|
Quellcode-Bibliothek
© Kompilation durch diese Firma
[Weder Korrektheit noch Funktionsfähigkeit der Software werden zugesichert.]
Datei:
yts766.cob
Sprache: Cobol
|
|
IDENTIFICATION DIVISION.
PROGRAM-ID. YTS766.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "YTS766.SCO") calling SQL
* procedures in file "YTS766.MCO".
*Copyright 1996 National Computing Centre Ltd,
*and Computer Logic R&D S.A
*on behalf of CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* YTS766.SCO
* WRITTEN BY: Susan Watters
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* Access to REFERENTIAL_CONSTRAINTS view
* a)Explicit table constraints in REFERENTIAL_CONSTRAINTS view
* b)Column constraints in REFERENTIAL_CONSTRAINTS view
* c)Unique identification in REFERENTIAL_CONSTRAINTS view
* d)Values in columns of REFERENTIAL_CONSTRAINTS view
*
*
* REFERENCES
* 21.2.14 REFERENTIAL_CONSTRAINTS view
* 21.3.15 REFERENTIAL_CONSTRAINTS base table
* F# 33 Constraint tables
* F# 2 Basic information schema
*
* a) 11.8 <referential constraint definition>
* 11.6 SR.2
* 11.6 GR.2 <table constraint definition>
* 21.2.13 TABLE_CONSTRAINTS view
*
* b) 11.8 <referential constraint definition>
* 11.4 <column definition>
* 11.4 SR.9
* 11.6 SR.2
* 21.2.13 TABLE_CONSTRAINTS view
*
* c) 10.6 <constraint name definition> and
* <constraint attributes>
* 10.6 SR.2
* 11.6 SR.2
*
* d) 21.3.15 F
* 11.8 LR 1a
* 11.8 LR 2a
*
* DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
* Character strings NULL terminated. 5th December 1995.
*
* QA Status: Full FC
*
* Revised by DWF 1996-03-08
* Added rollback after authid
* Fixed identifiers in info schem
* More output
* Removed EXEC SQL from inside printf
* Fixed syntax error
* Cleanups
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 co PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 co2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 connam PIC X(128).
01 unicon PIC X(128).
01 mopt PIC X(128).
01 upr PIC X(128).
01 delr PIC X(128).
01 uid PIC X(18).
01 uidx PIC X(18).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 i PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Module COBOL, yts766.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7540 *******************
MOVE 1 TO flag
DISPLAY " TEST7540 "
DISPLAY " Explicit table constrnts -
- " REFERENTIAL_CONSTRAINTS"
DISPLAY "References:"
DISPLAY " 21.2.14 REFERENTIAL_CONSTRAINTS view"
DISPLAY " 21.3.15 REFERENTIAL_CONSTRAINTS base table"
DISPLAY " F# 33 Constraint tables"
DISPLAY " F# 2 Basic information schema"
DISPLAY " 11.8 "
DISPLAY " 11.6 SR.2"
DISPLAY " 11.6 GR.2 "
DISPLAY " 21.2.13 TABLE_CONSTRAINTS view"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*initialise all variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO connam
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO unicon
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO mopt
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO upr
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO delr
*entry for table constraint referencing table in same schema
*select constraint name from TABLE_CONSTRAINTS
DISPLAY "SELECT CONSTRAINT_NAME INTO :connam"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE TABLE_NAME = 'WORKS3A' AND"
DISPLAY "CONSTRAINT_TYPE = 'FOREIGN KEY';"
* EXEC SQL SELECT CONSTRAINT_NAME INTO :connam
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE TABLE_NAME = 'WORKS3A' AND
* CONSTRAINT_TYPE = 'FOREIGN KEY';
CALL "SUB3" USING SQLCODE SQLSTATE connam
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*check row is mentioned in REFERENTIAL_CONSTRAINTS view
DISPLAY "SELECT UNIQUE_CONSTRAINT_SCHEMA, MATCH_OPTION"
DISPLAY "UPDATE_RULE, DELETE_RULE"
DISPLAY "INTO :unicon, :mopt, :upr, :delr"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE CONSTRAINT_NAME = :connam;"
* EXEC SQL SELECT UNIQUE_CONSTRAINT_SCHEMA, MATCH_OPTION,
* UPDATE_RULE,DELETE_RULE
* INTO :unicon, :mopt, :upr, :delr
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE CONSTRAINT_NAME = :connam;
CALL "SUB4" USING SQLCODE SQLSTATE unicon mopt upr delr
connam
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "unicon is ", unicon
DISPLAY "mopt should be NONE; its value is ", mopt
DISPLAY "upr should be NO ACTION; its value is ", upr
DISPLAY "delr should be NO ACTION; its value is ", delr
if (mopt NOT = "NONE") then
MOVE 0 TO flag
END-IF
if (upr NOT = "NO ACTION") then
MOVE 0 TO flag
END-IF
if (delr NOT = "NO ACTION") then
MOVE 0 TO flag
END-IF
*check entry for table constraint ref table in different schema
*initialise all variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO connam
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO unicon
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO mopt
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO upr
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO delr
*entry for table constraint referencing table in different schem
*select constraint name from TABLE_CONSTRAINTS
DISPLAY "SELECT CONSTRAINT_NAME INTO :connam"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE TABLE_NAME = 'COMP_BUDG' AND"
DISPLAY "CONSTRAINT_TYPE = 'FOREIGN KEY';"
* EXEC SQL SELECT CONSTRAINT_NAME INTO :connam
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE TABLE_NAME = 'COMP_BUDG' AND
* CONSTRAINT_TYPE = 'FOREIGN KEY';
CALL "SUB5" USING SQLCODE SQLSTATE connam
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*check row is mentioned in REFERENTIAL_CONSTRAINTS view
DISPLAY "SELECT UNIQUE_CONSTRAINT_SCHEMA, MATCH_OPTION"
DISPLAY "UPDATE_RULE, DELETE_RULE"
DISPLAY "INTO :unicon, :mopt, :upr, :delr"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE CONSTRAINT_NAME = :connam;"
* EXEC SQL SELECT UNIQUE_CONSTRAINT_SCHEMA, MATCH_OPTION,
* UPDATE_RULE,DELETE_RULE
* INTO :unicon, :mopt, :upr, :delr
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE CONSTRAINT_NAME = :connam;
CALL "SUB6" USING SQLCODE SQLSTATE unicon mopt upr delr
connam
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "unicon is ", unicon
DISPLAY "mopt should be NONE; its value is ", mopt
DISPLAY "upr should be NO ACTION; its value is ", upr
DISPLAY "delr should be NO ACTION; its value is ", delr
if (mopt NOT = "NONE") then
MOVE 0 TO flag
END-IF
if (upr NOT = "NO ACTION") then
MOVE 0 TO flag
END-IF
if (delr NOT = "NO ACTION") then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts766.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7540','pass','MCO');
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts766.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7540','fail','MCO');
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7540 ********************
******************** BEGIN TEST7541 *******************
MOVE 1 TO flag
DISPLAY " TEST7541 "
DISPLAY " Column constraints in REFERENTIAL_CONSTRAINTS
- " view"
DISPLAY "References:"
DISPLAY " 21.2.14 REFERENTIAL_CONSTRAINTS view"
DISPLAY " 21.3.15 REFERENTIAL_CONSTRAINTS base
- " table"
DISPLAY " F# 33 Constraint tables"
DISPLAY " F# 2 Basic information schema"
DISPLAY " 11.8
- " definition>"
DISPLAY " 11.4 "
DISPLAY " 11.4 SR.9"
DISPLAY " 11.6 SR.2"
DISPLAY " 21.2.13 TABLE_CONSTRAINTS view"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*initialise all variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO connam
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO unicon
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO mopt
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO upr
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO delr
*find constraint_name from TABLE_CONSTRAINTS view
DISPLAY "SELECT CONSTRAINT_NAME INTO :connam"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE TABLE_NAME = 'STAFFZ' AND"
DISPLAY "CONSTRAINT_TYPE = 'FOREIGN KEY';"
* EXEC SQL SELECT CONSTRAINT_NAME INTO :connam
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE TABLE_NAME = 'STAFFZ' AND
* CONSTRAINT_TYPE = 'FOREIGN KEY';
CALL "SUB11" USING SQLCODE SQLSTATE connam
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*check row is referenced in REFERENTIAL_CONSTRAINTS view
DISPLAY "SELECT UNIQUE_CONSTRAINT_SCHEMA, MATCH_OPTION,"
DISPLAY "UPDATE_RULE, DELETE_RULE INTO :unicon, :mopt,
- " :upr, :delr"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE CONSTRAINT_NAME = :connam;"
* EXEC SQL SELECT UNIQUE_CONSTRAINT_SCHEMA, MATCH_OPTION,
* UPDATE_RULE, DELETE_RULE INTO :unicon, :mopt, :upr, :delr
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE CONSTRAINT_NAME = :connam;
CALL "SUB12" USING SQLCODE SQLSTATE unicon mopt upr delr
connam
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "unicon is ", unicon
DISPLAY "mopt should be NONE; its value is ", mopt
DISPLAY "upr should be NO ACTION; its value is ", upr
DISPLAY "delr should be NO ACTION; its value is ", delr
if (mopt NOT = "NONE") then
MOVE 0 TO flag
END-IF
if (upr NOT = "NO ACTION") then
MOVE 0 TO flag
END-IF
if (delr NOT = "NO ACTION") then
MOVE 0 TO flag
END-IF
*Col constraint to reference other schema
*initialise all variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO connam
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO unicon
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO mopt
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO upr
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO delr
*find constraint name from TABLE_CONSTRAINTS
DISPLAY "SELECT CONSTRAINT_NAME INTO :connam"
DISPLAY "FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS"
DISPLAY "WHERE TABLE_NAME = 'PROJ_STATUS' AND"
DISPLAY "CONSTRAINT_TYPE = 'FOREIGN KEY'"
* EXEC SQL SELECT CONSTRAINT_NAME INTO :connam
* FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS
* WHERE TABLE_NAME = 'PROJ_STATUS' AND
* CONSTRAINT_TYPE = 'FOREIGN KEY';
CALL "SUB13" USING SQLCODE SQLSTATE connam
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*check row is referenced in REFERENTIAL_CONSTRAINTS view
DISPLAY "SELECT UNIQUE_CONSTRAINT_SCHEMA, MATCH_OPTION,"
DISPLAY "UPDATE_RULE, DELETE_RULE INTO :unicon, :mopt,
- " :upr, :delr"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE CONSTRAINT_NAME = :connam;"
* EXEC SQL SELECT UNIQUE_CONSTRAINT_SCHEMA, MATCH_OPTION,
* UPDATE_RULE, DELETE_RULE INTO :unicon, :mopt, :upr, :delr
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE CONSTRAINT_NAME = :connam;
CALL "SUB14" USING SQLCODE SQLSTATE unicon mopt upr delr
connam
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "unicon is ", unicon
DISPLAY "mopt should be NONE; its value is ", mopt
DISPLAY "upr should be NO ACTION; its value is ", upr
DISPLAY "delr should be NO ACTION; its value is ", delr
if (mopt NOT = "NONE") then
MOVE 0 TO flag
END-IF
if (upr NOT = "NO ACTION") then
MOVE 0 TO flag
END-IF
if (delr NOT = "NO ACTION") then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB15" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts766.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7541','pass','MCO');
CALL "SUB16" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts766.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7541','fail','MCO');
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7541 ********************
******************** BEGIN TEST7542 *******************
MOVE 1 TO flag
DISPLAY " TEST7542 "
DISPLAY " Unique id in REFERENTIAL_CONSTRAINTS view"
DISPLAY "References:"
DISPLAY " 21.2.14 REFERENTIAL_CONSTRAINTS view"
DISPLAY " 21.3.15 REFERENTIAL_CONSTRAINTS base table"
DISPLAY " F# 33 Constraint tables"
DISPLAY " F# 2 Basic information schema"
DISPLAY " 10.6 and"
DISPLAY " "
DISPLAY " 10.6 SR.2"
DISPLAY " 11.6 SR.2"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*reinitialise variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO connam
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO unicon
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO mopt
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO upr
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO delr
*check no values of CONSTRAINT_CATALOG are NULL
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE CONSTRAINT_CATALOG IS NULL"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE CONSTRAINT_CATALOG IS NULL;
CALL "SUB19" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 0; its value is ", co
if (co NOT = 0) then
MOVE 0 TO flag
END-IF
*check no values of CONSTRAINT_SCHEMA are NULL
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE CONSTRAINT_SCHEMA IS NULL"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE CONSTRAINT_SCHEMA IS NULL;
CALL "SUB20" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 0; its value is ", co
if (co NOT = 0) then
MOVE 0 TO flag
END-IF
*check no values of CONSTRAINT_NAME are NULL
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE CONSTRAINT_NAME IS NULL;"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE CONSTRAINT_NAME IS NULL;
CALL "SUB21" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 0; its value is ", co
if (co NOT = 0) then
MOVE 0 TO flag
END-IF
*check CATALOG SCHEMA & NAME have diff set of vals in each row
MOVE 99 TO co
MOVE 98 TO co2
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS;"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS;
CALL "SUB22" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "SELECT COUNT (*) INTO :co2"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS AS
- " T"
DISPLAY "WHERE"
DISPLAY "UNIQUE ("
DISPLAY " SELECT * FROM
- " INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY " WHERE CONSTRAINT_CATALOG =
- " T.CONSTRAINT_CATALOG AND"
DISPLAY " CONSTRAINT_NAME = T.CONSTRAINT_NAME AND"
DISPLAY " CONSTRAINT_SCHEMA = T.CONSTRAINT_SCHEMA"
DISPLAY " );"
* EXEC SQL SELECT COUNT (*) INTO :co2
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS AS T
* WHERE
* UNIQUE (
* SELECT * FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE CONSTRAINT_CATALOG = T.CONSTRAINT_CATALOG AND
* CONSTRAINT_NAME = T.CONSTRAINT_NAME AND
* CONSTRAINT_SCHEMA = T.CONSTRAINT_SCHEMA
* );
CALL "SUB23" USING SQLCODE SQLSTATE co2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be equal to co2; co is ", co, ", co2 is
- " ", co2
if (co NOT = co2) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB24" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts766.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7542','pass','MCO');
CALL "SUB25" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts766.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7542','fail','MCO');
CALL "SUB26" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB27" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7542 ********************
******************** BEGIN TEST7543 *******************
MOVE 1 TO flag
DISPLAY " TEST7543 "
DISPLAY " Values in columns of REFERENTIAL_CONSTRAINTS
- " view"
DISPLAY "References:"
DISPLAY " 21.2.14 REFERENTIAL_CONSTRAINTS view"
DISPLAY " 21.3.15 REFERENTIAL_CONSTRAINTS base table"
DISPLAY " F# 33 Constraint tables"
DISPLAY " F# 2 Basic information schema"
DISPLAY " 21.3.15 F"
DISPLAY " 11.8 LR.1a"
DISPLAY " 11.8 LR.2a"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*Check that vals in UNIQUE_CONSTRAINT_CATALOG are NON-NULL
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE UNIQUE_CONSTRAINT_CATALOG IS NULL;"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE UNIQUE_CONSTRAINT_CATALOG IS NULL;
CALL "SUB28" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 0; its value is ", co
if (co NOT = 0) then
MOVE 0 TO flag
END-IF
*Check that vals in UNIQUE_CONSTRAINT_SCHEMA are NON_NULL
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE UNIQUE_CONSTRAINT_SCHEMA IS NULL"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE UNIQUE_CONSTRAINT_SCHEMA IS NULL;
CALL "SUB29" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 0; its value is ", co
if (co NOT = 0) then
MOVE 0 TO flag
END-IF
*Check values in UNIQUE_CONSTRAINT_NAME are NON_NULL
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE UNIQUE_CONSTRAINT_NAME IS NULL;"
* EXEC SQL SELECT COUNT(*) INTO :co
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE UNIQUE_CONSTRAINT_NAME IS NULL;
CALL "SUB30" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 0; its value is ", co
if (co NOT = 0) then
MOVE 0 TO flag
END-IF
*Check values in MATCH_OPTION are NON_NULL
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE MATCH_OPTION IS NULL;"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE MATCH_OPTION IS NULL;
CALL "SUB31" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 0; its value is ", co
if (co NOT = 0) then
MOVE 0 TO flag
END-IF
*Check values in UPDATE_RULE are NON_NULL
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE UPDATE_RULE IS NULL;"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE UPDATE_RULE IS NULL;
CALL "SUB32" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 0; its value is ", co
if (co NOT = 0) then
MOVE 0 TO flag
END-IF
*Check values in DELETE_RULE are NON_NULL
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE DELETE_RULE IS NULL;"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE DELETE_RULE IS NULL;
CALL "SUB33" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 0; its value is ", co
if (co NOT = 0) then
MOVE 0 TO flag
END-IF
*Check values in Match col are in NONE, PARTIAL, FULL
MOVE 99 TO co
COMPUTE co2 = -1
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS;"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS;
CALL "SUB34" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "SELECT COUNT (*) INTO :co2"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE MATCH_OPTION IN ('NONE','PARTIAL','FULL`)"
* EXEC SQL SELECT COUNT (*) INTO :co2
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE MATCH_OPTION IN ('NONE','PARTIAL','FULL');
CALL "SUB35" USING SQLCODE SQLSTATE co2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co2 should be equal to co; co is ", co, ", co2 is
- " ", co2
if (co NOT = co2) then
MOVE 0 TO flag
END-IF
*Check vals in UPDATE_RULE in CASCADE, SET NULL,SET DEFAULT,NO A
COMPUTE co2 = -1
DISPLAY "SELECT COUNT (*) INTO :co2"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE UPDATE_RULE IN ('CASCADE','SET NULL`,`SET
- " DEFAULT'"
DISPLAY "'NO ACTION')"
* EXEC SQL SELECT COUNT (*) INTO :co2
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE UPDATE_RULE IN
* ('CASCADE','SET NULL','SET DEFAULT','NO ACTION');
CALL "SUB36" USING SQLCODE SQLSTATE co2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co2 should be equal to co; co is ", co, ", co2 is
- " ", co2
if (co NOT = co2) then
MOVE 0 TO flag
END-IF
*Check vals in DELETE_RULE in CASCADE,SET NULL,SET DEFAULT,NO AC
COMPUTE co2 = -1
DISPLAY "SELECT COUNT (*) INTO :co2"
DISPLAY "FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS"
DISPLAY "WHERE DELETE_RULE IN ('CASCADE','SET NULL','SET
- " DEFAULT',"
DISPLAY "'NO ACTION');"
* EXEC SQL SELECT COUNT (*) INTO :co2
* FROM INFORMATION_SCHEMA.REFERENTIAL_CONSTRAINTS
* WHERE DELETE_RULE IN
* ('CASCADE','SET NULL','SET DEFAULT','NO ACTION');
CALL "SUB37" USING SQLCODE SQLSTATE co2
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co2 should be equal to co; co is ", co, ", co2 is
- " ", co2
if (co NOT = co2) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB38" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts766.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7543','pass','MCO');
CALL "SUB39" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts766.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7543','fail','MCO');
CALL "SUB40" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB41" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7543 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.47 Sekunden
(vorverarbeitet)
¤
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
|
|
