|
IDENTIFICATION DIVISION.
PROGRAM-ID. SDL030.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "SDL030.SCO") calling SQL
* procedures in file "SDL030.MCO".
* STANDARD COBOL (file "SDL030.SCO")
****************************************************************
*
* COMMENT SECTION
*
* DATE 1992/06/11 STANDARD COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* SDL030.SCO
* WRITTEN BY: DAVID W. FLATER
*
* THIS ROUTINE TESTS THE SCHEMA DEFINITION LANGUAGE FOR SQL.
*
* REFERENCES
* ANSI SQL-1992
* 11.36 <grant statement>
*
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 tmpint PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
01 tmpcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
* EXEC SQL END DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 ii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "SCHANZLE" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
CALL "SUB1" USING SQLCODE uidx
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid " expected. User ", uidx "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Standard COBOL, sdl030.
- "pco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0464 *******************
MOVE 1 TO flag
DISPLAY " TEST0464 "
DISPLAY " Priv.violation: GRANT only SELECT to PUBLIC"
DISPLAY "Reference ANSI SQL-1992 11.36 "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE tmpint = -99
DISPLAY "SELECT INTTEST INTO :tmpint FROM CUGINI.EE;"
* EXEC SQL SELECT INTTEST
* INTO :tmpint FROM CUGINI.EE;
CALL "SUB2" USING SQLCODE tmpint
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be 0; its value is ", ii
DISPLAY "tmpint should be 0; its value is ", tmpint
if (ii NOT = 0 OR tmpint NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "INSERT INTO CUGINI.EE VALUES (9);"
* EXEC SQL INSERT INTO CUGINI.EE
* VALUES (9);
CALL "SUB3" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be < 0; its value is ", ii
if (ii NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SELECT COUNT(*) FROM CUGINI.EE;"
COMPUTE tmpcnt = -1
* EXEC SQL SELECT COUNT(*) INTO :tmpcnt
* FROM CUGINI.EE;
CALL "SUB4" USING SQLCODE tmpcnt
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be 0; its value is ", ii
DISPLAY "COUNT should be 1; its value is ", tmpcnt
if (ii NOT = 0 OR tmpcnt NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "UPDATE CUGINI.EE"
DISPLAY " SET INTTEST = 1;"
* EXEC SQL UPDATE CUGINI.EE
* SET INTTEST = 1;
CALL "SUB5" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be < 0; its value is ", ii
if (ii NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SELECT COUNT(*) FROM CUGINI.EE WHERE INTTEST = 1;"
COMPUTE tmpcnt = -1
* EXEC SQL SELECT COUNT(*) INTO :tmpcnt
* FROM CUGINI.EE WHERE INTTEST = 1;
CALL "SUB6" USING SQLCODE tmpcnt
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be 0; its value is ", ii
DISPLAY "COUNT should be 0; its value is ", tmpcnt
if (ii NOT = 0 OR tmpcnt NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "DELETE FROM CUGINI.EE;"
* EXEC SQL DELETE FROM CUGINI.EE;
CALL "SUB7" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be < 0; its value is ", ii
if (ii NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SELECT COUNT(*) FROM CUGINI.EE;"
COMPUTE tmpcnt = -1
* EXEC SQL SELECT COUNT(*) INTO :tmpcnt FROM CUGINI.EE
* ;
CALL "SUB8" USING SQLCODE tmpcnt
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be 0; its value is ", ii
DISPLAY "COUNT should be 1; its value is ", tmpcnt
if (ii NOT = 0 OR tmpcnt NOT = 1) then
MOVE 0 TO flag
END-IF
* EXEC SQL ROLLBACK WORK;
CALL "SUB9" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0464','pass','MCO');
CALL "SUB10" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " sdl030.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0464','fail','MCO');
CALL "SUB11" USING SQLCODE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB12" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0464 ********************
******************** BEGIN TEST0465 *******************
MOVE 1 TO flag
DISPLAY " TEST0465 "
DISPLAY " Priv.violation: GRANT only INSERT to PUBLIC"
DISPLAY "Reference ANSI SQL-1992 11.36 "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "INSERT INTO CUGINI.FF VALUES (-99);"
* EXEC SQL INSERT INTO CUGINI.FF
* VALUES (-99);
CALL "SUB13" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be = 0; its value is ", ii
if (ii NOT = 0) then
MOVE 0 TO flag
END-IF
MOVE 0 TO tmpint
DISPLAY "SELECT INTTEST INTO :tmpint FROM CUGINI.FF;"
* EXEC SQL SELECT INTTEST INTO :tmpint FROM CUGINI.FF
* ;
CALL "SUB14" USING SQLCODE tmpint
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be < 0; its value is ", ii
DISPLAY "tmpint should NOT be -99; its value is ", tmpint
if (ii NOT < 0 OR tmpint = -99) then
MOVE 0 TO flag
END-IF
DISPLAY "UPDATE CUGINI.FF SET INTTEST = 1;"
* EXEC SQL UPDATE CUGINI.FF
* SET INTTEST = 1;
CALL "SUB15" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be < 0; its value is ", ii
if (ii NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "DELETE FROM CUGINI.FF;"
* EXEC SQL DELETE FROM CUGINI.FF;
CALL "SUB16" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be < 0; its value is ", ii
if (ii NOT < 0) then
MOVE 0 TO flag
END-IF
* EXEC SQL ROLLBACK WORK;
CALL "SUB17" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0465','pass','MCO');
CALL "SUB18" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " sdl030.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0465','fail','MCO');
CALL "SUB19" USING SQLCODE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB20" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0465 ********************
******************** BEGIN TEST0466 *******************
MOVE 1 TO flag
DISPLAY " TEST0466 "
DISPLAY " Priv.violation: GRANT only UPDATE to PUBLIC"
DISPLAY "Reference ANSI SQL-1992 11.36 "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "UPDATE CUGINI.GG"
DISPLAY " SET C1 = 3;"
* EXEC SQL UPDATE CUGINI.GG
* SET C1 = 3;
CALL "SUB21" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be = 0; its value is ", ii
if (ii NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SELECT C1 INTO :tmpint FROM CUGINI.GG;"
COMPUTE tmpint = -1
* EXEC SQL SELECT C1
* INTO :tmpint FROM CUGINI.GG;
CALL "SUB22" USING SQLCODE tmpint
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be < 0; its value is ", ii
DISPLAY "tmpint should NOT be 1 or 3; its value is ",
tmpint
if (ii NOT < 0 OR tmpint = 1 OR tmpint = 3) then
MOVE 0 TO flag
END-IF
DISPLAY "INSERT INTO CUGINI.GG VALUES (-99);"
* EXEC SQL INSERT INTO CUGINI.GG
* VALUES (-99);
CALL "SUB23" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be < 0; its value is ", ii
if (ii NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "DELETE FROM CUGINI.GG;"
* EXEC SQL DELETE FROM CUGINI.GG;
CALL "SUB24" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be < 0; its value is ", ii
if (ii NOT < 0) then
MOVE 0 TO flag
END-IF
* EXEC SQL ROLLBACK WORK;
CALL "SUB25" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0466','pass','MCO');
CALL "SUB26" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " sdl030.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0466','fail','MCO');
CALL "SUB27" USING SQLCODE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB28" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0466 ********************
******************** BEGIN TEST0467 *******************
MOVE 1 TO flag
DISPLAY " TEST0467 "
DISPLAY " Priv.violation: GRANT only DELETE to PUBLIC"
DISPLAY "Reference ANSI SQL-1992 11.36 "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "DELETE FROM CUGINI.HH;"
* EXEC SQL DELETE FROM CUGINI.HH;
CALL "SUB29" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be = 0; its value is ", ii
if (ii NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "INSERT INTO CUGINI.HH VALUES (99);"
* EXEC SQL INSERT INTO CUGINI.HH
* VALUES (99);
CALL "SUB30" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be < 0; its value is ", ii
if (ii NOT < 0) then
MOVE 0 TO flag
END-IF
COMPUTE tmpint = -1
DISPLAY "SELECT SMALLTEST INTO :tmpint FROM CUGINI.HH;"
* EXEC SQL SELECT SMALLTEST INTO :tmpint FROM CUGINI.HH
* ;
CALL "SUB31" USING SQLCODE tmpint
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be < 0; its value is ", ii
DISPLAY "tmpint should NOT be 2 or 99; its value is ",
tmpint
if (ii NOT < 0 OR tmpint = 2 OR tmpint = 99) then
MOVE 0 TO flag
END-IF
DISPLAY "UPDATE CUGINI.HH SET SMALLTEST = -99;"
* EXEC SQL UPDATE CUGINI.HH
* SET SMALLTEST = -99;
CALL "SUB32" USING SQLCODE
MOVE SQLCODE TO SQL-COD
MOVE SQLCODE TO ii
DISPLAY "SQLCODE should be < 0; its value is ", ii
if (ii NOT < 0) then
MOVE 0 TO flag
END-IF
* EXEC SQL ROLLBACK WORK;
CALL "SUB33" USING SQLCODE
MOVE SQLCODE TO SQL-COD
if ( flag = 1 ) then
DISPLAY " *** pass *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0467','pass','MCO');
CALL "SUB34" USING SQLCODE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " sdl030.sco *** fail *** "
* EXEC SQL INSERT INTO HU.TESTREPORT
* VALUES('0467','fail','MCO');
CALL "SUB35" USING SQLCODE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB36" USING SQLCODE
MOVE SQLCODE TO SQL-COD
******************** END TEST0467 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
[ Dauer der Verarbeitung: 0.56 Sekunden
(vorverarbeitet)
]
|
