|
IDENTIFICATION DIVISION.
PROGRAM-ID. YTS772.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Standard COBOL (file "YTS772.SCO") calling SQL
* procedures in file "YTS772.MCO".
*Copyright 1996 National Computing Centre Ltd,
*and Computer Logic R&D S.A
*on behalf of CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* YTS772.SCO
* WRITTEN BY: Susan Watters
* TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
*
* This routine tests Access to ASSERTIONS view
*
*
* REFERENCES
* 21.2.17 ASSERTIONS view
* F#35 Intermediate information schema
*
* DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
*
* QA Status: Full FC
*
* Revised by DWF 1996-03-13
* Added rollback after authid
* Renamed variables
* More output
* Removed EXEC SQL from inside printf
* Rearranged, cleaned up
* Fixed syntax error
* Changed code to do what the comments said it should do
****************************************************************
* EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 co1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 cc PIC X(128).
01 cs PIC X(128).
01 cn PIC X(128).
01 id PIC X(18).
01 inid PIC X(18).
01 uid PIC X(18).
01 uidx PIC X(18).
* EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 i PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
* EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
CALL "SUB1" USING SQLCODE SQLSTATE uidx
MOVE SQLCODE TO SQL-COD
* EXEC SQL ROLLBACK WORK;
CALL "SUB2" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Module COBOL, yts772.sco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST7554 *******************
MOVE 1 TO flag
DISPLAY " TEST7554 "
DISPLAY " Access to ASSERTIONS view"
DISPLAY "References:"
DISPLAY " 21.2.17 ASSERTIONS view"
DISPLAY " F#35 Intermediate information schema"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "The ASSERTIONS view is required in Intermediate
- " SQL F#35,"
DISPLAY "but actual assertions are not required until Full
- " SQL F#52."
DISPLAY "The ASSERTIONS view does not have to contain
- " anything for"
DISPLAY "Intermediate conformance, but if it does, it has
- " to be valid"
DISPLAY "data."
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*initialise variables
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO cc
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO cs
MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
- "xxxxxxxx" TO cn
MOVE "xxxxxxxxxxxxxxxxxx" TO id
MOVE "xxxxxxxxxxxxxxxxxx" TO inid
*check IS_DEFERRABLE contains no NULL values
MOVE 99 TO co1
DISPLAY "SELECT COUNT (*) INTO :co1"
DISPLAY "FROM INFORMATION_SCHEMA.ASSERTIONS"
DISPLAY "WHERE IS_DEFERRABLE IS NULL;"
* EXEC SQL SELECT COUNT (*) INTO :co1
* FROM INFORMATION_SCHEMA.ASSERTIONS
* WHERE IS_DEFERRABLE IS NULL;
CALL "SUB3" USING SQLCODE SQLSTATE co1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co1 should be 0; its value is ", co1
if (co1 NOT = 0) then
MOVE 0 TO flag
END-IF
*check INITIALLY_DEFERRED contains no NULL values
MOVE 99 TO co1
DISPLAY "SELECT COUNT (*) INTO :co1"
DISPLAY "FROM INFORMATION_SCHEMA.ASSERTIONS"
DISPLAY "WHERE INITIALLY_DEFERRED IS NULL;"
* EXEC SQL SELECT COUNT (*) INTO :co1
* FROM INFORMATION_SCHEMA.ASSERTIONS
* WHERE INITIALLY_DEFERRED IS NULL;
CALL "SUB4" USING SQLCODE SQLSTATE co1
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co1 should be 0; its value is ", co1
if (co1 NOT = 0) then
MOVE 0 TO flag
END-IF
*declare cursor to return all rows of ASSERTIONS view
DISPLAY "DECLARE data772 CURSOR FOR"
DISPLAY "SELECT CONSTRAINT_CATALOG, CONSTRAINT_SCHEMA,"
DISPLAY "CONSTRAINT_NAME, IS_DEFERRABLE,
- " INITIALLY_DEFERRED"
DISPLAY "FROM INFORMATION_SCHEMA.ASSERTIONS;"
* EXEC SQL DECLARE data772 CURSOR FOR
* SELECT CONSTRAINT_CATALOG, CONSTRAINT_SCHEMA,
* CONSTRAINT_NAME, IS_DEFERRABLE, INITIALLY_DEFERRED
* FROM INFORMATION_SCHEMA.ASSERTIONS END-EXEC
DISPLAY "OPEN data772;"
* EXEC SQL OPEN data772;
CALL "SUB5" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*check IS_DEFERRABLE and INITIALLY_DEFERRED
*contain acceptable values
DISPLAY "For the following fetches, if id is NO, then inid
- " must also"
DISPLAY "be NO."
.
P101.
DISPLAY "FETCH data772 INTO :cc, :cs, :cn, :id, :inid;"
* EXEC SQL FETCH data772 INTO :cc, :cs, :cn, :id, :inid
* ;
CALL "SUB6" USING SQLCODE SQLSTATE cc cs cn id inid
MOVE SQLCODE TO SQL-COD
if (SQLCODE NOT = 0) then
GO TO P100
END-IF
PERFORM CHCKOK
DISPLAY "id should be YES or NO; its value is ", id
DISPLAY "inid should be YES or NO; its value is ", inid
if (id NOT = "NO" AND id NOT = "YES") then
MOVE 0 TO flag
END-IF
if (inid NOT = "NO" AND inid NOT = "YES") then
MOVE 0 TO flag
END-IF
if (id = "NO" AND inid NOT = "NO") then
MOVE 0 TO flag
END-IF
GO TO P101
.
P100.
DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 100 OR NORMSQ NOT = "02000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "02000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
DISPLAY "ROLLBACK WORK;"
* EXEC SQL ROLLBACK WORK;
CALL "SUB7" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts772.mco *** pass *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7554','pass','MCO');
CALL "SUB8" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts772.mco *** fail *** "
* EXEC SQL INSERT INTO CTS1.TESTREPORT
* VALUES('7554','fail','MCO');
CALL "SUB9" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
* EXEC SQL COMMIT WORK;
CALL "SUB10" USING SQLCODE SQLSTATE
MOVE SQLCODE TO SQL-COD
******************** END TEST7554 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.0 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
