|
Quellcode-Bibliothek
© Kompilation durch diese Firma
[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]
Datei:
dml108.cob
Sprache: Cobol
|
|
IDENTIFICATION DIVISION.
PROGRAM-ID. YTS765.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "YTS765.SCO") calling SQL
* procedures in file "YTS765.MCO".
*Copyright 1996 National Computing Centre Ltd,
*and Computer Logic R&D S.A
*on behalf of CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* YTS765.SCO
* WRITTEN BY: Susan Watters
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* Access to TABLE_CONSTRAINTS view
* a) Explicit table constraints in TABLE_CONSTRAINTS view
* b) Column constraints in TABLE_CONSTRAINTS view
* c) Unique identification in TABLE_CONSTRAINTS view
*
*
* REFERENCES
* 21.2.13 TABLE_CONSTRAINTS view
* 21.3.13 TABLE_CONSTRAINTS base table
* F#33 Constraint tables
* F#2 Basic information schema
*
* a) 11.6 SR.1 <table constraint definition>
* 11.6 GR.2
* 11.7 <unique constraint definition>
* 11.8 <referential constraint definition>
* 11.9 <check constraint definition>
*
* b) 11.4 <column definition>
* 11.4 SR.9
* 11.7 <unique constraint definition>
* 11.8 <referential constraint definition>
* 11.9 <check constraint definition>
*
*c) 10.6 <constraint name definition> and
* <constraint attributes>
* 10.6 SR.2
* 11.6 SR.2
*
* DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
* 6th December 1995. Derived table replaced as requires FULL
* SQL.
*
* QA Status: Full FC
*
* Revised by DWF 1996-03-08
* Added rollback after authid
* Fixed identifiers in info schem
* More output
* Removed EXEC SQL from inside printf
* Fixed syntax error
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 consch PIC X(128).
01 tabsch PIC X(128).
01 isdef PIC X(128).
01 co PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 co2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 init PIC X(128).
01 uid PIC X(18).
01 uidx PIC X(18).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 i PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, yts765.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7537 *******************
MOVE 1 TO flag
DISPLAY " TEST7537 "
DISPLAY " Explicit table constrnts in TABLE_CONSTRAINTS
- " view"
DISPLAY "References:"
DISPLAY " 21.2.13 TABLE_CONSTRAINTS view"
DISPLAY " 21.3.13 TABLE_CONSTRAINTS base table"
DISPLAY " F#33 Constraint tables"
DISPLAY " F#2 Basic information schema"
DISPLAY " 11.6 SR.1 "
DISPLAY " 11.6 GR.2"
DISPLAY " 11.7 "
DISPLAY " 11.8 "
DISPLAY " 11.9 "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*initialise host vars
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO consch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO tabsch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO isdef
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO init
DISPLAY "SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
- " IS_DEFERRABLE,"
DISPLAY "INITIALLY_DEFERRED INTO :consch, :tabsch,
- " :isdef,:init"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE TABLE_NAME = 'WORKS3A' AND"
DISPLAY "CONSTRAINT_TYPE = 'FOREIGN KEY';"
* EXEC SQL SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
* IS_DEFERRABLE, INITIALLY_DEFERRED
* INTO :consch, :tabsch, :isdef, :init
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE TABLE_NAME = 'WORKS3A' AND
* CONSTRAINT_TYPE = 'FOREIGN KEY';
CALL "SUB3" USING SQLCODE SQLSTATE consch tabsch isdef init
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "consch is ", consch
DISPLAY "tabsch should be CTS1; its value is ", tabsch
if (tabsch NOT = "CTS1") then
MOVE 0 TO flag
END-IF
DISPLAY "init should be NO; its value is ", init
if (init NOT = "NO") then
MOVE 0 TO flag
END-IF
DISPLAY "isdef should be NO; its value is ", isdef
if (isdef NOT = "NO") then
MOVE 0 TO flag
END-IF
*check reference to UNIQUE constraint
*initialise host vars
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO consch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO tabsch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO isdef
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO init
DISPLAY "SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
- " IS_DEFERRABLE,"
DISPLAY "INITIALLY_DEFERRED INTO :consch, :tabsch,
- " :isdef,:init"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE TABLE_NAME = 'WORKS' AND CONSTRAINT_TYPE =
- " 'UNIQUE';"
* EXEC SQL SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
* IS_DEFERRABLE, INITIALLY_DEFERRED
* INTO :consch, :tabsch, :isdef, :init
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE TABLE_NAME = 'WORKS' AND CONSTRAINT_TYPE = 'UNIQUE'
* ;
CALL "SUB4" USING SQLCODE SQLSTATE consch tabsch isdef init
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "consch is ", consch
DISPLAY "tabsch should be CTS1; its value is ", tabsch
if (tabsch NOT = "CTS1") then
MOVE 0 TO flag
END-IF
DISPLAY "init should be NO; its value is ", init
if (init NOT = "NO") then
MOVE 0 TO flag
END-IF
DISPLAY "isdef should be NO; its value is ", isdef
if (isdef NOT = "NO") then
MOVE 0 TO flag
END-IF
*check references to 'PRIMARY KEY' constraint
*initialise host vars
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO consch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO tabsch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO isdef
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO init
DISPLAY "SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
- " IS_DEFERRABLE,"
DISPLAY "INITIALLY_DEFERRED INTO :consch, :tabsch,
- " :isdef,:init"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE TABLE_NAME = 'STAFF7' AND"
DISPLAY "CONSTRAINT_TYPE = 'PRIMARY KEY';"
* EXEC SQL SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
* IS_DEFERRABLE, INITIALLY_DEFERRED
* INTO :consch, :tabsch, :isdef, :init
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE TABLE_NAME = 'STAFF7' AND CONSTRAINT_TYPE =
* 'PRIMARY KEY';
CALL "SUB5" USING SQLCODE SQLSTATE consch tabsch isdef init
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "consch is ", consch
DISPLAY "tabsch should be CTS1; its value is ", tabsch
if (tabsch NOT = "CTS1") then
MOVE 0 TO flag
END-IF
DISPLAY "init should be NO; its value is ", init
if (init NOT = "NO") then
MOVE 0 TO flag
END-IF
DISPLAY "isdef should be NO; its value is ", isdef
if (isdef NOT = "NO") then
MOVE 0 TO flag
END-IF
*check references to CHECK constraint
*initialise host vars
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO consch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO tabsch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO isdef
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO init
DISPLAY "SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
- " IS_DEFERRABLE,"
DISPLAY "INITIALLY_DEFERRED INTO :consch, :tabsch,
- " :isdef,:init"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE TABLE_NAME = 'STAFF7' AND CONSTRAINT_TYPE =
- " 'CHECK';"
* EXEC SQL SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
* IS_DEFERRABLE, INITIALLY_DEFERRED
* INTO :consch, :tabsch, :isdef, :init
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE TABLE_NAME = 'STAFF7' AND CONSTRAINT_TYPE = 'CHECK'
* ;
CALL "SUB6" USING SQLCODE SQLSTATE consch tabsch isdef init
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "consch is ", consch
DISPLAY "tabsch should be CTS1; its value is ", tabsch
if (tabsch NOT = "CTS1") then
MOVE 0 TO flag
END-IF
DISPLAY "init should be NO; its value is ", init
if (init NOT = "NO") then
MOVE 0 TO flag
END-IF
DISPLAY "isdef should be NO; its value is ", isdef
if (isdef NOT = "NO") then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts765.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7537','pass','MCO');
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts765.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7537','fail','MCO');
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7537 ********************
******************** BEGIN TEST7538 *******************
MOVE 1 TO flag
DISPLAY " TEST7538 "
DISPLAY " Column constraints in TABLE_CONSTRAINTS view"
DISPLAY "References:"
DISPLAY " 21.2.13 TABLE_CONSTRAINTS view"
DISPLAY " 21.3.13 TABLE_CONSTRAINTS base table"
DISPLAY " F#33 Constraint tables"
DISPLAY " F#2 Basic information schema"
DISPLAY " 11.4 "
DISPLAY " 11.4 SR.9"
DISPLAY " 11.7 "
DISPLAY " 11.8 "
DISPLAY " 11.9 check constraint definition>"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*check references to CHECK column constraint
*initialise host vars
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO consch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO tabsch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO isdef
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO init
DISPLAY "SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
- " IS_DEFERRABLE,"
DISPLAY "INITIALLY_DEFERRED INTO :consch, :tabsch,
- " :isdef,:init"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE TABLE_NAME = 'STAFF1' AND"
DISPLAY "CONSTRAINT_TYPE = 'CHECK';"
* EXEC SQL SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
* IS_DEFERRABLE, INITIALLY_DEFERRED
* INTO :consch, :tabsch, :isdef, :init
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE TABLE_NAME = 'STAFF1' AND CONSTRAINT_TYPE = 'CHECK'
* ;
CALL "SUB11" USING SQLCODE SQLSTATE consch tabsch isdef
init
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "consch is ", consch
DISPLAY "tabsch should be CTS1; its value is ", tabsch
if (tabsch NOT = "CTS1") then
MOVE 0 TO flag
END-IF
DISPLAY "init should be NO; its value is ", init
if (init NOT = "NO") then
MOVE 0 TO flag
END-IF
DISPLAY "isdef should be NO; its value is ", isdef
if (isdef NOT = "NO") then
MOVE 0 TO flag
END-IF
*check references to UNIQUE column constraint
*initialise host vars
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO consch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO tabsch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO isdef
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO init
DISPLAY "SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
- " IS_DEFERRABLE,"
DISPLAY "INITIALLY_DEFERRED INTO :consch, :tabsch,
- " :isdef,:init"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE TABLE_NAME = 'STAFF' AND"
DISPLAY "CONSTRAINT_TYPE = 'UNIQUE';"
* EXEC SQL SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
* IS_DEFERRABLE, INITIALLY_DEFERRED
* INTO :consch, :tabsch, :isdef, :init
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE TABLE_NAME = 'STAFF' AND CONSTRAINT_TYPE = 'UNIQUE'
* ;
CALL "SUB12" USING SQLCODE SQLSTATE consch tabsch isdef
init
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "consch is ", consch
DISPLAY "tabsch should be CTS1; its value is ", tabsch
if (tabsch NOT = "CTS1") then
MOVE 0 TO flag
END-IF
DISPLAY "init should be NO; its value is ", init
if (init NOT = "NO") then
MOVE 0 TO flag
END-IF
DISPLAY "isdef should be NO; its value is ", isdef
if (isdef NOT = "NO") then
MOVE 0 TO flag
END-IF
*check references to FOREIGN KEY column constraint
*initialise host vars
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO consch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO tabsch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO isdef
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO init
DISPLAY "SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
- " IS_DEFERRABLE,"
DISPLAY "INITIALLY_DEFERRED INTO :consch, :tabsch,
- " :isdef,:init"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE TABLE_NAME = 'STAFFZ' AND"
DISPLAY "CONSTRAINT_TYPE = 'FOREIGN KEY';"
* EXEC SQL SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
* IS_DEFERRABLE, INITIALLY_DEFERRED
* INTO :consch, :tabsch, :isdef, :init
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE TABLE_NAME = 'STAFFZ' AND CONSTRAINT_TYPE =
* 'FOREIGN KEY';
CALL "SUB13" USING SQLCODE SQLSTATE consch tabsch isdef
init
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "consch is ", consch
DISPLAY "tabsch should be CTS1; its value is ", tabsch
if (tabsch NOT = "CTS1") then
MOVE 0 TO flag
END-IF
DISPLAY "init should be NO; its value is ", init
if (init NOT = "NO") then
MOVE 0 TO flag
END-IF
DISPLAY "isdef should be NO; its value is ", isdef
if (isdef NOT = "NO") then
MOVE 0 TO flag
END-IF
*check references to CHECK column constraint
*initialise host vars
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO consch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO tabsch
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO isdef
MOVE "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooooooooooooooooooooooooooooooooooo
- "oooooooo" TO init
DISPLAY "SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
- " IS_DEFERRABLE,"
DISPLAY "INITIALLY_DEFERRED INTO :consch, :tabsch,
- " :isdef,:init"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE TABLE_NAME = 'STAFFZ' AND"
DISPLAY "CONSTRAINT_TYPE = 'CHECK';"
* EXEC SQL SELECT CONSTRAINT_SCHEMA, TABLE_SCHEMA,
* IS_DEFERRABLE, INITIALLY_DEFERRED
* INTO :consch, :tabsch, :isdef, :init
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE TABLE_NAME = 'STAFFZ' AND CONSTRAINT_TYPE = 'CHECK'
* ;
CALL "SUB14" USING SQLCODE SQLSTATE consch tabsch isdef
init
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "consch is ", consch
DISPLAY "tabsch should be CTS1; its value is ", tabsch
if (tabsch NOT = "CTS1") then
MOVE 0 TO flag
END-IF
DISPLAY "init should be NO; its value is ", init
if (init NOT = "NO") then
MOVE 0 TO flag
END-IF
DISPLAY "isdef should be NO; its value is ", isdef
if (isdef NOT = "NO") then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB15" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts765.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7538','pass','MCO');
CALL "SUB16" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts765.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7538','fail','MCO');
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7538 ********************
******************** BEGIN TEST7539 *******************
MOVE 1 TO flag
DISPLAY " TEST7539 "
DISPLAY " Unique identification in TABLE_CONSTRAINTS
- " view"
DISPLAY "References:"
DISPLAY " 21.2.13 TABLE_CONSTRAINTS view"
DISPLAY " 21.3.13 TABLE_CONSTRAINTS base table"
DISPLAY " F#33 Constraint tables"
DISPLAY " F#2 Basic information schema"
DISPLAY " 10.6 and"
DISPLAY "
DISPLAY " 10.6 SR.2"
DISPLAY " 11.6 SR.2"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*determine that values in CONSTRAINT_CATALOG are not NULL
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co "
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE CONSTRAINT_CATALOG IS NULL;"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE CONSTRAINT_CATALOG IS NULL;
CALL "SUB19" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 0; its value is ", co
if (co NOT = 0) then
MOVE 0 TO flag
END-IF
*determine that values in CONSTRAINT_SCHEMA are not NULL
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE CONSTRAINT_SCHEMA IS NULL;"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE CONSTRAINT_SCHEMA IS NULL;
CALL "SUB20" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 0; its value is ", co
if (co NOT = 0) then
MOVE 0 TO flag
END-IF
*determine that values in CONSTRAINT_NAME are not NULL
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE CONSTRAINT_NAME IS NULL;"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE CONSTRAINT_NAME IS NULL;
CALL "SUB21" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 0; its value is ", co
if (co NOT = 0) then
MOVE 0 TO flag
END-IF
*determine that CONSTRAINT_CATALOG,CONSTRAINT_NAME,CONSTRAINT_SC
*contain a different set of values in each row
*initialise host variables
COMPUTE co = -1
COMPUTE co2 = -1
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS;"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS;
CALL "SUB22" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "SELECT COUNT (*) INTO :co2"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS AS T"
DISPLAY "WHERE"
DISPLAY "UNIQUE ("
DISPLAY " SELECT * FROM
- " INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY " WHERE CONSTRAINT_CATALOG =
- " T.CONSTRAINT_CATALOG AND"
DISPLAY " CONSTRAINT_NAME = T.CONSTRAINT_NAME AND"
DISPLAY " CONSTRAINT_SCHEMA = T.CONSTRAINT_SCHEMA"
DISPLAY " );"
* EXEC SQL SELECT COUNT (*) INTO :co2
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS AS T
* WHERE
* UNIQUE (
* SELECT * FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE CONSTRAINT_CATALOG = T.CONSTRAINT_CATALOG AND
* CONSTRAINT_NAME = T.CONSTRAINT_NAME AND
* CONSTRAINT_SCHEMA = T.CONSTRAINT_SCHEMA
* );
CALL "SUB23" USING SQLCODE SQLSTATE co2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be equal to co2; co is ", co, ", co2 is
- " ", co2
if (co NOT = co2) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK"
* EXEC SQL ROLLBACK WORK;
CALL "SUB24" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts765.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7539','pass','MCO');
CALL "SUB25" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts765.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7539','fail','MCO');
CALL "SUB26" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB27" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7539 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.43 Sekunden
(vorverarbeitet)
¤
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
|
|
