|
IDENTIFICATION DIVISION.
PROGRAM-ID. YTS769.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "YTS769.SCO") calling SQL
* procedures in file "YTS769.MCO".
*Copyright 1996 National Computing Centre Limited,
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* YTS769.SCO
* WRITTEN BY: Susan Watters
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests Access to DOMAINS view
*
*
* REFERENCES
* 21.2.5 DOMAINS view
* 11.21 <domain definition>
* F#35 Intermediate information schema
* F#17 Multiple schemas per user
* F#25 Domain definition
*
* DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
*
* QA Status: Full FC
*
* Revised by DWF 1996-03-12
* Added rollback after authid
* Removed EXEC SQL from inside printf
* Fixed syntax errors
* Major cleanups
* Removed unused variables and surplus syntax
* Harmonized printouts with statements
* Fixed pass criteria
* Fixed info schem identifiers
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 co PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 domsch PIC X(128).
01 dtype PIC X(29).
01 domn PIC X(128).
01 uid PIC X(18).
01 uidx PIC X(18).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 i PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 flag2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 flag3 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 flag4 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 flag5 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Module COBOL, yts769.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7551 *******************
MOVE 1 TO flag
DISPLAY " TEST7551 "
DISPLAY " Access to DOMAINS view"
DISPLAY "References:"
DISPLAY " 21.2.5 DOMAINS view"
DISPLAY " 11.21 "
DISPLAY " F#35 Intermediate information schema"
DISPLAY " F#17 Multiple schemas per user"
DISPLAY " F#25 Domain definition>"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
*This view has already been tested along with the errata columns
*yts750
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*prepare database
*On startup there is a domain CTS1.ESAL and a domain CTS1B.ESAL
*Both owned by CTS1
DISPLAY "DROP DOMAIN CTS1b.esal CASCADE;"
* EXEC SQL DROP DOMAIN CTS1b.esal CASCADE;
CALL "SUB3" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB4" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*initialise all host variables
MOVE "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
- "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
- "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
- "bbbbbbbb" TO domsch
MOVE "hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
- "hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
- "hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
- "hhhhhhhh" TO domn
MOVE "ccccccccccccccccccccccccccccc" TO dtype
*initialise all flags
MOVE 1 TO flag2
MOVE 1 TO flag3
MOVE 1 TO flag4
MOVE 1 TO flag5
*declare cursor
DISPLAY "DECLARE data769 CURSOR FOR"
DISPLAY "SELECT DOMAIN_SCHEMA, DOMAIN_NAME, DATA_TYPE"
DISPLAY "FROM INFORMATION_SCHEMA.DOMAINS"
DISPLAY "WHERE DOMAIN_NAME IN"
DISPLAY "('ESAL','NUMDOM','DOMCHAR','DOMSMALL');"
* EXEC SQL DECLARE data769 CURSOR FOR
* SELECT DOMAIN_SCHEMA, DOMAIN_NAME, DATA_TYPE
* FROM INFORMATION_SCHEMA.DOMAINS
* WHERE DOMAIN_NAME IN
* ('ESAL','NUMDOM','DOMCHAR','DOMSMALL') END-EXEC
*The surviving ESAL is in CTS1
*DOMCHAR and DOMSMALL are in CTS1B
*NUMDOM is in CTS2 with usage granted to CTS1
DISPLAY "OPEN data769"
* EXEC SQL OPEN data769;
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
.
P100.
DISPLAY " "
DISPLAY "FETCH DATA769 INTO :domsch, :domn, :dtype;"
* EXEC SQL FETCH DATA769 INTO :domsch, :domn, :dtype;
CALL "SUB6" USING SQLCODE SQLSTATE domsch domn dtype
MOVE SQLCODE TO SQL-COD
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "00000") then
GO TO P101
END-IF
PERFORM CHCKOK
DISPLAY "(Checking for legal values)"
if (domn = "ESAL" AND flag2 = 1) then
GO TO P102
else
GO TO P103
END-IF
.
P102.
MOVE 0 TO flag2
DISPLAY "domain 'ESAL' returned "
if (domsch NOT = "CTS1 " OR dtype NOT =
"INTEGER") then
MOVE 0 TO flag
DISPLAY "Domain schema 'CTS1' expected, got ", domsch
DISPLAY "Datatype INTEGER expected, got ", dtype
END-IF
GO TO P100
.
P103.
if (domn = "NUMDOM" AND flag3 = 1) then
GO TO P104
else
GO TO P105
END-IF
.
P104.
MOVE 0 TO flag3
DISPLAY "domain 'NUMDOM' returned "
if (domsch NOT = "CTS2" OR dtype NOT = "INTEGER")
then
MOVE 0 TO flag
DISPLAY "Domain schema 'CTS2' expected, got ", domsch
DISPLAY "Datatype INTEGER expected, got ", dtype
END-IF
GO TO P100
.
P105.
if (domsch = "CTS1B") then
if (domn = "DOMCHAR" AND flag4 = 1) then
GO TO P106
END-IF
GO TO P107
END-IF
DISPLAY "Incorrect domain returned"
DISPLAY "Domain schema is ", domsch
DISPLAY "Domain name is ", domn
GO TO P100
.
P106.
MOVE 0 TO flag4
DISPLAY "domain 'DOMCHAR' returned "
if (dtype NOT = "CHARACTER") then
DISPLAY "Datatype CHARACTER expected, got ", dtype
MOVE 0 TO flag
END-IF
GO TO P100
.
P107.
if (domn = "DOMSMALL" AND flag5 = 1) then
DISPLAY "Domain 'DOMSMALL' returned"
MOVE 0 TO flag5
if (dtype NOT = "SMALLINT") then
DISPLAY "Datatype SMALLINT expected, got ", dtype
MOVE 0 TO flag
END-IF
else
DISPLAY "Incorrect domain returned"
DISPLAY "Domain schema is ", domsch
DISPLAY "Domain name is ", domn
MOVE 0 TO flag
END-IF
GO TO P100
.
P101.
DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 100 OR NORMSQ NOT = "02000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
*check all correct rows returned
if (flag2 = 0 AND flag3 = 0 AND flag4 = 0 AND
flag5 = 0) then
DISPLAY "All the expected rows were correctly returned"
else
DISPLAY "Not all the expected rows were correctly
- " returned"
MOVE 0 TO flag
END-IF
DISPLAY " "
*close cursor
DISPLAY "CLOSE data769"
* EXEC SQL CLOSE data769;
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*create domain esal in schema CTS1b
*an identical domain already exists in CTS1
DISPLAY "CREATE DOMAIN cts1b.esal AS INTEGER"
* EXEC SQL CREATE DOMAIN cts1b.esal AS INTEGER;
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK"
* EXEC SQL COMMIT WORK;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*check new domain is referenced in INFORMATION_SCHEMA.DOMAINS
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.DOMAINS"
DISPLAY "WHERE DOMAIN_NAME = 'ESAL';"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.DOMAINS
* WHERE DOMAIN_NAME = 'ESAL';
CALL "SUB11" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 2; its value is ", co
if (co NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB12" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*drop domain cts1b.esal
DISPLAY "DROP DOMAIN cts1b.esal CASCADE;"
* EXEC SQL DROP DOMAIN cts1b.esal CASCADE;
CALL "SUB13" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB14" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*check reference to cts1b.esal is removed from DOMAINS view
MOVE 99 TO co
DISPLAY "SELECT COUNT (*) INTO :co"
DISPLAY "FROM INFORMATION_SCHEMA.DOMAINS"
DISPLAY "WHERE DOMAIN_NAME = 'ESAL';"
* EXEC SQL SELECT COUNT (*) INTO :co
* FROM INFORMATION_SCHEMA.DOMAINS
* WHERE DOMAIN_NAME = 'ESAL';
CALL "SUB15" USING SQLCODE SQLSTATE co
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be 1; its value is ", co
if (co NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB16" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*ensure database is left in a consistent state
DISPLAY "CREATE DOMAIN cts1b.esal AS INTEGER"
DISPLAY "CHECK (VALUE>500);"
* EXEC SQL CREATE DOMAIN cts1b.esal AS INTEGER
* CHECK (VALUE>500);
CALL "SUB17" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
* EXEC SQL COMMIT WORK;
CALL "SUB18" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts769.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7551','pass','MCO');
CALL "SUB19" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts769.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7551','fail','MCO');
CALL "SUB20" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB21" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7551 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.29 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
