
DISPLAY "FETCH F INTO :cnum1,:cstr1;"
* EXEC SQL FETCH F INTO :cnum1,:cstr1;
CALL "SUB10" USING SQLCODE SQLSTATE cnum1 cstr1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "COLNUM1 should be 20; its value is ", cnum1
DISPLAY "COLSTR1 should be 205 GTi; its value is ", cstr1
if (cstr1 NOT = "205 GTi" OR cnum1 NOT = 20) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*initialise host variables
MOVE 0 TO cnum1
MOVE "xxxxxxxxx" TO cstr1
*fetch third and final row
DISPLAY "FETCH F INTO :cnum1,:cstr1;"
* EXEC SQL FETCH F INTO :cnum1,:cstr1;
CALL "SUB11" USING SQLCODE SQLSTATE cnum1 cstr1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "COLNUM1 should be 30; its value is ", cnum1
DISPLAY "COLSTR1 should be KILLER; its value is ", cstr1
if (cstr1 NOT = "KILLER" OR cnum1 NOT = 30) then
MOVE 0 TO flag
END-IF
DISPLAY " "
*close the cursor
DISPLAY "CLOSE F;"
* EXEC SQL CLOSE F;
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE TAB770 CASCADE;"
* EXEC SQL DROP TABLE TAB770 CASCADE;
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB15" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*record results
if ( flag = 1 ) then
DISPLAY " xts770.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7070','pass','MCO');
CALL "SUB16" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " xts770.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7070','fail','MCO');
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "========================================"
* EXEC SQL COMMIT WORK;
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7070 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.37 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
