|
IDENTIFICATION DIVISION.
PROGRAM-ID. YTS751.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "YTS751.SCO") calling SQL
* procedures in file "YTS751.MCO".
*Copyright 1996 National Computing Centre Limited,
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* YTS751.SCO
* WRITTEN BY: Susan Watters
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* CREATE DOMAIN as SQL procedure statement with default
*
*
* REFERENCES
* 11.21 SR.1
* 11.21 GR.3
* 11.5 <default clause>
* 21.2.5 DOMAINS view
* F#25 Domain definition
* F#3 Basic schema manipulation
* F#2 Basic information schema
*
* DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
*
* QA Status: Full FC
*
* Revised by DWF 1996-02-29
* Removed EXEC SQL from inside printfs
* Initialized vars that are checked and printed
* Stopped initializing vars that aren't
* Renamed indicators
* Tightened pass criteria
* Improved feedback
* Added rollback after authid
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 co PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 domcat PIC X(128).
01 dtype PIC X(29).
01 cnum PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 olen PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 colcat PIC X(128).
01 colnam PIC X(128).
01 colsch PIC X(128).
01 chrset PIC X(128).
01 chrsch PIC X(128).
01 chrnme PIC X(128).
01 numpre PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 numrad PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 numscl PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 domdef PIC X(10).
01 dttime PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic3 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic4 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic5 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic6 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic7 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic8 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indic9 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indica PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indicb PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 indicc PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
* EXEC SQL END DECLARE SECTION END-EXEC
01 i PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Module COBOL, yts751.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7501 *******************
MOVE 1 TO flag
DISPLAY " TEST7501 "
DISPLAY " CREATE DOMAIN as SQL proc statement with
- " default"
DISPLAY "References:"
DISPLAY " 11.21 SR.1"
DISPLAY " 11.21 GR.3"
DISPLAY " 11.5 "
DISPLAY " 21.2.5 DOMAINS view"
DISPLAY " F#25 Domain definition"
DISPLAY " F#3 Basic schema manipulation"
DISPLAY " F#2 Basic information schema"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
*initialise all host variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO dtype
MOVE 99 TO cnum
MOVE 99 TO olen
MOVE "jjjjjjjjjj" TO domdef
MOVE 99 TO indic1
MOVE 99 TO indic2
MOVE 99 TO indic3
MOVE 99 TO indic4
MOVE 99 TO indic5
MOVE 99 TO indic6
MOVE 99 TO indic7
MOVE 99 TO indic8
MOVE 99 TO indic9
MOVE 99 TO indica
MOVE 99 TO indicb
MOVE 99 TO indicc
*create domain chardomain
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "CREATE DOMAIN chardomain"
DISPLAY "AS CHAR(10) DEFAULT 'MANCHESTER';"
* EXEC SQL CREATE DOMAIN chardomain
* AS CHAR(10) DEFAULT 'MANCHESTER';
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*Ensure chardomain is referenced in DOMAINS view
MOVE 0 TO co
DISPLAY "SELECT COUNT(*) INTO :co FROM
- " INFORMATION_SCHEMA.DOMAINS"
DISPLAY "WHERE DOMAIN_NAME = 'CHARDOMAIN'"
DISPLAY "AND DOMAIN_SCHEMA = 'CTS1'"
* EXEC SQL SELECT COUNT(*) INTO :co
* FROM INFORMATION_SCHEMA.DOMAINS
* WHERE DOMAIN_NAME = 'CHARDOMAIN'
* AND DOMAIN_SCHEMA = 'CTS1';
CALL "SUB5" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "Count should equal 1, count is ", co
if (co NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY " "
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "SELECT DOMAIN_CATALOG,"
DISPLAY " DATA_TYPE, CHARACTER_MAXIMUM_LENGTH,"
DISPLAY " CHARACTER_OCTET_LENGTH,
- " COLLATION_CATALOG,"
DISPLAY " COLLATION_SCHEMA, COLLATION_NAME,"
DISPLAY " CHARACTER_SET_CATALOG,
- " CHARACTER_SET_SCHEMA,"
DISPLAY " CHARACTER_SET_NAME, NUMERIC_PRECISION,"
DISPLAY " NUMERIC_PRECISION_RADIX, NUMERIC_SCALE,"
DISPLAY " DATETIME_PRECISION, DOMAIN_DEFAULT"
DISPLAY " INTO :domcat:indic1,"
DISPLAY " :dtype, :cnum, :olen:indic2,"
DISPLAY " :colcat:indic3, :colsch:indic4,
- " :colnam:indic5,"
DISPLAY " :chrset:indic6, :chrsch:indic7,
- " :chrnme:indic8,"
DISPLAY " :numpre:indic9, :numrad:indica,"
DISPLAY " :numscl:indicb, :dttime:indicc,"
DISPLAY " :domdef"
DISPLAY " FROM INFORMATION_SCHEMA.DOMAINS"
DISPLAY " WHERE DOMAIN_NAME = 'CHARDOMAIN'"
DISPLAY " AND DOMAIN_SCHEMA = 'CTS1';"
* EXEC SQL SELECT DOMAIN_CATALOG,
* DATA_TYPE, CHARACTER_MAXIMUM_LENGTH,
* CHARACTER_OCTET_LENGTH, COLLATION_CATALOG,
* COLLATION_SCHEMA, COLLATION_NAME,
* CHARACTER_SET_CATALOG, CHARACTER_SET_SCHEMA,
* CHARACTER_SET_NAME, NUMERIC_PRECISION,
* NUMERIC_PRECISION_RADIX, NUMERIC_SCALE,
* DATETIME_PRECISION, DOMAIN_DEFAULT
* INTO :domcat:indic1,
* :dtype, :cnum, :olen:indic2,
* :colcat:indic3, :colsch:indic4, :colnam:indic5,
* :chrset:indic6, :chrsch:indic7, :chrnme:indic8,
* :numpre:indic9, :numrad:indica,
* :numscl:indicb, :dttime:indicc,
* :domdef
* FROM INFORMATION_SCHEMA.DOMAINS
* WHERE DOMAIN_NAME = 'CHARDOMAIN'
* AND DOMAIN_SCHEMA = 'CTS1';
CALL "SUB6" USING SQLCODE SQLSTATE domcat indic1 dtype cnum
olen indic2 colcat indic3 colsch indic4 colnam indic5
chrset indic6 chrsch indic7 chrnme indic8 numpre indic9
numrad indica numscl indicb dttime indicc domdef
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "indic1 should be 0; its value is ", indic1
if (indic1 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "dtype should be CHARACTER; its value is ", dtype
if (dtype NOT = "CHARACTER " ) then
MOVE 0 TO flag
END-IF
DISPLAY "cnum should be 10; its value is ", cnum
if (cnum NOT = 10) then
MOVE 0 TO flag
END-IF
DISPLAY "domdef should be MANCHESTER; its value is ",
domdef
if (domdef NOT = "MANCHESTER") then
MOVE 0 TO flag
END-IF
DISPLAY "indic2 should be 0; its value is ", indic2
if (indic2 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "indic3 should be 0; its value is ", indic3
if (indic3 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "indic4 should be 0; its value is ", indic4
if (indic4 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "indic5 should be 0; its value is ", indic5
if (indic5 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "indic6 should be 0; its value is ", indic6
if (indic6 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "indic7 should be 0; its value is ", indic7
if (indic7 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "indic8 should be 0; its value is ", indic8
if (indic8 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "indic9 should be -1; its value is ", indic9
if (indic9 NOT = -1) then
MOVE 0 TO flag
END-IF
DISPLAY "indica should be -1; its value is ", indica
if (indica NOT = -1) then
MOVE 0 TO flag
END-IF
DISPLAY "indicb should be -1; its value is ", indicb
if (indicb NOT = -1) then
MOVE 0 TO flag
END-IF
DISPLAY "indicc should be -1; its value is ", indicc
if (indicc NOT = -1) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP DOMAIN chardomain CASCADE;"
* EXEC SQL DROP DOMAIN chardomain CASCADE;
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts751.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7501','pass','MCO');
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts751.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7501','fail','MCO');
CALL "SUB11" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7501 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.28 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
